Thermal Destruction Equipment For Waste And Recycling Available In Sudan
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
The respect for the environment is one of the main commitments of For.Tec., which constantly develops and updates the technologies for reducing emissions into the atmosphere to be installed on incineration and cremation facilities, that are built ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
TLOGWLS heat flux meter for transmittance measurements is characterized by the maximum accuracy in the data acquisition (24 bit resolution) as well as its great versatility and simple operation. Thanks to the use of four probes (for the measure of the contact temperature) and one heat flux plate connected to the main TLOGWLS unit through proper wireless connection (made up of some completely ...
-
Manufactured by Ion Exchange Waterleau Ltd.based in INDIA
Efficient process for thermal destruction of VOCs and pumpable fluids. Low emission levels could be achieved and destruction efficiency > ...
-
Manufactured by Emission Rx - Mfg. By Combustion Systems Inc.based in USA
Fugitive Emissions Thermal Oxidizer For Destruction Of Fugitive Emissions & EPA Toxic Release Inventories Gases ...
-
Manufactured by Komar Industries Inc.based in USA
Komar's Shred-Feed Systems are capable of complete processing of all types of waste materials. These systems can reduce waste to defined piece sizes and them feed the product through to thermal or chemical destruction. These industrial shredder / auger feed combination systems are ideal for handling hazardous or special waste ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
The installed drying equipment shall be subject to an empty machine test of not less than 4 hours. If a fault occurs during the test operation process, it should be dealt with in time. After the trial operation is completed, tighten all the connecting bolts again, inspect and replenish the lubricant in time, and test the load after the test returns to its original ...
-
Manufactured by TANN Corporationbased in USA
Regenerative thermal oxidizers (RTO’s) are the most common oxidizer in today’s market. RTO’s are capable of extremely high thermal efficiencies up to 97%. When considering a replacement oxidizer, RTO’s can cut the customer’s gas cost considerably making the switch an easy decision. Due to their high thermal efficiency, RTO’s can often go into ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
CTS120 is a probe, for measures in the soil (lenght = 120 cm), that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its suitability for soils, thermal ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is used to desorb the VOCs. The desorbate, a highly concentrated ...
-
Manufactured by NPO Dekanter, LLCbased in RUSSIA
Mobile Thermal Destruction plants Factor-500 (also called as TDP-500) are intended for thermal utilization of oil slimes with extremely high content of mechanical impurity, oil-contaminated soil, drill sludge, oily wastes formed at emergency leaks of oil and oil products, and other loose and pastelike wastes. These plants have no analogs in the market — they completely fit into the standard ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical and fast measurement of the thermal conductivity (or thermal resistivity) of the medium in which it is inserted at a high accuracy level. It works in compliance with the ASTM D 5334-00, D 5930-97 and IEEE 442-1981 standards. The probe has proven its ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
TCR24 is designed to measure soil heat transmission (soil tendency to transmit heat). This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. Measurement can be done on site with the probe supplied, up to a depth of 120 cm, or in case of greater depths, it is possible to ...
-
based in USA
IKHLYAS TECHNOLOGY has developed a safe way to completely recycle plastic waste into useful, ready-to-use, and most importantly, environmentally-sustainable products, without polluting the ...
-
Manufactured by Komline-Sandersonbased in USA
The Komline-Sanderson Kompress Belt Filter is a broadly applicable product for dewatering municipal Biosolids and industrial ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) to heat flux meter TLOGWLS. Wireless heat flux meters simplify heat flux measurements on building walls due to lack of wires to be passed inside and outside building to connect two temperature probes to TLOGWLS instrument. TLW2 unit has internal rechargeable battery and ...
-
Manufactured by Primozone Productions ABbased in SWEDEN
Even in a correctly designed ozone water treatment system there will be some residual ozone in the off-gas. With a thermal-catalytic ozone destruct unit any un-reacted vent ozone is efficiently and reliably removed in a very energy efficient ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Removal of Carbon Dioxide from water can be accomplished at low cost using a Branch Air Stripper. The C02 Degasifier is simply an air stripper designed specifically for removal of dissolved carbon dioxide. Ambient air can be used to remove the dissolved gas down to low levels. The quantity of air needed to do this is small. Hydrogen Sulfide (H2S) can be removed from water using air stripping ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) and a bidirectional heat flux plate (FLUX) to heat flux meter TLOGWLS. Wireless heat flux meters simplify heat flux measurements on building walls due to lack of wires to be passed inside and outside building to connect two temperature probes to TLOGWLS instrument. TLW3 unit ...
-
Manufactured by Ion Exchange Waterleau Ltd.based in INDIA
A highly efficient process for thermal destruction of VOCs that utilizes regenerative heat recovwery to minimize fuel costs. Designed to achieve upto 99% removal in a single tower ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you