Sewer Cleaning Equipment For Waste And Recycling Available In Manitoba
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The Pump Action Screen (PAS) is a simple and robust CSO mechanical screen which consists of a half round stainless steel basket with 6mm perforations, submersible pump, distribution pipework, and a venturi. It is designed to prevent the discharge of non-biodegradable solids greater than 6mm in two directions. The screening debris is scoured from the underside of the screen basket and punched ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The OMG Nozzle is a Tier Three Fluid Mechanics large nozzle suitable for storm drain or sewer cleaning applications where pipe walls may be compromised and pressure on the pipe wall is not desired. The OMG is ideal for cleaning deteriorated pipe, corrugated metal pipe, or concrete pipe. The OMG Nozzle offers superior performance in damaged or deteriorated pipe. The Tier Three design offers the ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
These nozzles are the same, except for the materials that are used to make them. The use of either nozzle, as long as they are centered within the pipe, will produce more effective results. If the nozzle is not centered, we will not be able to ensure maximum performance and premature wear. Aluminum nozzles must be run on skids; if not, the warranty will be ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Ejector Nozzles are suitable for cleaning water-bearing pipes only. The unique arrangement of the nozzle inserts results in the “soft“ cleaning effect, which makes the Ejector Nozzles suitable for cleaning older sewer networks. This nozzle uses the water flowing within the sewer to aid the water coming from the pressurized hose, thus utilizing the advantages of both cleaning ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
During a storm event, the high volume of flowing water can overload the sewer systems and storage basins causing an overflow to occur, flooding the entire system. The ACU-VORTEX Vortex Flow Regulator is designed to regulate the flow from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Virtually eliminates blowing toilets with 12 forward jets that equalize air pressure in the ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-JET Jet Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32 000 gpm (2 000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET Jet Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is well ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can be used in agricultural and industrial applications ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLAP Check Element System is designed to prevent flooding and backflows caused by high downstream water levels. The ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 550 ARP high-pressure plunger pump provides a max. operating pressure of 400 bar and a max. flow rate of 819 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Oil separators are a product used in many sectors and produced to separate different variations of oils. It is used to separate the oil entering the network from the water. Oil separators can be produced from various materials. Examples of these are AISI 304 and HDPE. ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The KleenSight Camera Nozzle offers our customers the ability to clean sewer and storm lines while recording upright image video. Only a jetter hose connection is required, no cables or wires. Videos files are stored onboard and automatically date and time stamped for easy Wi-Fi downloading to mobile phones, tablets and computers. Videos can be emailed or sent to the cloud for sharing with ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-TIP tipping bucket is a sediment flushing system designed to remove settled debris from reservoir floors, such as stormwater or CSO retention tanks and sanitary equalization tanks. The system operates by releasing a torrent of fresh water stored in the tipping bucket. The resulting flushing wave progresses down the entire length of the flushway pushing the settled debris ahead of it. The ...
-
PremiumManufactured by Trojan Technologies - Veraltobased in CANADA
Chlorine gas has traditionally been used for wastewater disinfection for many years. Sodium Hypochlorite (liquid bleach) is an alternative to chlorine gas; however, it is more costly and has the same environmental concerns. UV disinfection can easily be retrofitted into an existing chlorine contact tank and has significant benefits compared to chlorine ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Lateral cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex approval. VEGAPULS C 22 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
PremiumManufactured by Mobile Power Equipment, LLC (MPE)based in USA
4GPM 4200 PSI Standard Features: Honda GX390 Gas Engine Belt Driven Triplex Ceramic Plunger Pump 4-Wheel Heavy Duty Steel Cart Design with Wheel Locking Brake System All Units are Completely Factory Assembled in The USA and Delivered Ready to Operate. INCLUDES: Hose Reel W/300'x 3/8" Jetter Hose Selective Hydro - Pulse (Pulsation On Demand) Easy Start Valve - No Load Starting 3 - Jetter Nozzles ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 330 ARP high-pressure plunger pump provides a max. operating pressure of 320 bar and a max. flow rate of 537 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you