Only show results available in Connecticut? Ok

Single Shaft Shredding Applications

  • Premium

    Recycling Equipment for Plastics Industry

    Shredders for Plastics Scrap Size Reduction. Low cost alternatives for your waste plastics recycling equipments. Shredders for Plastic Scrap and E-scrap. Harden Machinery supplies single shaft and two/four shaft shear shredders for plastic scrap recycling and other solid waste size reduction applications. All of our machine are made in Chine with European design and Chinese cost. Our machines are being used in China and around the world.

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Shredders and crushers for casting components

    Many light and non-ferrous metal foundries are faced with the difficult hurdle of dealing with bulky waste consisting of punching burrs or rejects, which are a hindrance to optimal processing. Casting machines which involve the investment of many millions of euros cannot be used to their full capacity because production waste cannot be removed quickly enough. But it does not have to be that way!

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Shredding Technology for Refuse Derived Fuels (RDF) - Energy

    Refuse-derived fuel (RDF) is a fuel produced from various types of wastes such as Municipal Solid wastes (MSW), industrial wastes or commercial wastes. RDF consists largely of combustible components of such wastes, as non-recyclable plastics, paper cardboard, metal, and rubber. These fractions are separated by different processing steps, such as screening, air classification, ballistic separation, separation of ferrous and non-ferrous materials, glass, stones and other foreign materials and shredding into a...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Shredder solutions for the hazardous waste processing sector

    Hazardous waste processing is a challenging work, it is important the disposal of hazardous waste is both extremely safe and reliable. Shredding machine is one of most vital part in hazardous waste processing. HARDEN manufactures hazardous waste shredders for hazardous waste processing. Such as radioactive waste, steel drums containing hazardous materials or bacterially contaminated medical waste. Our single-shaft shredders are particularly suitable for shredding large volumes of hazardous waste for disposal in...

    By Harden Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling equipments for shredding & reducing medical waste

    Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring shredders that can effectively process the variety of materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Shredding solutions for cardboard and packaging recycling industry

    Cardboard and packaging recycling is intended to recover cellulose from the material treated. It is estimated that we can pulp the material up to six or seven times and that over 50% of the product cardboard produced in Europe comes from the recovery of cellulose. For this purpose, SatrindTech proposes two-shaft shredders for the first application and single-, three- and four- shaft shredders for the second.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for pharmaceutical industry

    The shredding process of this pharmaceutical waste can be carried out with the three type of machines by SatrindTech: the single shaft, the three- and the four-shaft shredders. The purpose of the process is twofold: to recover the plastic blister and to destroy expired medicines safely.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for textile and carpets industry

    All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for pallets, dry wood in general and green wood industry

    The treatment of this material is mainly for a reuse of this material for energy purpose: with wood shredding we refer to pallet and dry wood shredding while with green wood we consider the crashing of the gardening or agricultural waste. Depending on the desired final size, with dry wood different types of shredders can be used: a crusher or a shredder with T-blades can be used for a mere volume reduction of the material or single-, three- and four- shaft shredders if the purpose is getting a size controlled....

    By SatrindTech Srl based in Arluno, ITALY.

  • Recycling of Plastic

    For the recycling of plastic we offer a wide range of solutions:shredding, separation, granulating , cleaning , extruding.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredders for Plastic Materials

    The plastic is the material recoverable and reusable for excellence. It can be reused many times and its recover means environmental safeguard.

    By SA Eng. based in San DonĂ  di Piave, ITALY.

  • Shredding solutions for SRF (specified recovered fuel) sector

    The SRF (Solid Recovered Fuel / Specified Recovered Fuel) is a fuel produced by shredding and dehydrating MSW (plastic, paper, textile fibers, etc.), of non-hazardous waste (both urban and special) through appropriate treatments from other non-combustible materials, such as glass, metals and inert.

    By SatrindTech Srl based in Arluno, ITALY.

  • Recycling of Paper / Recycling of Cardboard

    The recycling of paper and cardboard often requires a shredding process to improve the pulping process or to put more weight into the bale. The M&J Shredder line is very effective for reducing the amount of fines in the shredded product. For small volume applications we also offer the WEIMA Single shaft shredder. In many cases these units are used in smaller paper recycling applications were the material is baled. The benefit of shredding before baling is an increased bale weight, and we also offer separation...

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Shredding solutions for paper waste industry

    The shredding of paper waste is carried out for two main purposes: shredding for recycling or shredding for destroying. In the first case we have a volumetric reduction (done with two-shaft shredders) in order to obtain the ideal size for proceeding with baling or pressing. In the second case, is more related to the safe destruction of the information contained in private and confidential documents, which dimensions have to be done in according to the DIN 66399 directive. This establishes the security parameters...

    By SatrindTech Srl based in Arluno, ITALY.

  • Waste handling solutions for the waste splitting sector

    Mechanical treatment as the foundation for recycling: The reuse of materials and energy from waste is central to modern waste management. The foundation for it is laid by mechanical preparation in the form of waste splitting. In it, recyclables are recovered from the waste stream and high-yield combustibles are separated out for further processing as refusederived fuels (RDF). The remaining residue fraction can be stabilized and then landfilled.

    By Komptech GmbH based in Frohnleiten, AUSTRIA.

  • Shredding solutions for food industry

    This category includes both the wet fraction of MSW (generally collected in the appropriate compostable bags) and all that waste generated by the food industry. If treated properly, this waste can be reintroduced in the production cycle. SatrindTech proposes two-shaft shredders or bag opener for preparing the material for the subsequent steps of separation and composting cycle. If the industrial applications may require a controlled size of the output, the choice has to be fall onto single-, three- and four-shaft...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for refuse derived fuel (RDF) industry

    It’s the so-called Residue Derived Fuel, obtained by treating the dry fraction of the MSW that, after having carefully removed glass, metals and inert, has suitable characteristics to be used as an alternative fuel. The mix of materials are paper (less than 50%), plastic (less than 25%), textiles (less than 15%), organic (less than 15%), wood and other (less than 5%). It is mainly used in cement and steel production plants and energy production plants. SatrindTech proposes two-shaft shredders as primary...

    By SatrindTech Srl based in Arluno, ITALY.

  • Waste handling solutions for the refuse derived fuel (RDF) industry

    Waste to energy: The use of refuse derived fuel (RDF) is part and parcel of today`s regulated waste disposal. Using a selective treatment process, fractions high in calorific value are separated off from commercial and industrial waste, creating a marketable product. Depending on calorific value, composition and particle size, this fuel is used in industrial fluidised bed firings, in cement kilns and in RDF power plants.

    By Komptech GmbH based in Frohnleiten, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you