Thermoplastics Recycling Equipment For Waste And Recycling Available In Prince Edward Island
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Green Park is a modular product made of environmentally friendly, recyclable thermoplastic resin. It makes grassy areas suitable for vehicular traffic by protecting the surface from damage caused by the transit and parking of wheeled vehicles, including heavy equipment. It is distinguished by its ornamental effect, easy to install, maintenance-free, and withstands the stresses of use ...
-
Manufactured by J P Specialties, Inc.based in USA
JPS Standard Irons are specifically designed for welding waterstops and other thermoplastic extruded profiles (expansion joints, seals, etc.). The temperature control can be adjusted from 250°F to 500°F to accommodate various ambient conditions and different polymers. All JPS Standard Irons are constructed with the highest quality ...
-
Manufactured by Inan Plastics Makinalari San. Tic. Ltd. Şti.based in TURKEY
The increasing use of plastic day by day is among the various reasons that is destroying the balance of nature. It is inevitable to take the necessary measures to minimize the rate of use. At this very point, recycling lines are required. Plastics and thermoplastics, which were used in the past and are considered as waste, are transformed into reusable form by going through various processes by ...
-
Manufactured by Special-Litebased in USA
The AF-200 Composite All Fiberglass Door is chemically welded and has smooth FRP face sheets that are primed or painted, plus a choice of two different cores. This door is made-to-order in any combination of width and height size you order up to the maximum size stated below. The all fiberglass construction provides dent resistance, highly corrosive resistant and is easy to clean even when ...
-
Manufactured by Niplast Storage Tanksbased in UNITED KINGDOM
For more than 40 years NIPLAST® storage tanks have stored millions of litres of corrosive solutions for a wide range of industries including water treatment, wastewater treatment, chemical manufacture and processing, food and pharmaceutical processing, and paper manufacture to name a ...
-
Manufactured by Niplast Storage Tanksbased in UNITED KINGDOM
SAFEBULK from NIPLAST ® is a system of liquid chemical storage that provides secondary containment (also called bunding) to the primary chemical storage tank, but as an integral part of the same engineered product. The primary NIPLAST® chemical storage tank is purchased with its own dedicated containment bund, the bund designed and constructed from the same corrosion resistant ...
-
Manufactured by Promeco SpAbased in ITALY
The Promeco Extruder System PES is the simplest, most flexible, efficient and effective solution for the densification and agglomeration of the ...
-
Manufactured by Argotec, a Mativ brandbased in USA
Argotec is a global leader in Thermoplastic Polyurethane (TPU) and Ethylene Vinyl Acetate (EVA) interlayer film solutions for laminating glass. Our diverse Argotec Interlayer Film product line can be custom engineered to offer precision extrusions for a variety of glass lamination applications. Argotec films are unmatched in optical clarity, hot and cold characteristics and offer the best overall ...
-
Manufactured by Aquatech Environmental Systems Ltd.based in CANADA
Aquatech Environmental Systems is the industry leader in aeration tubing for waterways, canals, lakes, ponds, lagoons and wastewater treatment. We have developed O2B2 Fine Bubble Aeration Tubing as an efficient and economical way to deliver Oxygen or C02 into your water bodies . O2B2 has a long lifespan, and can be easily cleaned by changing the pressure within the system. ...
-
based in AUSTRIA
In general rubber powder is differentiated from rubber granulate by the grain size. Fractions below 1 mm (1000 microns) are commonly called rubber powders. Rubber powders can range down to as small as 50 microns with mean particle sizes of 800 microns from wet grinding processes, 600 microns from ambient processes, and 400 microns from cryogenic processes. As rubber granulates is a relatively ...
-
Manufactured by EREMA Engineering Recycling Maschinen und Anlagen Ges.m.b.Hbased in AUSTRIA
INTAREMA T or TE. Two different series that are based on the same compact INTAREMA recycling system featuring a short single-screw extruder. Including, of course, the INTAREMA top technologies Counter Current, Smart Start and ecoSAVE. For more efficiency and productivity in plastics recycling. INTAREMA T without extruder degassing: ideal for non-printed edge trim, cutting waste, rolls, loose ...
-
Manufactured by Midwest Industrial Rubber, Inc. (MIR)based in USA
For solving tracking issues, eliminating tension on a system or improving sanitation, Positive Drive conveyor belts are a viable solution for many conveying systems. MIR provides Positive Drive conveyor belts from top brands and customizes belts in-house to engineer a best-fit solution for your application. ...
-
Manufactured by Boco Pardubice Machines, s.r.obased in CZECH REPUBLIC
Our single screw extruders EB-P are suitable for processing PP, PE, LDPE, HDPE, PVC, PA, TPV, TPE. They can be connected to any peripherals, e.g. for extruding pipes, profiles, filament, flat films, ...
-
Manufactured by Buss-SMS-Canzler GmbHbased in GERMANY
Filmtruder and Viscon processors are specialised in the concentration, purification and devolatilisation of products with viscosities up to 10,000 Pas and are characterised by the following properties: ...
-
Manufactured by RTI Cryogenics Inc.based in CANADA
RTI’s XyComTM TPE Blending system produces the only 100% recycled thermoplastic elastomer (TPE) pellet in the ...
-
Manufactured by Inan Plastics Makinalari San. Tic. Ltd. Şti.based in TURKEY
Unfortunately, the pollution of nature every day is caused by the negligence of us, humans. It is entirely in our hands to protect the environment, the green, and the earth. Various steps can be taken in this context. It is the best move not to abandon the used waste plastics to nature. We can contribute to the recycling of this type of plastics. With the HDPE recycling line, we produce for ...
-
Manufactured by Sunperk Site Furnishingsbased in CANADA
This recycled plastic park bench comes with a unique design for a classy look. The park bench features two-side seats, decorated with ellipse shape in the middle. What’s more, the seat top is made of durable recycled plastic lumber. Whereas, the bench legs and supportive frames are constructed using powder coated mild steel. Most importantly, the park bench is a space saver and a cost ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you