Only show results in Virginia? Ok

Sewage Sludge Equipment

  • Premium

    Sludge Treatment for Cement Factories

    Incineration of sewage sludge in cement factories is becoming a more and more interesting issue worldwide. Besides that municipalities can solve the disposal problem of dewatered or dried sewage sludge, cement factories offer a perfect match for the treatment necessities of sewage sludge. The dried sludge can be used as fuel and, depending on its ...

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    Colsen - Thermophilic Sludge Digestion System

    The treatment of WWTP sludge represents a considerable cost for a sewage purification plant. In case the sludge amount is lowered the associated costs can be reduced. An efficient way for the reduction of the sludge amount is thermophilic sludge digestion. When compared with conventional mesophilic digestion thermophilic conditions take care of ...

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Aquaspir - Shaftless Dewatering Screw Screen

    To meet the growing demand of small sewage treatment plants, ANDRITZ has added the Aquaspir screen SC to its product line. This shaft less screw screen not only screens and conveys the solids, but also dewaters and compacts the screenings - all in a single integrated unit.

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Screens Product line

  • Premium

    ANDRITZ - Model EcoDry - Thermal Utilization of Sewage Sludge

    EcoDry is a simple, robust, and very efficient process for mono-incineration of sewage sludge, especially suitable for decentralized plants. Depending on the requirements of the customer, the EcoDry process can be implemented with one of the three well proven drying technologies available, namely drum drying (DDS), belt drying (BDS), and fluidized ...

  • Premium

    Flottweg - Model C2E - Decanter Centrifuge

    The New C2E Decanter Centrifuges for Small Treatment Plants Flottweg presents a new era of sludge dewatering for small sewage treatment plants. The C2E decanter centrifuge was developed specifically for the dewatering and thickening of smaller sludge loading rates. It features all of Flottweg's know-how in a compact, space-saving design.Over five ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Albin - Model MG - Rotary Lobes Pump 17 à 120 m³/h

    Specifications: Flow rate: 17 to 120 m5/h. Discharge pressure: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 3 to 30 Kw. Weight: 295 - 595 kg.

    By Albin Pump SAS based in Goteborg, SWEDEN. from Albin MG Rotary Lobes Pump Product line

  • Premium

    DEVISE - Model CSDP - Containerized Sludge Dewatering Plants

    Designed and pre-fabricated to deal with small to medium size Wastewater treatment plants, offering a complete solution for the management (thickening & dewatering) of biological sludge produced by municipal sewage or industrial effluent applications.  The plant capacity in terms of waste sludge to be treated ranges from 1.0 to 9.6 m3/h ...

    By DEVISE ENGINEERING S.A. based in Athens, GREECE. from Containerized Sludge Dewatering Plants Product line

  • Premium

    Flottweg - Model C7E - Decanter Centrifuge

    Worldwide, Flottweg C series decanters around the world process 25 million liters of sewage sludge per hour. That's just about the volume of 165,000 bathtubs - every hour! The dewatering and thickening of sewage sludge plays a decisive role in the wastewater treatment process. Requirements for the quality and efficiency of sewage treatment plants ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Flottweg - Model C-XI - Sludge Dewatering Decanter

    During the development of the C-XI decanter series, Flottweg bundled its decades of experience in the dewatering of sludge and can now offer sewage treatment plants the option of saving even more. The less sewage sludge there is, the lower the costs of disposal and further treatment. With the C-XI decanter series from Flottweg, sewage treatment ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    BMI - Model DAF - Dissolved Air Flotation

    A range of modern machines compact and fully pre-fabbricated for high performance in treatment of primary water, industrial and municipal effluents. Bio Mass Impianti designs Dissolved Air Flotation systems with Know-How matured in more than 35 years activity.

    By Bio Mass Impianti srl (BMI) based in Trezzano s/N, ITALY.

  • Premium

    BioKube - Model Saturn - Decentral Wastewater Treatment Plant

    Modular treatment units that fit into multi-ple wastewater solutions, e.g. sedimenta-tion -or mechanical pre-treatment and bio-sludge removal. The Saturn units are installed above ground to minimize civil work and are typical used for systems between 100-2000m3.

    By BioKube A/S based in Tappernøje, DENMARK. from Large Package Sewage Treatment Systems Product line

  • Premium

    ASTIM - Model SAP - Sewage Acceptance Plant

    Septic sludge is delivered to treatment plants by sewage trucks. Solid content must be separated from the septic sludge before it is discharged into the treatment plant. It is necessary to clean the sludge in order to keep the load for the treatment plant as low as possible during discharge of the septic sludge. Sewage Acceptance Plant ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Screenings Technology - Inline Screening Systems Product line

  • Premium

    Albin - Model MG - Rotary Lobes Pump 2 to 25 m³/h - up to 5 bar

    Specifications: Flow rate: 2 to 25 m 5/h. Discharge pressure: up to 5 bar. Suction lit: -5mCe. Suction / discharge: DN50-80. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2  1.5 to 5.5 Kw. Weight: 150 - 200 kg.

    By Albin Pump SAS based in Goteborg, SWEDEN. from Albin MG Rotary Lobes Pump Product line

  • Premium

    Albin - Model MG - Rotary Lobes Pump 90 to 300m³/h - up to 5 bar

    Specifications: Flow rate: 90 to 300 m 3/h. Pressure discharge: up to 5 bar. Suction lift: -5mCe. Suction/ discharge: DN80-150. Body: IRON GG30. Lobes (bean): Cast IRON coated NBR-V1TON-PU-EPDM. Seal: Double radial seal, grease lubricated. Wearing plate: Galvanized steel. Motor: Motor IE2-IE3 11 - 55 Kw. Weight: 1225 -1365 kg.

    By Albin Pump SAS based in Goteborg, SWEDEN. from Albin MG Rotary Lobes Pump Product line

  • Premium

    Flottweg - Model OSE - Decanter

    An OSE Decanter is specifically designed and adapted to the thickening of sludge. This decanter centrifuge therefore has significantly better separation qualities than other decanter centrifuges. In addition to a constant thickened sludge concentration, its low polymer consumption of one or two grams per kilogram of dry solids relieves the burden ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    Flottweg - Model HTS - Decanter

    Transport and disposal costs, at over 70 percent, represent by far the largest cost item in sludge dewatering. A powerful dewatering assembly is thus an important criterion. With a Flottweg HTS Decanter in the C series, you can achieve the highest possible total dry solids in the dewatered sludge, thereby continuously saving on transport and ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Premium

    ASTIM - Sewage Treatment Plants

    Astim package unit plants with full aerobic activated sludge processes eliminate the odor nuisance and other disturbing problems of sewage.There are two kinds of package system. One of them is Sequential Batch Reactor (SBR), the other one is Continuous System (CSR).

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Package Type Treatment Systems Product line

  • Premium

    KAHL - Sewage Sludge Pelleting Plants

    A FLEXIBLE TECHNOLOGY - Compacted and dust-free municipal and industrial sewage sludge can be treated further at low costs.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Recycling Industry Product line

  • Model 302 - Centrifugal Sludge Compression Performance Tester

    Centrifugal tester can be used to test the compression force of the obtained sludge. The sample of known concentration into the sludge from the crush in order to be simulated corresponding to the rotational speed of rotation of the pressure. For example: 50g pressure within 5 min, and a 3.5 meter deep concentration process the same effect. And CST ...

    By Shanghai Besters Ltd based in Shanghai, CHINA. from Sewage / Waste Water Analysis Instruments (Lab) Product line

  • Model 306 - SSVI Sludge Settling Tester

    SSVI readings measured sludge sedimentation rate, turbidity and MLSS are indicative. Measuring instrument with standard SSVI 305 matching. The infrared beam irradiation apparatus, the sludge is absorbed by the infrared light energy associated with the solids. Thus, compared to the sludge sedimentation clarified supernatant will absorb more light, ...

    By Shanghai Besters Ltd based in Shanghai, CHINA. from Sewage / Waste Water Analysis Instruments (Lab) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you