Sewage Sludge Treatment Equipment For Waste And Recycling Available In Colorado
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It consists of three chambers, one for mixing, one for maturation and one for collecting the mature polyelectrolyte at the optimum point for use. The retention time of each chamber is 30 minutes. It includes an anti-condensation nozzle for the exit of the polyelectrolyte. It has a double helix to favour mixing. It can work with both powdered and emulsified polyelectrolyte. Continuous operation. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It facilitates sludge treatment making sludge dewatering more cost effective and efficient. Toro Equipment’s Sludge Conditioning Tank (TAF) is a vertical cylindrical GRP tank that allows the chemical conditioning of sludge, facilitating filtration or decantation ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Can work with both powdered and emulsified polyelectrolyte. Continuous operation. Made of stainless ...
-
Manufactured by Meri Environmental Solutions GmbHbased in GERMANY
After dewatering, mechanical pressing usually achieves the highest possible final dry content at the lowest possible disposal costs (based on weight). In the case of thermal recycling, for example, the highest calorific values can be achieved because of the lower moisture content. State-of-the-art screw presses have prevailed over belt filter presses in high dry content dewatering. Screw press ...
-
Manufactured by Resource Recycling Industries GmbHbased in GERMANY
True to our philosophy »make products out of waste« and »real resource cycle«, we have recovered more than 99% plant available phosphor from the sewage sludge with our k-CRS-BERAHN technology. The phosphor is in the ...
-
Manufactured by System S&P GmbHbased in GERMANY
System S&P® GmbH produces supplementary products, as well as equipping our own projects with complementary technology from well-known manufacturers for: Pumping, transporting and distributing (scoop wheels, pumps, flow dividers), Removing solids and particles by means of screens, Sand filters/grease traps, Pre-aeration and homogenisation tanks, Buffering tanks (scoop wheels, pumps, ...
-
Manufactured by SewaTOR by Soldo Cavitatorsbased in ITALY
SewaTOR is the effective and efficient innovative patented sewage sludge pretreatment technology that exploits the physical phenomenon of controlled cavitation. SewaTOR has been designed as a cutting-edge wastewater treatment technology to work continuously and meet the quality standards of all manufacturers and users of WWTP in the world. SewaTOR, as a sludge disintegration system, can be ...
-
Manufactured by SkimOil, LLCbased in USA
The DAF process consists of super saturation of discharge water from the effluent end of the DAF tank with air. The super saturated water stream is then mixed with the wastestream. As pressure is removed from the saturated stream millions of microscopic bubbles form and attach themselves to the contaminants in the wastewater, thereby changing their buoyancy and floating them to the water surface ...
-
Manufactured by WEXCO Environmentalbased in USA
The High Strength Alpha Maxx allows for highly efficient BOD removal. It has a quick, economical installation and larger surface area of biofilm carriers compared to other treatment ...
-
Manufactured by Aqua Equip Technologies LLC (AET)based in USA
Wastewater treatment systems using biofilms that grow attached to a support media can be either an alternative or an improvement to the widely used suspended growth activated sludge process. When the system is operated with a single pass and without return sludge it is called FBBR (Fixed bed Biofilm reactor) or MBBR (Moving bed bio reactor). Especially for industrial pretreatment FBBRs are a good ...
-
Manufactured by Dewlink Sludge Treatment Ltdbased in UNITED KINGDOM
The complete sludge dewatering solution consisting of the MixCycle, Tubox and ...
-
Manufactured by Pyreg GmbHbased in GERMANY
Are you interested in a thermal treatment of your sewage sludge with integrated phosphorus recycling? Then the P500 system for sewage sludge is the right choice for you. With its low installation costs, high degree of efficiency and reliability, the plant is an ideal solution for decentralised sewage sludge treatment and gentle phosphorus recycling. In addition, the system can be scaled up ...
-
Manufactured by Siltbuster Limitedbased in UNITED KINGDOM
Our mix tanks are available in a range of different sizes to provide the necessary contact and reaction time required for your desired treatable flowrate and contamination. All tanks incorporate integral baffles that can be changed in position to suit the treatment philosophy with the mixing of chemicals controlled via top mounted variable speed mixer motors, making these units well suited to ...
-
Manufactured by Proline Hydralinkbased in USA
The Prolin Hydralink PHORS 10 portable sludge treatment unit is specially designed and fabricated system, of heavy duty, welded construction built around a 40' ISO hi-cube container box size. The unit is fitted with standard twist locks and carries CSC plating for easy transportation. The centrifuge unit is supplied with its own purpose built support frame for safe operation and ...
-
Manufactured by Cleveland Biotech Ltd.based in UNITED KINGDOM
The product contains: Surfactants to inhibit and disrupt filamentous growth, free enzymes and ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
Pyrofluid is a thermal treatment solution allowing for sewage sludge removal. ...
-
Manufactured by Shanghai Dubhe Environmental Protection&Technology Co.,Ltdbased in CHINA
The High-Pressure Sludge Dewatering Machine is designed with a focus on low energy consumption. It efficiently removes moisture from sludge, resulting in a significant reduction in energy requirements compared to conventional dewatering methods. Equipped with advanced technology, this machine utilizes a high-pressure system to effectively squeeze out water from the sludge. By applying pressure to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you