Thermal Destruction Equipment For Waste And Recycling
-
PremiumManufactured by ESCO International (EI)based in UNITED KINGDOM
Thermal ozone destruction proceeds optimally above a minimum temperature. The design incorporates a gas heating device and a heat recovery system using a heat ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
The respect for the environment is one of the main commitments of For.Tec., which constantly develops and updates the technologies for reducing emissions into the atmosphere to be installed on incineration and cremation facilities, that are built ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
Manufactured by Conifer Systemsbased in USA
Direct-Fired Thermal Oxidizers (DTFO) destroy emissions that are created through chemical processes found in industrial exhaust streams through the process of combustion. By raising the exhaust stream temperature, the molecules are safely broken down into carbon dioxide (CO2), water (H2O) and thermal ...
-
Manufactured by NPO Dekanter, LLCbased in RUSSIA
Mobile Thermal Destruction plants Factor-500 (also called as TDP-500) are intended for thermal utilization of oil slimes with extremely high content of mechanical impurity, oil-contaminated soil, drill sludge, oily wastes formed at emergency leaks of oil and oil products, and other loose and pastelike wastes. These plants have no analogs in the market — they completely fit into the standard ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
The installed drying equipment shall be subject to an empty machine test of not less than 4 hours. If a fault occurs during the test operation process, it should be dealt with in time. After the trial operation is completed, tighten all the connecting bolts again, inspect and replenish the lubricant in time, and test the load after the test returns to its original ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
TCR24 is designed to measure soil heat transmission (soil tendency to transmit heat). This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. Measurement can be done on site with the probe supplied, up to a depth of 120 cm, or in case of greater depths, it is possible to ...
-
Manufactured by Komar Industries Inc.based in USA
Komar's Shred-Feed Systems are capable of complete processing of all types of waste materials. These systems can reduce waste to defined piece sizes and them feed the product through to thermal or chemical destruction. These industrial shredder / auger feed combination systems are ideal for handling hazardous or special waste ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
CTS120 is a probe, for measures in the soil (lenght = 120 cm), that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its suitability for soils, thermal ...
-
based in USA
IKHLYAS TECHNOLOGY has developed a safe way to completely recycle plastic waste into useful, ready-to-use, and most importantly, environmentally-sustainable products, without polluting the ...
-
based in CANADA
R3 Environmental Systems owns and operates two types of state-of-the-art Low Temperature Thermal Desorption (LTTD) units that facilitate effective soil treatment. Both the Thermal Desorption with Destruction and Thermal Desorption with Recovery technologies are mobile and have been engineered to meet the most stringent health and safety standards. Contaminants proven capable of being treated ...
-
Manufactured by Emission Rx - Mfg. By Combustion Systems Inc.based in USA
Fugitive Emissions Thermal Oxidizer For Destruction Of Fugitive Emissions & EPA Toxic Release Inventories Gases ...
-
Manufactured by TANN Corporationbased in USA
Regenerative thermal oxidizers (RTO’s) are the most common oxidizer in today’s market. RTO’s are capable of extremely high thermal efficiencies up to 97%. When considering a replacement oxidizer, RTO’s can cut the customer’s gas cost considerably making the switch an easy decision. Due to their high thermal efficiency, RTO’s can often go into ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is used to desorb the VOCs. The desorbate, a highly concentrated ...
-
Manufactured by ARCTECH, Inc.based in USA
Actodemil is a breakthrough approach for the safe destruction of a variety of explosive chemicals. US environmental regulations mandate the phasing out of the current approach of open burning and open detonation. The United Nations prohibits ocean dumping of munitions. Stockpiled munitions are obsolete because they either are unusable or unstable. The US Army has a major demilitarization program ...
-
Manufactured by Komline-Sandersonbased in USA
The Komline-Sanderson Kompress Belt Filter is a broadly applicable product for dewatering municipal Biosolids and industrial ...
-
Manufactured by Alliance Corporationbased in USA
The KRONUS Regenerative Thermal Oxidizer by Alliance Corporation offers the benefits of high heat recovery and process application flexibility of regenerative thermal oxidization, designed in an economical modular package to create an outstanding overall value in emissions control equipment. The KRONUS oxidizer is housed in a single compact box. This integral valve feature eliminates the ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
TLOGWLS heat flux meter for transmittance measurements is characterized by the maximum accuracy in the data acquisition (24 bit resolution) as well as its great versatility and simple operation. Thanks to the use of four probes (for the measure of the contact temperature) and one heat flux plate connected to the main TLOGWLS unit through proper wireless connection (made up of some completely ...
-
Manufactured by Ion Exchange Waterleau Ltd.based in INDIA
Efficient process for thermal destruction of VOCs and pumpable fluids. Low emission levels could be achieved and destruction efficiency > ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you