solvent collection Articles

  • Recycling Solvents in Histology Department of Hospitals

    Industrial rotary evaporator: eco-friendly and cost-saving Solvents (ethanol, xylene and water) are used in histology for dewatering and destaining during the preparation of tissue sections. Here we show how these solvents are recycled in an automated process using an industrial rotary evaporator. We offer safe and efficient industrial distillation by intuitive ...


    By BÜCHI Labortechnik AG

  • Chlorinated solvents: methylene chloride and TCE

    Introduction This paper presents the results of a scaled and phased approach to source remediation of high concentrations of recalcitrant chlorinated solvent compounds via soil vapor extraction (SVE) and vapor treatment at a Site in Southern California. Phase I began with refrigerated condensation (C3) in order to achieve high mass removal rates to reduce lifecycle costs and time ...

  • Bioaugmentation to Treat Chlorinated Solvents in Fractured Bedrock

    ABSTRACT: An in situ bioremediation pilot study was performed at a former industrial site in New Jersey where groundwater has been impacted by historical releases of chlorinated solvents. The target area for treatment is a fractured, intermediate bedrock zone. The remedial objective at the Site is to treat the groundwater while minimizing the impact of the remedial system on the re-development of ...


    By EOS Remediation, LLC

  • Principles and practices of enhanced anaerobic bioremediation of chlorinated solvents

    PROBLEM STATEMENTThe Department of Defense (DoD) has identified hundreds of sites where groundwater is contaminated with chlorinated solvents; these represent one of the DoD’s largest remediation liabilities. In addition to their use in many industrial processes, chlorinated solvents have historically been used for cleaning and degreasing such diverse products as aircraft engines, automobile ...


    By RNAS Remediation Products

  • Reduction in Solvents for Cleaning: Amcor Packaging (Australia)

    Background Amcor Cartons, a manufacturer of folding cartons and paperboard packaging is a 13 million dollar operation employing 60 staff. In keeping with Amcor Cartons’s commitment to respond to customer needs through the application of the highest technology, advantage was taken of the latest available technology when deciding to upgrade their printing press. After installing a new ...


  • Solvent choices for infrared testing of oil and grease in water

    Water is a very strong absorber in the mi d infrared (I R) regio n where o il is measured. We see the effect of infrared absorbance when a cold bucket of water left in the sun is quite warm by afternoon due to the absorption of infrared energy as heat. When measuring part per million (ppm) oil levels with mid IR, the water absorbs so much of the infrared energy that the signal becomes saturated ...


    By Spectro Scientific

  • Passively Enhanced In-Situ Biodegradation of Chlorinated Solvents

    Harding Lawson Associates (HLA) conducted a field demonstration to evaluate in situ enhanced anaerobic biodegradation of chlorinated solvents using Hydrogen Release Compound (HRC). The technology is designed to enhance the natural biodegradation process for a more rapid and complete degradation of the organic contaminants to non-toxic compounds (e.g., ethylene). This paper presents the results ...


    By REGENESIS

  • Technical protocol for evaluating natural attenuation of chlorinated solvents in ground water

    The U.S. Environmental Protection Agency is charged by Congress with protecting the Nation’s land, air, and water resources. Under a mandate of national environmental laws, the Agency strives to formulate and implement actions leading to a compatible balance between human activities and the ability of natural systems to support and nurture life. To meet these mandates, EPA’s research ...


    By RNAS Remediation Products

  • Indirectly suspended droplet microextraction of water‐miscible organic solvents by salting‐out effect for the determination of polycyclic aromatic hydrocarbons

    A simple and low cost method “indirectly suspended droplet microextraction of water‐miscible organic solvents (ISDME)” by salting‐out effect prior to high performance liquid chromatography and UV detection (HPLC‐UV) was used for the determination of polycyclic aromatic hydrocarbons (PAHs) in different samples. ISDME is a combination of salting‐out extraction of water‐miscible organic solvent ...


    By John Wiley & Sons, Ltd.

  • Multiyear Temporal Changes in Chlorinated Solvent Concentrations at 23 Monitored Natural Attenuation Sites

    Introduction There is an increasing interest in predicting how long it will take natural attenuation processes to remediate groundwater plumes. The U.S Environmental Protection Agency (USEPA) Monitored Natural Attenuation (MNA) Directive (USEPA 1999) specifies that MNA relies on “ . . . a variety of physical, chemical, or biological processes that, under favorable conditions, act without human ...


  • Measurement of selected polychlorinated biphenyls (PCBs) in water via ultrasound assisted emulsification–microextraction (USAEME) using low-density organic solvents

    Despite bans and restrictions for their adverse health effects including endocrine disruption, due to their stability in the environment, polychlorinated biphenyls (PCBs) are still of concern for their residues in several matrices. This study employed low-density ultrasound-assisted emulsification–microextraction (USAEME) to measure selected PCBs (28, 52, 101, 118, 138, 153, and 180) in water ...


    By IWA Publishing

  • Progress Soil Sampling Results Collected from Phase 1 at SRSNE Superfund Site in Southington, Connecticut

    TerraTherm has recently completed its final progress soil sampling effort of Phase 1 at the Solvents Recovery Service of New England, Inc. (SRSNE) Superfund site in Southington, Connecticut. The site's total target treatment zone covers an area of approximately 74,195 square feet and an approximate volume of 47,298 cubic yards; with Phase 1 and Phase 2 each comprising approximately half the ...


    By TerraTherm, Inc.

  • Analysis of Automotive Polymers - Case Study

    The above criteria are important to the professional scientist or laboratory chemist. Introduction Polymers are present in daily life. From the wrappings around the food we eat to the sacks used for the garbage, polymers are practically everywhere. The automobile is no exception. Polymers comprise greater than 40% of a modern automobile; the carpet, seats, padding, knobs, ...


    By Specac Limited

  • Removal of VOCs from Spent Aerosol Cans.

    There are over three billion aerosol cans manufactured in the U.S. annually, 60% of which are consumed by households. Many of the products contained in these cans, such as paint products, light lubricants, starting fluids, polishes and waxes, and cleaners, contain substantial amounts of volatile organic compounds (VOCs) as solvents and include flammable propellants. As a result, partially empty ...


  • Waste Water Elimination: Parr Paints

    Parr Paints solved its waste water problem by optimising cleaning processes and reusing the collected wash water in the next batch of product. The purchase cost ($800) of an off the shelf high pressure wash unit was more than offset by the $3000 pa savings in waste disposal and improved labour efficiency. Background Parr Paints Pty Ltd (Parr Paints) is a small family owned ...


  • Removal of VOCs from Spent Aerosol Cans

    There are over three billion aerosol cans manufactured in the U.S. annually, 60% of which are consumed by households. Many of the products contained in these cans, such as paint products, light lubricants, starting fluids, polishes and waxes, and cleaners, contain substantial amounts of volatile organic compounds (VOCs) as solvents and include flammable propellants. As a result, partially empty ...


  • Quantitative analysis of Powdered solids case study

    Introduction Infrared quantitative analyses are an everyday requirement in the analytical laboratory. While liquid solutions are commonly analyzed, mixtures of powdered components also exist and often require quantitative analysis without dissolution into a solvent. This paper outlines the development of quantitative analysis methods for two powdered mixtures. The traditional ...


    By Specac Limited

  • The Important Job of Oil Mist Collectors

    The majority of business owners whose manufacturing process requires machinery that uses coolants, lubricants, or oils know how vital it is to keep the spray or mist released, during the operation from collecting on walls, ceilings or floors as much as possible. Emissions that are uncollected, can lead to slippery surfaces and an unhealthy working environment, which is why an  ...


    By ProVent, LLC

  • Composting and biogasification for senna pod waste stabilization

    A medical factory in Finland extracts sennocid from pods of a senna plant with a solvent containing methanol and water. Sennocid is the active compound in some constipation medicines (Otavan Iso Kasvitietosanankirja, 1981). The extraction process produces 50 m3 of pod waste weekly. In 1998, 757 tons of pod waste was produced. The water and methanol contents of the waste are approximately 25 w/w-% ...


    By ORBIT e.V.

  • Process Gass Venting

    Background:This Pfizer facility in Loughbeg manufactures proprietary active ingredients for strong prescription drugs which are then shipped to other facilities, predominantly Lipitor, for finishing. Remaining capacity is allocated to cancer drug manufacture. Most processes in the facility utilize a glass lined reactor vessel to produce large volumes of solvents such as ethyl chloride, acetone, ...


    By FAB-TECH Incorporated

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you