Sludge Storage Equipment For Waste And Recycling Available In Australia
-
PremiumManufactured by BioMicrobics, Incbased in USA
MyFAST is a larger FAST system that is engineered for the needs of onsite wastewater treatment with flows in the 10,000 to 160,000 GPD. This advanced wastewater treatment system uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
SKS SKS lamella clarifiers are compact, ready-to-connect units for the separation of solids from liquids. They work according to the tried-and-tested counter-flow principle. Thanks to our TUBEdek lamella packs, the removal efficiency of the SKS separators is extremely high. The individual SKS lamella clarifiers modules with sedimentation surfaces from 18 m2 to 33 m2 can easily be connected in ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
MacroFITT is a scaled-up version of the FAST process that is engineered for the needs of community wastewater with flows in the 200,000 GPD – 2 million GPD range. This system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in ...
-
Manufactured by KSB Groupbased in GERMANY
KSB’s Amamix submersible mixer is powerful yet economical in waste water treatment processes. High reliability is achieved by the industry leading leakage protection at the shaft and cable ...
-
Manufactured by Jiangsu Kintep Environmental Protection Co., Ltd.based in CHINA
KSAC serial products are suitable for organic sludge with high water content.Sludge is displayed on the belt type conveyor without stirring in order to dry the surface of sludge mass quickly.It is adjustable the belt conveyor speed by motor frequency in order to avoid sludge mass reform and get final dryness.The KSAC series flow diagram is shown as ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
The Enviromulti storage and extraction silo is designed for difficult products such as sewage sludge. Enviromulti extractors consisting of several screws form a moving bed at the bottom of the tank. Thanks to the rotational movement, but also by the variation of the pitches and directions of rotation given to each of the screws, the sludge collapses in the threads and is directed towards the ...
-
Manufactured by Vaughan Company., Inc.based in USA
Vaughan's Rotamix system is the world's most reliable cost effective means of mechanical hydraulic mixing for sludge tanks, digesters and other high-volume ...
-
Manufactured by Canadian Crystallinebased in INDIA
The Anoxic Tank receives flow from the equalization tank, either by gravity or by pumping. Anoxic tank consists of an Agitator / Mixer for constant churning of the mixed effluent. At the same time, bacteria nitrifies the ammonia to nitrogen contained in the ...
-
Manufactured by Caprari S.p.A.based in ITALY
Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version - AISI 316. Galvanic separation system for standard components providing effective protection against ...
-
Manufactured by Skyhawk Global Ltdbased in UNITED KINGDOM
TankEater is a bioremediation product that was designed specifically to break down hydrocarbon sludge in Storage Tanks, Vessels and Separator pits. TankEater not only breaks down the hydrocarbon sludge but activates the natural bacteria in the specific area to accelerate the sludge reduction process, returning essential storage capacity to the operator. TankEater consists of various bacterial ...
-
Manufactured by Clean Water Technology, Inc.based in USA
The DSP (Dewatering Screw Press) is a powerful wastewater treatment system able to treat many types of industrial wastewater or sludge in one single operational ...
-
Manufactured by System S&P GmbHbased in GERMANY
After the main biological stage (RBC), System S&P often uses Lammella separators for post-sedimentation. These have proven to be cost-effective and their special design enables an extremely compact construction. System S&P GmbH lamella separators are specially adapted to RBC technology. The excess sludge from fixed-bed systems is highly compact and settles faster than sludge from classic ...
-
Manufactured by Burnham Environmental Services Ltd (BES)based in UNITED KINGDOM
The Biodigester Standard Range is a bespoke system for the treatment of sewage / waste water for populations or Population Equivalent (PE) up to 2000 or higher using a suitable primary settlement tank or tanks followed by Biodigester Bonus waste water treatment units in ...
-
Manufactured by Hidrostal Holding AGbased in SWITZERLAND
HidroMix, the original solution for tank mixing systems. The Original Solution for Tank Mixing Systems. HidroMix pump mixing system for sludge tanks and digesters, provides a more efficient, safe and economic is a practical alternative to conventional submersible and gas mixers. The key objective with any form of sludge storage is to avoid the build-up and settlement of any wastewater solids ...
-
Manufactured by Sodimatebased in FRANCE
When the sludge is dehydrated by a belt filter press, decanter or filter press, it might be necessary to use lime and convey it to storage (bin, area, silo, etc.). Sodimate, in addition to its quicklime discharge and metering installations and the twin-shaft mixer MBV, designs sludge handling and conveying systems by shaftless screw conveyors in order to be able to supply a complete ...
-
Manufactured by LIPP GmbHbased in GERMANY
Made from Verinox stainless steel or galvanised steel with volumes ranging from 40 m3 to 10,000 m3. Both industry and communities require professional solutions for plant and tank construction and for the storage and treatment of liquids, as well as flexibility in terms of size, choice of material and equipment. When constructing liquid storage tanks, the selection of the best material is an ...
-
Manufactured by Adiss S.A.based in ROMANIA
The ADIPUR compact wastewater treatment plant is one main product of our company. ADIPUR is intended for advanced treatment (it also reduces nitrogen and phosphorus) of the urban wastewater and of the domestic wastewater in urban areas with an aproximate number of 6.000 equivalent inhabitants. In particular cases these plants can expand to treating urban wastewater for up to 12.000 ...
-
Manufactured by FluidMixbased in SPAIN
Submersible mixers are used in pumping stations to avoid or shake depositions of solids, as well as to avoid superficial films at wastewater treatment plants. Another application of the agitators is the homogenization of deposits in small treatment plants or small reaction tanks. Submersible agitators with direct drive (TBM) are used in water of storm tanks, sludge storage tanks, holding tanks in ...
-
Manufactured by Remosa - Recubrimientos y Moldeados s.a.based in SPAIN
The sludge accumulated in the secondary decanter of treatment plants should be periodically purged towards a sludge storage silo. From this storage silo the sludge is evacuated for subsequent treatment. Installing a sludge storage silo as a complement to the treatment plant reduces the latter’s running ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you