Only show results in Texas? Ok

Sludge Combustion equipment for Waste and Recycling

  • Premium

    Tri-Mer - Model Q-Scrub - Incinerator Scrubber

    Q-Scrub Incinerator Scrubber delivers scrubber efficiencies of 95-99.99%. Systems can be engineered to guarantee any outlet rating. Most stack gas emissions requirements are based on a mass emissions standard of lbs./hr. in vs. lbs./hr. out for contaminants such as HCl, Cl2, SO2, HF, etc.

    By Tri-Mer Air Pollution Control Systems based in Owosso, MICHIGAN (USA). from Wet Scrubbers Product line

  • Premium

    ENVEA - Model Mercury Instruments SM-3 - Stack Gas Monitor

    The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment ...

    By ENVEA based in Poissy, FRANCE. from Emissions - Mercury Instruments Product line

  • Premium

    ENVEA - Model SM-4 Mobile - Modular Mercury Stack Gas Monitor QAL 1 Certified

    Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with ...

    By ENVEA based in Poissy, FRANCE. from Emissions - Mercury Instruments Product line

  • Premium

    ENVEA - Model HOFI BOX - Heated Sampling System

    The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze 32M,…).

    By ENVEA based in Poissy, FRANCE. from Emissions - Sampling Systems Product line

  • Premium

    ENVEA - Model SEC BOX - Stack Gas Sampling System

    The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors ...

    By ENVEA based in Poissy, FRANCE. from Emissions - Sampling Systems Product line

  • Super Sludge Dryer

    The Super Sludge Dryer is a special equipment for sludge reduction. The sludge is dried by direct contact with hot air. The high-speed rotating crushing shaft is built in, which completely solves the problem of sludge adhesive phase. The sludge with different water content will be directly reduced to 20% , and the reduction amount will be 80% . ...

    By Benenv Co., Ltd. based in Yixing City, CHINA.

  • APC - Model MercPure Series - Mercury Emissions Control Systems

    MercPure Fixed Bed (FB) Series systems and MercPure powdered activated carbon (PAC) Series systems.

    By APC Technologies, Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Air Pollution Control Systems Product line

  • Scanship - Incinerator System

    The incinerator is designed with the very latest technology in multi-chamber, semi-pyrolysis with flue gas emissions within IMO MARPOL regulations. The incinerators are also capable of meeting EU regulations, which is in accordance with the future general demands for air emissions. The feeding technology is developed to secure a homogenous ...

    By Scanship AS based in Tønsberg, NORWAY.

  • Papermaking Suldge Recycling - Model GLOBALZJN - J09

    Papermaking sludge dryer is a kind of necessary equipment in modern society. However, papermaking industry causes too much sewage and sludge which brings several pollution to environment. It is a challenge which EHS cause has to always face. Paper making sludge belongs to biological solid wastes which contain organic matters, plant nutrients, ...

  • Treatment of Papermaking Sludge - Model GLOBAL ZJN - J09

    Papermaking sludge dryer is a kind of necessary equipment in modern society. However, papermaking industry causes too much sewage and sludge which brings several pollution to environment. It is a challenge which ZJN cause has to always face. Paper making sludge belongs to biological solid wastes which contain organic matters, plant nutrients, ...

  • Sludge Co-Combustion

    The future and economics of biosolids in agriculture is becoming uncertain. Whilst incineration is viewed in a negative light, sludge co-combustion is seen throughout Europe as a green alternative. With this in mind, DIRK now provides sludge co-combustion in coal-fired power stations. With co-combustion, DIRK provides a complete solution at a ...

    By Dirk European Holdings LTD based in West Kirby, Wirral, UNITED KINGDOM.

  • MERCOX - Mercury Removal System

    Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which ...

    By Babcock & Wilcox Vølund AB based in Gothenburg, SWEDEN. from Flue Gas Cleaning Product line

  • Model BioCo - Sludge Dryer

    Drying sludge has several advantages, including: Sanitization: sludge is dried at over 80°C during more than one hour, removing pathogenic germs (USEPA Class A); Stabilization: biological activity in sludge is stopped by drying; Tonnage reduction: water in sludge is almost completely removed which reduces sludge tonnage to 1/5 - 1/3; Better ...

    By Veolia Water Technologies based in Saint-Maurice, FRANCE.

  • Scrubber Liquid Purification Units

    Scrubber liquid purification for further purification of exhaust flue gases formed in the incineration of sludge in installations Factor series.

    By NPO Dekanter, LLC based in Domodedovo, RUSSIA. from Oil Sludge Utilization Product line

  • Model 1314 - Pre-Method

    Method 1314 is a percolation column test designed to obtain liquid-solid partitioning (LSP) information as a function of liquid-solid ratio (L/S). L/S is represented as the cumulative volume of leaching solution passing through a column containing a known mass of material. For some materials, particle size reduction may be required to meet column ...

    By Remedius, LLC based in Amarillo, TEXAS (USA).

  • Demon - Nitrogen Removal Technology

    The DEMON nitrogen removal technology has been developed by the University of Innsbruck and is world-wide provided by the company DEMON® GmbH and Sweco (The Netherlands, UK and Scandinavia). ELIQUO has designed, constructed and delivered various liquor treatment plants in Europe. Recently ELIQUO has completed the contract for the liquor ...

    By ELIQUO Water & Energy B.V. based in Barneveld, NETHERLANDS.

  • Waste Services

    Sectors of activity; WTCs, Incinerators, Methane fermentation plants,Composting : sludge, green waste, biomass waste, Leaching.

    By WESTRAND Odour Engineering based in Altkirch, FRANCE.

  • Techase - Model TECR Series - Elaspress Advanced Sludge Dewatering System

    To meet the requirements of sludge advanced dewatering, drying and final disposal, realize the goal of sludge reduction and resource, Shanghai Techase Environment Protection Co., Ltd launched Elaspress Advanced Sludge Dewatering System. The system is able to dewater the sludge and reduce its water content to less than 60% of water, which will be ...

  • Berlie - Belt Filter Press

    Berlie Technologies Inc. contracted and delivered, in turnkey projects, a large quantity of belt presses to municipalities, paper mills and other industries in North America and developed a wide expertise working with various sludges in combination with various polymers, belt types and press adjustments.

    By Berlie-Falco Technologies Inc. based in La Prairie, QUEBEC (CANADA).

  • TeamTec - Model GS 1000 - Marine Incinerators

    The GS1000C is the most compact marine incinerator, relative to capacity, on the market today – 1 500 kW.  The model has NOx reducing bilge water injection as standard.

    By TeamTec AS based in Tvedestrand, NORWAY. from Incinerators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you