Sewer Cleaning Equipment For Waste And Recycling Available In Illinois
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can be used in agricultural and industrial applications ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 400 ARP high-pressure plunger pump provides a max. operating pressure of 340 bar and a max. flow rate of 640 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1503 high-pressure plunger pump provides a max. operating pressure of 200 bar and a max. flow rate of 402 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested design operates by only allowing any excess water ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Virtually eliminates blowing toilets with 12 forward jets that equalize air pressure in the ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 2503 high-pressure plunger pump provides a max. operating pressure of 250 bar and a max. flow rate of 332 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 150 ARP high-pressure plunger pump provides a max. operating pressure of 320 bar and a max. flow rate of 402 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
Ejector Nozzles are suitable for cleaning water-bearing pipes only. The unique arrangement of the nozzle inserts results in the “soft“ cleaning effect, which makes the Ejector Nozzles suitable for cleaning older sewer networks. This nozzle uses the water flowing within the sewer to aid the water coming from the pressurized hose, thus utilizing the advantages of both cleaning ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-LAM Lamella Baffle System is designed to reduce floating debris from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin overflows. The ACU-LAM is ideal for installations where structural constraints do not allow for the installation of an ACU-SELF Self-Adjusting Floating Baffle or an ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-JET Jet Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32 000 gpm (2 000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET Jet Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is well ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-VAC Vacuum Flushing System is designed to flush storm water, surface water, combined sewage/storm, raw sewage storage tanks, and equalization basins. The ACU-VAC can be used in circular storm tanks (up to 65m diameter), rectangular storm tanks (up to 150m in length), and sewer networks (up to 250m in length). The ACU-VAC is designed to have a tank floor gradient between 0.5-2%. ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Stallion Nozzle is a Tier Three Fluid Mechanics medium-sized nozzle excellent for storm drain or sewer cleaning applications where pipes are heavily exposed to debris, or where pipes are heavily damaged or weakened. The Stallion is a fantastic flushing nozzle, however, due to the angle of the jets, the Stallion should not be used to clean large pipe walls. The Stallion Nozzle is ideal for ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLO Compact Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7 100 gpm (450 L/s) for upstream water levels varying from 0 to 26 feet (8 m). The TRU-FLO Compact Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Standard Features: Microprocessor PLC Controls. Heavy Duty 5 micron Sediment Cartridge Pre-filter with Pressure Gauges. Unique DLP series Nanofiber filtration technology. High Efficiency 316 Stainless Steel Centrifugal Pump. Automatic Inlet Feed Shut off Valve. FRP Pressure Vessels. Permeate & Concentrate Flow Meters. Liquid Filled Pressure Gauges. Permeate Conductivity Monitor. Heavy Duty ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Hydro-X Hand Injector Nozzle provides the capability of water flow up to 25 GPM and up to 4000 PSI. Hand Injector’s single jet cuts through roots faster because of the water pressure through the jetted ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex Style 790 Low Headloss In-Line Rubber Check Valve design allows for a passive flow and allows the valve to be installed without having to do any modifications to existing structures or costly pre-install planning. The unique fold away design of the inner sleeve also allows for a near full port flow, allowing for quick drainage. The ProFlex Style 790 Low Headloss In-line Rubber Check ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The Pump Action Screen (PAS) is a simple and robust CSO mechanical screen which consists of a half round stainless steel basket with 6mm perforations, submersible pump, distribution pipework, and a venturi. It is designed to prevent the discharge of non-biodegradable solids greater than 6mm in two directions. The screening debris is scoured from the underside of the screen basket and punched ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1003 high-pressure plunger pump provides a max. operating pressure of 150 bar and a max. flow rate of 257 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
KEG’s Sewer Flush Nozzle is a heavy duty cleaning nozzle that provides superior results while being more cost competitive. The power of the Sewer Flush’s 15 and 25 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer Flush Nozzle is available with replaceable steel or titanium ceramic inserts and is an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you