Shredder Fractions Equipment For Waste And Recycling Available In Solomon Islands
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Granutech has products that are well suited to process materials with the ultimate goal of producing energy from ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Lithium-ion batteries (LIBs) and electric vehicle (EV) batteries require special attention and care when shredding them for the purposes of recycling due to the possibility of fire from the oxidation of the lithium, and so Shred-Tech® provides a quality solution with our industrial Aqueous Shredder. With this LIB and EV battery shredder, you can safely and efficiently liberate and reduce the ...
-
Manufactured by swissRTec AGbased in SWITZERLAND
Developed especially to handle pre-shredded, hard and wear intensive composite materials, the Delamination Mill from swissRTec is an excellent solution for the processing of electronic waste, auto shredder residue, printed circuit boards and materials from other waste streams. The shredded input materials enter the Delamination Mill at the top. Very strong forces act on the materials, positively ...
-
Manufactured by STOKKERMILL RECYCLING MACHINERY | Seltek Srlbased in ITALY
Refiner industrial shredder for waste materials, e-waste and e-scrap. Tasmanian Devil is an industrial shredder-refiner extremely versatile which allows to control the sizes of the output material thanks to the presence of the classifier screen. Tasmanian Devil can operate without classifier screen where a precise output size is not required so it can be used as a primary ...
-
Manufactured by Promeco SpAbased in ITALY
The PES F matrix briquetting machine is the most simple, flexible, efficient and effective solution to the problems of densification and sintering. The extreme flexibility of the machine allows processing of different ...
-
Manufactured by Promeco SpAbased in ITALY
The PES V matrix briquetting machine is the most simple, flexible, efficient and effective solution to the problems of densification and sintering. The extreme flexibility of the machine allows processing of different ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Eriez new FinersSort Metal Recovery System is the ultimate in fine particle metal reclamation. FinesSort's series of powerful magnetic components recover valuable ferrous and non-ferrous metals from the fines waste stream in scrap ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
The Eldan Separation Table is an essential machine for material separation in recycling of e.g. Cables (aluminium or copper), Electronic and electrical waste (i.e. WEEE), Aluminium scrap, Tyres (upgrading quality by removing foreign objects), Shredder light fraction ...
-
Manufactured by SGM Gantry S.p.A. - SGM Magneticsbased in ITALY
Designed with a large concentric rotor for maximum exposure of material to magnetic field. Concentric rotor design allows for the use of large permanent magnet blocks and for disposing of maximum magnetic energy. This combined with high speed rotor (up to 3,000 rpm) provides superior metal recovery and purity ...
-
Manufactured by SGM Gantry S.p.A. - SGM Magneticsbased in ITALY
Designed with a concentric rotor for maximum exposure of material to mag-netic field. Concentric rotor design allows for the use of large permanent magnet blocks and for disposing of maximum magnetic energy. This combined with high speed rotor (from 3.000 up to 4.800 rpm) provides superior metal re-covery and purity performance. Ideal for performing both an instantaneous and progressive ...
-
Manufactured by Hankook Matics Co.,Ltd (HKM)based in SOUTH KOREA
Shredder drum separator is combined the suction force of the electromagnet and permanent magnet to move absorbed metals to discharging point. Below drawings shows four installation options to be suitable for various site ...
-
Manufactured by Erdwich Zerkleinerungs-Systeme GmbHbased in GERMANY
The champions for hard and brittle materials. Hammer mills are particularly suitable for metal scrap, electrical and electronic scrap or chips made of steel, aluminum, but also other materials. And due to the easy adjustability during operation, also the balling of non-ferrous metals is no problem. The result size is variable and can be changed during operation. This product feature in particular ...
-
Manufactured by Erdwich Zerkleinerungs-Systeme GmbHbased in GERMANY
The champions for hard and brittle materials. Hammer mills are particularly suitable for metal scrap, electrical and electronic scrap or chips made of steel, aluminum, but also other materials. And due to the easy adjustability during operation, also the balling of non-ferrous metals is no problem. The result size is variable and can be changed during operation. This product feature in particular ...
-
Manufactured by WENDT CORPORATIONbased in USA
The ferrous downstream system is designed to separate and recover shredded steel. For the best results, a combination of large axial pole drum magnets and air classification are used. We also offer systems utilizing a series of drum magnets if lesser quality shred is acceptable. ...
-
Manufactured by PSR Industrieanlagen- und Verfahrenstechnik GmbHbased in GERMANY
This separation system was developed to provide the possibility for mechanical plastic recycling to detach mono-fraction plastics from mixed-plastic waste. The aim of a purity of variety that enables the re-use of secondary materials thus obtained for the production of new plastic products has been ...
-
Manufactured by hamos GmbHbased in GERMANY
hamos KWS electrostatic separators are used for dry separation of metals from plastics and other non-conductive materials. Even finest metal particles of < 0.1 mm can be separated.It is therefore an especially efficient way to regain valuable metals by separating them from plastics or to clean plastics from metal parts before further ...
-
Manufactured by Fritsch GmbH - Milling and Sizingbased in GERMANY
Patented power team: With the extra powerful, patented FRITSCH Cutting Mill Combination of the Universal Cutting Mill PULVERISETTE 19 large with variable rotational speed of 50-700 rpm and the Universal Cutting Mill PULVERISETTE 19 with a variable rotational speed of 300-300 rpm, as well as the associated FRITSCH high-performance Cyclone separator, it is possible, for example, to process 2 litres ...
-
Manufactured by TRS BVbased in NETHERLANDS
Eddy Current separator, coarse-, medium coarse or fines suitable (IBA-proof, galvanized frame and stainless steel platework). Container-frame based construction for easy set-up, breakdown and transportation. Totally galvanized construction (IBA-proof!). (De-)mountable stairways and platforms. Control cabinet IP65 ‘outside’ version provided with TRS Modular Plant Control System (MPCS), ...
-
Manufactured by Continental Biomass Industries, Inc. (CBI)based in USA
The powerful snapping of screen sections generates a trampoline-like material movement - accelerating, separating, and dispersing particles to allow smaller particles to reach the screen surface and pass through freely. The combination of high acceleration (up to 50 g’s) and continuous screen flexing helps prevent blinding, plugging, clogging, caking ...
-
Manufactured by Seidbased in NORWAY
There are plenty of good reasons for switching from standard to alternative fuels. As well as the money in your pocket, using alternative fuels conserves the world’s resources. Recycling fibres, chippings or for example plastic shreddings also makes sense in the long term if the combustion processes are optimised using appropriate modules and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you