Only show results available in Massachusetts? Ok

Sludge Pumping equipment for Waste and Recycling

  • Premium

    Landustrie LANDY - Vortex Pumps

    Our LANDY Vortex pumps are renowed for their outstanding non-clogging performance and designed to pump a wide variety of solids and liquids.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Vortex Pumps Product line

  • Grindex - Model (4.1 kW - 4) - Senior Electrical Submersible Sludge Pump

    Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying conditions.

    By Grindex Pumps based in Sundbyberg, SWEDEN. from Senior Electrical Submersible Sludge Pump Product line

  • Grindex - Model (5.6 kW - 3) - Sandy Electrical Submersible Sludge Pump

    Based on the same basic design as the drainage pumps, the sludge pumps come into action when the liquid gets dirtier than can be handled by the drainage pumps. The design even permits converting between drainage and sludge models allowing you to adapt the pump according to the varying conditions.

    By Grindex Pumps based in Sundbyberg, SWEDEN. from Sandy Electrical Submersible Sludge Pump Product line

  • Sub-Prime - Model GSL30/GSL35 - Electric Submersible Sludge Pumps

    The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL30 and GSL35 models are capable of maximum flow rates from 205 to 220 gpm (12.9 to 13.9 l/sec) and discharge heads to 59 feet (18M). Like the dewatering models in the Sub-Prime line, these submersible sludge pumps are suited ...

    By Aquatech Dewatering Company based in Maple, ONTARIO (CANADA). from Electric Submersible Sludge Pumps Product line

  • Horizontal Slurry Pump

    Main Features: Cantilever structure, high speed, in order to obtain a higher head; Pump shell is made of corrosion-resistant high-Cr-Mn alloy material, available for low-concentration slurry transportation, extended working life. Flow:20—40m3/h Lift:30-60m Power:15—37KW

    By Doyen Machinery CO., Ltd based in Foshan City, CHINA. from Horizontal Slurry Pump Product line

  • Ketmak - Turbo Sludge Pumps

    Turbo sludge pumps have 2 or 4 channels and they turn with 1450 rpm at 4-6 atm pressure. At 10-14 atm, they turn with 2900 rpm. These pumps are high pressure pumps that have double stage and rubber-coated. These excellent designed pumps are used for transferring of corrosive liquids that have high viscosity and feeding of filter press.

    By Ket-Mak Aritma Tesisi Imalat ve Paz. Tic. A.S. based in Kocaeli, TURKEY.

  • Model Type SC - Archimedean Screw Sludge Pumps

    Archimedean screw pumps (are designed for handling highly polluted liquids, sludge, etc., of temperature up to 50 °C. They are of a simple, sturdy design and of a high service reliability, long life, simple operation and high efficiency. They are capable of handling liquids with fairly large and even fibrous admixtures, without  the ...

    By GESS-CZ, s.r.o. based in Hranice, CZECH REPUBLIC.

  • High Head Pumps

    The Autoprime range of HH and XH High Head pumps offer excellent performance with solids handling capability and hard wearing materials. The comprehensive range offers a pump for most applications.

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from High Head Pumps Product line

  • Submersible Slurry Pump

    Main features: No blocks, slurry with big particle materials like cloth, fiber etc available to pump. Protection on water, electricity leakage and over-load Very convenient installation and maintenance with double rails coupling device. New material mechanical sealing, makes pump available to running continuously for more than 8000 hours. Flow: ...

    By Doyen Machinery CO., Ltd based in Foshan City, CHINA. from Submersible Slurry Pump Product line

  • Solid and Liquid Seperation System

    Economic and efficient solutions for all filtration problems from 5 liters to 18 m3 cake capacitiesFilterpresses met the industry in early 1900's and started to be used extensively in sludge dewatering (decomposition of solid and liquid). Previously used only labor intensive, this equipment, changed its image as of 1960's and took its place in ...

    By AES aritma based in Istanbul, TURKEY. from Solid and Liquid Seperation System Product line

  • Geyser - Model GIP - Inertia Pump

    Low Cost, Low Energy for Return/Waste Activated Sludge (RAS, WAS) Pumping. The Geyser Inertia Pump has been developed to provide clog free sludge pumping using less energy with easy control of the pumping rate.

    By Geyser Pump Tech, LLC based in Columbus, OHIO (USA).

  • ROTOPUMP - Progressive Cavity Sludge Pump

    The ROTOPUMP is a progressive cavity type pump with a single-shaft, turning eccentrically. It is composed of a rotor and a stator as shown in the following figure. The rotor is made of metal with a circular cross section, while the stator is composed of elastic material with a long circular cross section. The rotor is inside the stator. When the ...

    By Pro-Equipment, Inc. based in Waukesha, WISCONSIN (USA).

  • Sub-Prime - Model GSL60/GSL80 - Electric Submersible Sludge Pumps

    The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL60 model is capable of maximum flow rates from 240 gpm (15.1 l/sec) and discharge heads to 85 feet (25.9M). The GSL80 model is capable of maximum flow rates from 84 to 490 gpm (5.3 to 30.9 l/sec) and discharge heads to 154 ...

    By Aquatech Dewatering Company based in Maple, ONTARIO (CANADA). from Electric Submersible Sludge Pumps Product line

  • D & D - Sludge Pump

    Due to the versatility of the sludge pump, many users prefer it even though the horse power per gallon is greater than the Trash Pump. The additional power requirements and somewhat reduced volume of the Sludge Pump, is more than offset by the extended life of the unit in certain abrasive pumping requirements. The Sludge Pump is ideal for pumping ...

    By D&D Machine & Hydraulics, Inc. based in Fort Myers, FLORIDA (USA).

  • Sludge Pumps

    We offer our customers also other necessary equipment such as sludge pumps to complement Dinworks product portfolio. Sludge pumps are used for pumping the sludge to the dewatering belt filter press. These peripheral equipment are always sized to fit customer's demands for sludge dewatering solution. We offer progressing cavity pumps in several ...

    By Dinworks OY based in Helsinki, FINLAND. from Sludge Pumps Product line

  • Medium Head Open Set Pumps

    The Autoprime range of AC, L, PM and PE general purpose pumps offer the advantage of the lower cost package but with the opportunity to pick and choose the level of technology that is required.

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from Medium Head Open Set Pumps Product line

  • Q-Series Pump Range

    The award winning Q-Series range offers numerous benefits, these being adopted into other products. The Q-Series offers a differentiated solution with proven latest technology providing an environmentally friendly package such as with full liquid containment, excellent fuel savings and sound attenuated canopies. Operating benefits include ...

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from Q-Series Pump Range Product line

  • Sludge Pump

    The Allegro Sludge Pump is excellent for pumping standing water containing sand, solids, leaves,or debris. This Allegro pump can pump at a maximum of 50 gallons per minute. Features double inside mechanical seals with silicon carbide faces and the most durable seal design available; a 403 stainless steel sleeve. The motor is continuously filled ...

    By Enviro Safety Products based in Visalia, CALIFORNIA (USA). from Sludge Pump Product line

  • Grindex - Model (0.82 kW - 2) - Solid Electrical Submersible Sludge Pump

    The Solid pump excels in applications where reliability and easy handling are essential. Like its drainage equivalents, Mini, it is built to handle contaminated water, pH 5-8, and water containing relatively abrasive solids up to the size of 38 mm.

    By Grindex Pumps based in Sundbyberg, SWEDEN. from Solid Electrical Submersible Sludge Pump Product line

  • SPP - Model Autoprime AC75 - Open Set Pump

    The SPP AUTOPRIME AC75 is a 3' (75mm) diesel driven pump unit. Its compact size allows for easy on-site maneuverability and handling, while the design gives the ability to pump liquids containing sand, sewage and small semi solids.Typical uses for the AC75 are removal of ground and rain water from excavations, trenches, footings, manholes and ...

    By Maris Pumps Ltd based in Chesterfield, UNITED KINGDOM. from Open Set Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you