Solvent-Based Cleaning Services For Waste And Recycling Available In Papua New Guinea
-
PremiumManufactured by atech innovations gmbhbased in GERMANY
atech innovations offers ceramic membranes for produced water treatment to customers all over the globe. Our superior quality is obtained through a production process without ceramic binders or other additives. The ceramic membrane supports are made of high purity alpha-aluminum oxide for maximum ...
-
by QROS Ltdbased in UNITED KINGDOM
QROS can provide several techniques for analysing heavy metals on site. XRF; The most common method is X-ray Fluorescence (XRF). XRF has a very good correlation with high quality laboratory results. TheSciAps X-505 XRF from QROS can also detect the lighter elements such as Ca, Mg, Al, Sulphur and Chlorine, which can be useful for Sulphate estimations. For the toxic heavy metals, the detection ...
-
Manufactured by CMC Klebetechnik GmbHbased in GERMANY
Protecting surfaces against soiling or graffiti with a protective cover is standard procedure. The lotus effect of, for example, protective paints is one way to facilitate the cleaning of soiled areas. Another is the pasting with sacrificial surfaces, so multi-layered films that can be gradually removed from the loaded areas. The cleaning of building walls, facilities in the public street or on ...
-
Manufactured by ITEX, Inc.based in USA
The dry cleaning procedure must be done in a manner that removes all dry cleaning solvents from the fabric. Do not dry clean Indigo dyed BANOX FR3 , BANOX CERTIFIED or BANWEAR denim ...
-
Manufactured by Green Earth Technologies, Inc.based in USA
Oil field equipment such as 'work-over rigs', coiled tubing units, wire-line units, pumping units and even hand tools become fouled with use. All this industrial equipment must be cleaned periodically for proper operation, to avoid maintenance issues, to perform maintenance when required; and, in some cases, for aesthetic purposes. Traditional means of cleaning include caustic cleaners, solvents ...
-
based in USA
Many air quality permitting projects require a facility-wide inventory of all air emissions sources. An accurate accounting of emissions is also necessary for payment of annual permit fees to state and local regulatory agencies. In addition to common point sources, facilities often have emissions sources that are more difficult to identify and quantify, such as raw material storage piles, ...
-
based in CANADA
Mobilizing contaminants for efficient extraction. Cosolvent flushing involves injecting a solvent mixture, such as water with alcohol, into an aquifer impacted with Non-Aqueous Phase Liquids (NAPLs) to solubilize and increase the mobility of the compounds. The solvent and the solubilized NAPL are then removed through extraction wells, and either treated on-site or disposed of off-site. The ...
-
based in CANADA
Mobilizing contaminants for efficient mobilization and extraction. Surfactant flushing involves injecting a surfactant mixture into an aquifer impacted with Non-Aqueous Phase Liquids (NAPLs) to mobilize them. The surfactant and the mobilized NAPL are then removed through extraction wells, and either treated on-site or disposed of off-site. The surfactant mixture is typically injected up-gradient ...
-
based in AUSTRALIA
The EPA’s vision is to work towards a clean, healthy and valued environment that supports social and economic wellbeing for all South Australians now and into the future. Site remediation can generate both public and private benefits, by releasing previously contaminated land and allowing urban regeneration. In the United States, studies indicate that this has resulted in significant ...
-
Manufactured by Ophir Optronics Solutions Ltd.based in ISRAEL
General Precautions: Although the external side of the lens is coated with a durable / erosion resistant coating (according to MIL standards), cleaning dust, sand and other particles might scratch the coating and eventually degrade the performance of the lens. Do not use tools or sharp objects when cleaning the ...
-
based in USA
WESTON has performed a number of demolition and decommissioning projects for our clients over the past 45 years. These projects have included field surveys, sampling and analysis, dismantling/demolition designs, construction demolition phasing, recycle/reuse studies, and transportation and disposal cost ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you