Shredder Residues Equipment For Waste And Recycling Available In South Carolina
-
PremiumManufactured by ERGAbased in TURKEY
Line for nonferrous scrap cleaning, sorting from contamination and magnetic inclusions (ferrous ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Granutech has products that are well suited to process materials with the ultimate goal of producing energy from ...
-
Manufactured by Wuxi Shredwell Recycling Technology Co.,Ltdbased in CHINA
Vertical Shredder: are mainly applied in applications processing preshredded metal scrap from twin shaft shredding systems to produce required regular output material. Shredwell VS series Vertical Shredder is aggressively size reduce and density pre-shredded material whilst liberating the various different fractions and allowing for better separations and reduced transport costs. The breakers in ...
-
Manufactured by Genox Recycling Tech Co. Ltdbased in CHINA
OZMA Vertical Shredders are mainly applied in applications processing pre-shredded metal scrap from twin shaft shredding systems. These machines aggressively size reduce and densify pre-shredded material whilst liberating the various different fractions and allowing for better separations and reduced transport costs, The breakers in the upper part of the chamber smash the material until it is ...
-
based in USA
Since 1991, ESR International LLC has applied its bi-directional dense medium separation technology to the recycling of automobile and industrial waste. For many years ESR’s principle client in this regard has been the Galloo Group. At first the Galloo staff was not convinced that a carrot separator could compete with the classical dense medium separators on the market at that time. So they set ...
-
Manufactured by Continental Biomass Industries, Inc. (CBI)based in USA
This TAPER-SLOT Screen is commonly utilized for the classification of bulky materials. The TAPER-SLOT Screen performs where other screens fail. It is the preferred alternate to inherently problematic screens such as Finger Screens, perforated screens, wire mesh screens, ...
-
Manufactured by Promeco SpAbased in ITALY
Promeco has engineered a system for the production of RDF (refuse derived fuel) from ASR automotive shredder residues.Vehicles at the end of their life are, after remediation (removal of fluids, oils, fuels, batteries), demolished. About 75% of the material components of the vehicle is recovered. In particular, the destruction and demolition/crushing of vehicles allows to recover the metal ...
-
Manufactured by Dings Magnetics Groupbased in USA
Dings Eddy Current Separators use powerful rare earth magnets for recovering non ferrous metals from recyclables, plastics, glass, material processed at composting or waste-to-energy facilities, automotive shredder residue, and other processed material or ...
-
Manufactured by Buntingbased in USA
Magnetic Separation of Small Fraction Stainless Steel 5/8” minus and Wire-Cleaning ...
-
Manufactured by Cogelme S.r.l.based in ITALY
Sortech Disc Screen and Star Screen are designed to suit individual applications and materials types by varying the distance between the discs/stars, the speed of rotation and the angle of the screen. Separating with Sortech Screens is precise, simple and economical: optimal choice for recycling professionals. Master-class engineering helps handle separation with advanced conditions, ensuring ...
-
Manufactured by TST Overseas GmbHbased in GERMANY
ASR - Automotive Shredder Residue fractions consist of a mixture of different recyclable materials. After separating the ASR into SLF (shredder light fraction) and SHF (shredder heavy fraction), there are different steps to recover valuable materials. TST Overseas offers complete reliable solutions and machines like ZigZagSifters, Cross Flow Sifters, Milling machines, Screening machines and ...
-
based in CHINA
We are searching for reliable suppliers of E-METER SCRAP / TELECOM SCRAP / E WASTE SCRAP / E METER SCRAP / LOW GRADE BOARD SCRAP / SHREDDED LOW GRADE CIRCUIT BOARD SCRAP / GAS METER SCRAP / NON FERROUS BREAKAGE SCRAP/SHREDDER RESIDUES , IF any of above stock available please confirm in return your yard details/ contact person / address so we can arrange a meeting and start some business ...
-
Manufactured by SGM Gantry S.p.A. - SGM Magneticsbased in ITALY
Designed with a large concentric rotor for maximum exposure of material to magnetic field. Concentric rotor design allows for the use of large permanent magnet blocks and for disposing of maximum magnetic energy. This combined with high speed rotor (up to 3,000 rpm) provides superior metal recovery and purity ...
-
Manufactured by Promeco SpAbased in ITALY
The PES F matrix briquetting machine is the most simple, flexible, efficient and effective solution to the problems of densification and sintering. The extreme flexibility of the machine allows processing of different ...
-
Manufactured by Urban Mining Solutions GmbHbased in GERMANY
The RCC is a very flexible and universal machine for first treatment, dismantling, delamination and cleaning for many different input ...
-
Manufactured by Carl Padberg Zentrifugenbau GmbHbased in GERMANY
The continuously operating de-oiling centrifuge KSE is suitable for all kinds of metal chips, grinding sludge and shredder material. The centrifuge contains a hydraulically driven lifting base that periodically discharges the chips upwards over the slotted-hole screen. The centrifuge is filled continuously with chips by feed conveyors. The fixed lifting intervals produce very consistent de-oiling ...
-
Manufactured by WENDT CORPORATIONbased in USA
The ferrous downstream system is designed to separate and recover shredded steel. For the best results, a combination of large axial pole drum magnets and air classification are used. We also offer systems utilizing a series of drum magnets if lesser quality shred is acceptable. ...
-
Manufactured by swissRTec AGbased in SWITZERLAND
Developed especially to handle pre-shredded, hard and wear intensive composite materials, the Delamination Mill from swissRTec is an excellent solution for the processing of electronic waste, auto shredder residue, printed circuit boards and materials from other waste streams. The shredded input materials enter the Delamination Mill at the top. Very strong forces act on the materials, positively ...
-
Manufactured by STOKKERMILL RECYCLING MACHINERY | Seltek Srlbased in ITALY
Refiner industrial shredder for waste materials, e-waste and e-scrap. Tasmanian Devil is an industrial shredder-refiner extremely versatile which allows to control the sizes of the output material thanks to the presence of the classifier screen. Tasmanian Devil can operate without classifier screen where a precise output size is not required so it can be used as a primary ...
-
Manufactured by SGM Gantry S.p.A. - SGM Magneticsbased in ITALY
Designed with a concentric rotor for maximum exposure of material to mag-netic field. Concentric rotor design allows for the use of large permanent magnet blocks and for disposing of maximum magnetic energy. This combined with high speed rotor (from 3.000 up to 4.800 rpm) provides superior metal re-covery and purity performance. Ideal for performing both an instantaneous and progressive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you