Sewer Cleaning Equipment For Waste And Recycling Available In Belarus
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-RAKE Self-Cleaning Bar Screen System is designed to remove debris from storm water overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The TRU-RAKE self-cleaning bar screen provides an economic and effective solution to protect against coarse floating and suspended matter entering receiving streams. The TRU-RAKE self-cleaning bar screen is ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-JET Jet Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32 000 gpm (2 000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET Jet Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is well ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-LAM Lamella Baffle System is designed to reduce floating debris from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin overflows. The ACU-LAM is ideal for installations where structural constraints do not allow for the installation of an ACU-SELF Self-Adjusting Floating Baffle or an ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Available for hoses from .75” through 1.5”, KEG’s Sewer Nozzle is truly a “Heavy Weight” in the sewer and storm water cleaning industry. The Sewer Nozzle ranges in weight from 17 to 22 pounds and is sure to stay centered in the bottom of the pipe for effective cleaning action. The 15° and 20° jet angles give the operator high wall force with a wide water ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Optical Brighteners (OBAs) or Fluorescent Whitening Agents (FWAs) are added to products, such as laundry soaps, detergents, or cleaning agents. Fabrics or materials absorb OBAs during the washing or cleaning process. When illuminated by ultraviolet light, they fluoresce and make products and fabrics appear brighter. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
During a storm event, the high volume of flowing water can overload the sewer systems and storage basins causing an overflow to occur, flooding the entire system. The ACU-VORTEX Vortex Flow Regulator is designed to regulate the flow from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Multiple Applications with One Nozzle. Cuts with Water Rather than Chain. Controlled Rotational Speed. Expansion Kit up to 24” Pipe Diameter (Available). Individual Jets for Cleaning, Propulsion, Penetration, & Rotation. Rear Jets can be Plugged and Forward Jets Open to be Used for Manhole ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1503 high-pressure plunger pump provides a max. operating pressure of 200 bar and a max. flow rate of 402 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The Pump Action Screen (PAS) is a simple and robust CSO mechanical screen which consists of a half round stainless steel basket with 6mm perforations, submersible pump, distribution pipework, and a venturi. It is designed to prevent the discharge of non-biodegradable solids greater than 6mm in two directions. The screening debris is scoured from the underside of the screen basket and punched ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Royal Nozzle, because of its wider angles, is more diverse, because it allows more penetrating power to clean pipes better than other nozzles. With 12 alternating jets at 22° and 32°, the Royal Nozzle is designed for all-around cleaning of pipes up to 48” in diameter. The sheer weight of the Royal Nozzle keeps it on the bottom of the pipe for effective cleaning when other ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-DRUM Pivoting Drum System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any batch ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1003 high-pressure plunger pump provides a max. operating pressure of 150 bar and a max. flow rate of 257 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Standard Features: Microprocessor PLC Controls. Heavy Duty 5 micron Sediment Cartridge Pre-filter with Pressure Gauges. Unique DLP series Nanofiber filtration technology. High Efficiency 316 Stainless Steel Centrifugal Pump. Automatic Inlet Feed Shut off Valve. FRP Pressure Vessels. Permeate & Concentrate Flow Meters. Liquid Filled Pressure Gauges. Permeate Conductivity Monitor. Heavy Duty ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With ceramic measuring cell. Application area: The hydrostatic absolute pressure transmitter with ceramic measuring cell is ideal for level measurement of water/wastewater, as well as level measurement in deep wells or in tanks on ships. Maximum cable length = 1000 m. The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SCREEN Fine Slotted Overflow Screen System is designed to remove debris from storm water overflow systems, combined sewer overflow (CSO) systems and sanitary sewer overflow (SSO) systems. The ACU-SCREEN fine slotted screen provides an economic and effective solution to protect against floating and suspended matter entering receiving streams. The ACU-SCREEN fine slotted screen is designed ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Hand Injector Nozzle provides the capability of water flow up to 25 GPM and up to 4000 PSI. Hand Injector’s single jet cuts through roots faster because of the water pressure through the jetted ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech SWM Sea Water Makers provide drinking and process water from sea water. Lenntech systems are ready-to-use, skid mounted and easy to operate. Lenntech systems can offer: Compact design, low energy demand and high recovery; Fully automatic system, microprocessor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you