Sewer Cleaning Equipment For Waste And Recycling Available In Bahamas
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-VAC Vacuum Flushing System is designed to flush storm water, surface water, combined sewage/storm, raw sewage storage tanks, and equalization basins. The ACU-VAC can be used in circular storm tanks (up to 65m diameter), rectangular storm tanks (up to 150m in length), and sewer networks (up to 250m in length). The ACU-VAC is designed to have a tank floor gradient between 0.5-2%. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-LAM Lamella Baffle System is designed to reduce floating debris from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin overflows. The ACU-LAM is ideal for installations where structural constraints do not allow for the installation of an ACU-SELF Self-Adjusting Floating Baffle or an ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 330 ARP high-pressure plunger pump provides a max. operating pressure of 320 bar and a max. flow rate of 537 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by ZetaÅŸ Kimyabased in TURKEY
Oil separators are a product used in many sectors and produced to separate different variations of oils. It is used to separate the oil entering the network from the water. Oil separators can be produced from various materials. Examples of these are AISI 304 and HDPE. ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
During a storm event, the high volume of flowing water can overload the sewer systems and storage basins causing an overflow to occur, flooding the entire system. The ACU-VORTEX Vortex Flow Regulator is designed to regulate the flow from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Lateral cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex approval. VEGAPULS C 22 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Multiple Applications with One Nozzle. Cuts with Water Rather than Chain. Controlled Rotational Speed. Expansion Kit up to 24” Pipe Diameter (Available). Individual Jets for Cleaning, Propulsion, Penetration, & Rotation. Rear Jets can be Plugged and Forward Jets Open to be Used for Manhole ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Royal Nozzle, because of its wider angles, is more diverse, because it allows more penetrating power to clean pipes better than other nozzles. With 12 alternating jets at 22° and 32°, the Royal Nozzle is designed for all-around cleaning of pipes up to 48” in diameter. The sheer weight of the Royal Nozzle keeps it on the bottom of the pipe for effective cleaning when other ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-DRUM Pivoting Drum System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any batch ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex Style 790 Low Headloss In-Line Rubber Check Valve design allows for a passive flow and allows the valve to be installed without having to do any modifications to existing structures or costly pre-install planning. The unique fold away design of the inner sleeve also allows for a near full port flow, allowing for quick drainage. The ProFlex Style 790 Low Headloss In-line Rubber Check ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Standard Features: Microprocessor PLC Controls. Heavy Duty 5 micron Sediment Cartridge Pre-filter with Pressure Gauges. Unique DLP series Nanofiber filtration technology. High Efficiency 316 Stainless Steel Centrifugal Pump. Automatic Inlet Feed Shut off Valve. FRP Pressure Vessels. Permeate & Concentrate Flow Meters. Liquid Filled Pressure Gauges. Permeate Conductivity Monitor. Heavy Duty ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With ceramic measuring cell. Application area: The hydrostatic absolute pressure transmitter with ceramic measuring cell is ideal for level measurement of water/wastewater, as well as level measurement in deep wells or in tanks on ships. Maximum cable length = 1000 m. The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Optical Brighteners (OBAs) or Fluorescent Whitening Agents (FWAs) are added to products, such as laundry soaps, detergents, or cleaning agents. Fabrics or materials absorb OBAs during the washing or cleaning process. When illuminated by ultraviolet light, they fluoresce and make products and fabrics appear brighter. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 150 ARP high-pressure plunger pump provides a max. operating pressure of 320 bar and a max. flow rate of 402 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
These nozzles are the same, except for the materials that are used to make them. The use of either nozzle, as long as they are centered within the pipe, will produce more effective results. If the nozzle is not centered, we will not be able to ensure maximum performance and premature wear. Aluminum nozzles must be run on skids; if not, the warranty will be ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Hand Injector Nozzle provides the capability of water flow up to 25 GPM and up to 4000 PSI. Hand Injector’s single jet cuts through roots faster because of the water pressure through the jetted ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you