Only show results in Connecticut? Ok

Sludge Pumping equipment for Waste and Recycling

  • Model LSM-15 - Hose Pump

    The LSM-15 hose pump is suitable for dispensing of chemicals and process management in small quantities. The pump can manage everything from sludge, glue, acids, corrosive materials, alcohol, and food. As a standard, the pump case is made from polyurethane, embedded with parts that make it stronger. Since this pump is produced in polyurethane, it ...

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Model LSM-25 - Hose Pump

    The LSM-25 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, and food. As a standard, the pump is made from steel, and hereafter powder painted in black. The legs of the pump is made from stainless steel. The pump can also be made from stainless steel, should this be a demand. ...

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Buwa - Model WSWBVC - Storage Tank

    The WSWBVC storage tank is Buwatec’s heavy duty storage system. It has a very high tensile strength (S280) according DIN – EN 101147 and a minimal panel thickness of 1,2 mm, which makes the silo robust and suitable for industrial applications. The corrugated steel plates of the silo are always galvanized on both sides, and in ...

    By Buwatec B.V. based in Almkerk, NETHERLANDS. from Buwa Tank Product line

  • GN - Model GNSP - Sludge vacuum pump used for transfering the drilling cutting and mud

    Sludge vacuum pump, also named as solids transfer pump. It is a type of pneumatic pump that sucks the material with vacuum produced by air operation, and then converts to positive pressure for discharging. Most of the solids, sludge and liquid could be transferred by using this pump. With special structure design of no rotating parts in the ...

  • MXQ Bornemann - Model ER - Open Hopper Pumps

    If you have a requirement of handling heavy, or extremely viscous fluids, then the ER open hopper pumps are an ideal match. As their name suggests, these pumps feature open hopper and screw feeder. These pumps have a capacity up to 250 m³/h, and a differential pressure up to 80 bar. They are used in a wide range of industries, owing to their ...

    By MXQ, LLC based in Houston, TEXAS (USA). from Progressive Cavity Pumps - Bornemann Equivalent Pumps Product line

  • Model LSM-40 - Hose Pump

    The LSM-40 hose pump is suitable for pumping of thicker fluids. The pump can manage everything from sludge, glue, acids, concrete, and food in large quantities.

    By LSM Pumper ApS based in Vrå, DENMARK. from LSM - Hose Pump Product line

  • Dan Pumps - Model S-WS20 and -WS30 - Sludge Pumps

    The DanPumps S-WS20 and -WS30 is a high-efficient lightweight sludge pump built in aluminium, which ensure easy handling and installation. The DanPumps S-WS20 and -WS30 is suitable for pumping sludge and water mixed with solids, and is the ideal choice for plug-in operations and is ready for use when delivered on site.

    By DanPumps A/S based in Kolding, DENMARK.

  • Model OMF - Filter Presses for Marble or Granite

    Filterpresses for marble or granite production are designed to run automatically without an operator and they take about 10-15 minutes to complete a full pressing cycle. They consist of a fully heat galvanized top beamed structure and the filter plates are assembled only in the top central area. This system enables plate oscillation during the ...

    By OMEC s.r.l. based in Chiampo (VI), ITALY. from Filter Presses Product line

  • Model OMF - Aggregates Treatment Filter Presses

    Filterpresses for the treatment of aggregates are designed to run automatically without an operator and they take about 20-60 minutes to complete a full pressing cycle, depending on the physical-chemical nature of the treated material. They consist of a fully heat galvanized top beamed structure and the filter plates are assembled only in the top ...

    By OMEC s.r.l. based in Chiampo (VI), ITALY. from Filter Presses Product line

  • Landia - AirJet Aerators

    Landia AirJet is a so-called air ejector where the air, and thus the oxygen, is automatically sucked into the ejector and then mixed with the wastewater from which it is pumped, under pressure, into the tank.

    By Landia a/s based in Lem st., DENMARK.

  • Discflo - Model ANSI - Disc Pumps

    Discflo’s ANSI Pump has been employed in the following applications: slurry gel, polymer emulsions, produced water, chemical slurry, liquid tetrahydrafuran, pulp, seawater with cuttings, teflon dispersions, acetone solution and wastewater sludge. Discflo’s ANSI Disc Pump offers unique productivity and cost-saving benefits for users in ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • Model PM - Airlift Pumps

    Airlift pumps type PM (PM 1”, PM 1 ½”, PM 2” and PM 110) are designed for pumping different kind of media. They are particularly useful during wastewater treatment, recirculation of activated sludge, pumping raw wastewater and removing sand from sand traps.

    By AEC ApS based in Copenhagen, DENMARK. from Diffusers Product line

  • Met-Chem - Model 1 to 5 Cu. Ft. - 470mm Filter Press

    Air operated diaphragm pumps are used with filter presses to pump sludge from the bottom of the sludge holding tank into the filter press.  These pumps are ideal because they can handle the slurry which is generally about the consistency of a milkshake.

    By Met-Chem, Inc based in Cleveland, OHIO (USA). from Filter Press Product line

  • Met-Chem - Model 2 to 10 Cu. Ft. - 630mm Filter Press

    Air operated diaphragm pumps are used with filter presses to pump sludge from the bottom of the sludge holding tank into the filter press.  These pumps are ideal because they can handle the slurry which is generally about the consistency of a milkshake.

    By Met-Chem, Inc based in Cleveland, OHIO (USA). from Filter Press Product line

  • Aquapoint - Model ANOX - BDR & MBDR - Biological Denitrification

    The Aquapoint ANOX-MBDR provides a suitable environment to initiate and complete biological denitrification. Biological denitrification is the reduction of nitrate to nitrogen gas by facultative heterotrophic bacteria in the presence of a soluble carbon source.

    By Aquapoint based in New Bedford, MASSACHUSETTS (USA).

  • City Filter Press - Mono Pump

    City Filter Press always pays the best attention to find the best sludge pump solution for its customers complex needs. Especially in food and pharmaceutical industries, stainless steel monopumps are suitable to transfer mellow liquids into the filter press with hygenic pump line. Also the ability to use electrical invertors, monopumps' flow ...

    By City Filter Press (CFP) based in Başakşehir, TURKEY. from Filter Press Pumps Product line

  • Vandezande - Grit and Scum Remover

    In a water treatment plant the grit and scum remover separates grit (and oil and grease) from the contaminated medium. There are 2 different types of grit and scum removers: the circular grit and scum remover and the rectangular grit and scum remover. The feeding of the medium in the circular grit and scum remover basin is carried out via a supply ...

    By Vandezande bvba based in Diksmuide, BELGIUM.

  • Akar WEt Sludge Handling (AWESH) System

    This is a novel concept introduced for the first time in Northern India by Akar. The system involves handling of sludge without human hand contact. Normally sludge after being dewatered is packed in bags and transported to another site for further drying. However, the sludge from Filter Press is semi dry or rather semi wet. Handling this in bags ...

    By AKAR IMPEX PVT. LTD. based in Noida, INDIA.

  • VAUGHAN – Centrifugal Chopper Pumps

    Quality manufactured in Montesano, USA by Vaughan Company, Inc., Vaughan chopper pumps are heavy-duty centrifugal pumps with the unique ability of chopping all incoming solids prior to pumping. They will chop and pump difficult solids laden wastewater and sludge that conventional cutter and grinder pumps cannot handle. These robust pumps will ...

    By Pump Systems Ltd based in Christchurch, NEW ZEALAND.

  • SHAC - Shactivate - 10 Litres, 205 Litres

    Reduces odors, gases and sludge, providing a safer and more pleasant environment for communities, lagoons, collection and storage facilities. Reduces organic sludge saving time and money on pumping and dredging; increases volume retention and storage capabilities. Reduces contaminants and nutrients resulting in a healthier system for microbes and ...

    By SHAC Solutions Inc. based in Redcliff, ALBERTA (CANADA). from Commercial Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you