Solvent-Based Cleaning Equipment For Waste And Recycling Available In Arizona
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecWeld 0-2000ppm O2 Analyzer is designed to provide distinct accurate measurements of oxygen content in welding and industrial ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The Amafilter® amaCera ceramic PC filter cartridge is specially designed for the polishing filtration of liquid sulphur. Porous ceramic filters are used for solid particulate removal in liquid and gas applications. These rugged porous ceramic cartridges are manufactured by fusing aluminium oxide grains using a porcelain bond to form a strong, uniformly porous and homogeneous ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The AM series was specially developed for for the medium performance segment in plant and apparatus engineering. High-quality housing and bearing materials enable adaptation to almost any conveying task as required. * Drive is via a magnetic coupling * Examples of applications: Acids, alkalis, acid and alkali mixtures, solvents, alkaline degreasing baths, electroplating baths, photographic ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The TMB series was specially developed for installation in small systems and apparatus. The single-stage Centrifugal pump offers robust technology in the smallest space. * Drive is via a magnetic coupling * Typical applications: Acids, alkalis, acid and alkali mixtures, solvents, alkaline degreasing baths, electroplating baths, photographic chemicals Features & Advantages * Variable connection ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Handheld 0-5% Oxygen Sensor is designed to provide accurate measurements of oxygen content in all closed and pierce-able food packaging, infusion containers or ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
New ASTM D8092 Standard Supports Direct Kinematic Viscosity Measurement. MiniVisc 3000 Series is a temperature controlled, portable kinematic viscometer. The MiniVisc 3000 series (formerly the SpectroVisc Q3000 Series) viscometers are the first truly portable, solvent-free, temperature-controlled kinematic viscometers, providing high-accuracy measurements for easy detection of viscosity ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Oxygen (O2) and Carbon Dioxide (CO2) Weld Purge Analyzer is designed to provide accurate measurements down to 0% oxygen and up to 100% carbon dioxide when back purging with argon and CO2 gas mix during welding. ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Cutting and Tapping Fluid. Clear, synthetic coolant and lubricant designed to disperse heat and extend tool life. Convenient aerosol is handy for field operations. Works on exotic metals. Non irritating to the skin. Transparent fluid provides clear view of work area. Includes extension tubes for easier application to remote ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
The DEGA NSx-yL III gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
-
Manufactured by Cuda USAbased in USA
A robust starter machine. Cuda’s 2412 series of parts washers is an attractive entry-level top-load aqueous parts washer. At only 35 inches wide, the Cuda 2412 Series parts washer has a 250-lb. load capacity, and a 24 inch turntable diameter. While boasting Cuda Series durability, it has a 1/2 HP mechanical seal with flush tube style pump and an upper drive arm that rotates the turntable. ...
-
Manufactured by SAT Groupbased in ITALY
Use ordinary tap water, alcohol, solvent cleaning. High power transducer cleaning effect significantly, usable macroscopic observation. After cleaning objects shine light. Mechanical timing control boot time. The stainless steel and the lid, bladder, more upscale. Waterproof properties is greatly improved, more safety products last. With constant temperature system with ...
-
Manufactured by NexGen Enviro Systems, Inc.based in USA
Plastic Bin Washing Machines For More Efficient, Economic Cleaning. A container cleaning machine will help alleviate cost, labor, and time requirements. Any company that uses plastic bins that must be washed or disposed of can benefit from in-house container washing capabilities. A container cleaning machines will thoroughly clean plastic bins and other vessels used by manufacturers and ...
-
Manufactured by Patholab Srlbased in ITALY
HISTOPROCESS 300 is an automated processor for histological tissues specimen that works continuously or ...
-
Manufactured by 4SProductsbased in USA
Lightweight outdoor fiber optic cable designed for aerial (lashed) and duct ...
-
Manufactured by Crest Ultrasonics Corporationbased in USA
The Solvac S2 offers the Solvac line’s most premium features: Reduced operator labor, cycle times, and overall running costs, with automatic low-line transfer, using an internal lifter that keeps the lid closed and sealed throughout the process. And highly efficient component drying with maximum solvent distillation, with twin refrigeration units (dedicated primary and secondary cooling) to ...
-
Manufactured by International Surface Technologies (IST)based in CANADA
This continuous solvent recycler is an evaporative distillation process unit. The waste solvent automatically enters the distillation vessel utilizing the standard vacuum pump provided with the solvent recovery ...
-
Manufactured by YASUDA SEIKI SEISAKUSHO, LTD.based in JAPAN
This tester is used to measure the melt flow index of thermo-plastic. The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die. The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The new fiber-optic temperature sensors from PyroScience are based on an innovative technology utilizing temperature-sensing properties of luminescent indicators. The needle-type temperature minisensors feature unprecedented fast response times in liquids (down to ...
-
Manufactured by Environmental Manufacturing Solutions (EMS)based in USA
Fusion is a revolutionary anti-stick chemical designed specifically for the ready mix market to help eliminate the need for costly and dangerous drum chipping. After a 15 minute application process, Fusion bonds with the metal or poly-composite drum to create a surface impenetrable by water for up to 3 months of regular operations. The result is a surface that concrete cannot adhere to for up to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you