Only show results in Texas? Ok

industrial sludge pumping (Sludge Pumping) equipment

  • Premium

    Bi-On - Model TB ODR - Filtration Media

    This triple blend is an ideal product to use in waste water treatment plants due to the high H2S absorption capacity. It is also highly effective with other common malodorous compounds such as methyl mercaptan and wide spectrum of VOCs. It is specially recommended for ambient with high moisture contents due to its optimal mechanical properties. ...

    By Bioconservacion SA based in Barcelona, SPAIN. from Bi-On Filtration Media Product line

  • Model AVC/EOD/DOD - On-Site Dewatering Unit

    Realising that the average sludge contained a high percentage of water, which was needlessly being transported for disposal at the local waste water Treatment works, Simon Moos decided to develop an on-site system that would take the treatment works to the sludge and the AVC & DOD/EOD where born. The principle behind the MOOS AVC/EOD/DOD ...

    By Simon Moos Maskinfabrik A/S based in Sønderborg, DENMARK.

  • Flygt - Model 2630 - Sludge Pump

    The Flygt Sludge 2630 pump is designed for reliability with innovations that reduce wear on the impeller and seal. With Flygt, you’ve got a pump that just keeps pumping, no matter what and in even the harshest conditions.

    By Xylem, Inc. based in Rye Brook, NEW YORK (USA). from Xylem’s Flygt Pumps Product line

  • Flygt - Model DS 2730 - Electric-Submersible Corrosion-Resistant Sludge Pump

    Flygt DS 2730 is a electric-submersible, corrosion-resistant sludge pump, built to withstand the toughest job sites with corrosive and/or abrasive liquids found in mines, industrial sites and public utility applications. The Flygt 2700 series of sludge pumps handle flows over 1,800 USGPM (50 l/s), heads to 200 ft ...

    By Xylem, Inc. based in Rye Brook, NEW YORK (USA). from Xylem’s Flygt Pumps Product line

  • Double Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Diaphragm Pumps Product line

  • Sludge Pro - Model 3SDWP - Disc Pump

    Sludge Pro© disc pumps are designed fa a wide range of slurry and sludge process applications for the municipal, industrial, chemical and food processing industries These durable leak-free pumps are self priming and can run dry without damage fa uncompranising pumping reliability Select from standard direct drive, belt driven, air, hydraulic ...

    By Wastecorp Pumps based in Grand Island, NEW YORK (USA). from Disc Pumps Product line

  • V-RAM Solids - Sludge pump

    Piston pump handles 'cake type' material at high pressures with unique industry 'free floating' urethane ball check valves and seats for high reliability and long life (excess of 30,000 operating hours without valve change.Agricultural waste processing, rendering operations and MSW (Municipal Solid Waste).Long distanace pipeline pumping with high ...

    By Gerber Pumps International, Inc. based in Longwood, FLORIDA (USA).

  • Model GFHU - Submersible Sludge Pumps

    The submersible sludge GFHU pumps are special pumps used especially for pumping of waste water, raw sludge, fecal solids with content of non-abrasive, solid and small particles and fibrous substances such as paper, rag pulp, food residuals or even small portion of sand, ashes, grit and other substances coming into sewage conduits. These pumps are ...

    By DOOS s.r.o. based in Náměšť na Hané, CZECH REPUBLIC. from Flood Protection Pumps Product line

  • Sewage Pumps

    SU Submersible Sewage Pumps are of close coupled construction comprising of a single stage centrifugal pump with a non type impeller and high torque squirrel cage induction motor. They are specially designed for drainage of effluents and all types sludge with up to 10% solids content. These pumps are primarily used for pumping sewage, digested ...

    By Su Motors Pvt. Ltd. based in Mulund (W), INDIA.

  • Single Diaphragm Pump

    Diaphragm pumps are ideally suited for all sectors of the construction industry as well as for municipal and industrial applications where dry priming pumps are required. They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids. One of the best features of the diaphragm pumps is that they can run ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Diaphragm Pumps Product line

  • Model AGM - Lobe Rotor Sludge and Bilge Pump

    Since the introduction to the marine industry more than 15 years agro, the AGM lobe rotor pump has been chosen by an increasing number of shipyards and shipping companies worldwide.

    By Agrometer a/s based in Grindsted, DENMARK. from Maritime Industry Product line

  • Model LSM-65 - Hose Pump

    The LSM-65 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, clay, and food in large quantities. The pump is also used in the agriculture industry.

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Model LSM-100 - Hose Pump

    The LSM-100 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, and food in large quantities. The pump is largely used in the agriculture-, biogas-, mine-, and fishing industry, since the pump can manage larger particles.

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Zenit - Model SBP - Dual-Channel Closed Impeller for Submersible Pump

    Suitable for heavy-duty industrial applications, they are generally used in civil and industrial wastewater treatment plants, for lifting sewage, for pumping industrial sludges and rainwater containing solids, and for recycling raw or activated sludges and biological liquids. General features: Deliveries DN 80 ÷ DN 250. Motor poles 2 / 4 / ...

    By Zenit Europe S.A. based in Bascharage, LUXEMBOURG. from Submersible Electric Pumps - Dual-Channel Closed Impeller Product line

  • Model LSM-125 - Hose Pump

    The LSM-125 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, and food in large quantities. The pump is largely used in the agriculture-, biogas-, mine-, and fishing industry, since the pump can manage larger particles.

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Model LSM-80 - Hose Pump

    The LSM-80 is our most popular model. The LSM-80 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, and food in large quantities. The pump is largely used in the agriculture-, mine-, and oil industry, since the pump can manage larger particles.

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • VAUGHAN – Centrifugal Chopper Pumps

    Quality manufactured in Montesano, USA by Vaughan Company, Inc., Vaughan chopper pumps are heavy-duty centrifugal pumps with the unique ability of chopping all incoming solids prior to pumping. They will chop and pump difficult solids laden wastewater and sludge that conventional cutter and grinder pumps cannot handle. These robust pumps will ...

    By Pump Systems Ltd based in Christchurch, NEW ZEALAND.

  • Progressive Cavity Pumps

    Applications : Wastewater . Sludge . Food & Beverage . Oil Industry . Paper Industry . Pharmaceuticals

    By Avonmore Electrical Co. Ltd based in Mallow, IRELAND. from Wastewater- Pumps Product line

  • Zenit - Model SMN - Single-Channel Closed Impeller for Submersible Pump

    Designed for heavy-duty applications, they are generally used in civil and industrial wastewater treatment plants, for lifting in sewer systems and for pumping industrial sludges. Transporting rainwater containing solids and recycling raw or activated sludges and biological liquids. This series is prefitted for installation of the ZENIT cooling ...

    By Zenit Europe S.A. based in Bascharage, LUXEMBOURG. from Submersible Electric Pumps - Single-Channel Closed Impeller Product line

  • Zenit - Model SBN - Dual-Channel Closed Impeller for Submersible Pump

    Designed for heavy-duty professional applications, they are used in civil and industrial wastewater treatment plants. Lifting sewage, pumping industrial sludges and rainwater containing solids, and recycling raw or activated sludges and biological liquids. This series is prefitted for installation of the ZENIT cooling system for dry or ...

    By Zenit Europe S.A. based in Bascharage, LUXEMBOURG. from Submersible Electric Pumps - Dual-Channel Closed Impeller Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you