Tramp Iron Equipment For Waste And Recycling Available In Ohio
-
PremiumManufactured by ERGAbased in TURKEY
Eddy current magnetic separators for recovery of nonferrous metals, Tetra Pak packages from MSW ...
-
Manufactured by Filtertechbased in USA
In the process of rolling steel strip, the roll coolant over time will become contaminated with ferrous particles and tramp oil. These contaminants in high enough concentrations can result in increased roll wear and roll changes, reduced production and product quality, increased roll oil and water consumption and decreased coolant life. The Filtertech Model MSI magnetic separator utilizes a ...
-
Manufactured by Ningbo Yate Magnetics Co.,Ltd.based in CHINA
YT Magnetic Bar separator is used for separating ferrous contaminants from free flowing material, which are good choice of bar separator you can find in China. All the ferrous particles like bolts, nuts, chips, damaging tramp iron can be caught and held effectively. So it provides a good solution of material magnetic separation and equipment ...
-
Manufactured by Magnetic Products, Inc. (MPI)based in USA
MPI’s Magnetic Drum Separators and Housing are designed to provide trouble-free automatic extraction of tramp iron from heavy flows of large size and abrasive materials such as coal, aggregates, ores, sugarcane, wheat ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
For 150mm through 450mm pipelines. These high capacity units reduce damage and maintenance to filters, pumps and other process machinery handling liquid ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
50mm pipelines only. This model of Trap is available with both Ferrite and Rare Earth magnetic elements. The unit was designed to serve as a low-cost, pipeline trap where operating conditions are not too ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
The Grate in Housing (GH) is designed to specifically protect against fine and tramp iron contamination found in dry and free-flowing ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Suspension Magnets extract occasional tramp iron from a conveyed product stream on a conveyor belt or vibratory feeder. The Magnet block suspends above a conveyor with sling chains setting the magnet face at the correct angle for optimum extraction. The magnetic field attracts ferrous metal out of the conveyed material and onto the magnet face, remaining securely held until manually cleaned. This ...
-
Manufactured by Chou Magnetics Co,Ltdbased in CHINA
ChouMag Grate/Grid Magnets are designed for product purity for free flowing materials such as carbon black, drugs, chemicals, cosmetics, food products, plastics, grains, spices, sugar, honey, salt and minerals. These units are easily installed in any hopper or floor opening, chute or duct. The Magnetic Grids protect your processing machinery against dangerous tramp iron. Magnetic filter bars ...
-
Manufactured by A & A Magnetics Inc.based in USA
A&A Stationary Suspended Separators are powerful, non-electric units designed to provide efficient separation of ferrous metal from free-flowing granular or clumping materials. These manually cleaned magnetic separators provide maximum protection from equipment damage and related hazards caused by tramp iron. Our magnetic overhead separators are available in five standard strength models with ...
-
Manufactured by A & A Magnetics Inc.based in USA
A&A Magnetic Hump Assemblies were designed to direct product and contaminant flow into the magnetic fields of plate separators. The deflected flow pattern helps to break up clumps of material, providing maximum protection against entrapped contaminants. The hump separator is used where heavy, loose flowing materials such as fibers, chemicals, clay products, grain, feed and sand are conveyed ...
-
Manufactured by Sollau s.r.o.based in CZECH REPUBLIC
Automatic cleaning without a need of interrupting the flow of material. Equal abrasion of protective stainless grate. Thick magnetic sieve. Large intercepting magnetic area. Inspection opening to inspect the course of ...
-
Manufactured by Buntingbased in USA
The new ElectroMax Overband Magnetic Separator from Bunting provides customers with a smaller, lighter, and more compact system without any compromise in separation performance. This low profile, air cooled electromagnetic conveyor meets the ever-increasing demand for high-powered, light, and compact electro ...
-
Manufactured by Dongyang Tianli Electromagnetic Equipment Co., Ltd.based in CHINA
RCDB magnetic separator/electro magnet is engineered for use in high volume and deep burden applications. Its primary advantages are their "deep reach" and the ability to be turned on and off.Mounted over conveyor belt. The magnetic separator is consisting of aluminum wound coils, with its air-cooled mechnism ,can be used in extreme or dusty environments.The magnetic separator usually adjusted by ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
The Shredder Feeder and Discharge Conveyor is a bespoke designed and built heavy-duty system that evenly delivers a range of plastic materials (e.g. in-house rejects, secondary collected plastic waste) and timber into a shredder or granulator. Mounted on the Shredder Feeder and Discharge Conveyor is a Magnetic Separator or Metal Detector, both present to find and/or remove metal contamination ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
The meTRON 07 CI Metal Detector automatically and continuously detects all tramp metal (ferrous, stainless-steel, aluminium, copper, brass, etc) in non-metallic and non-conductive materials. The detector head features integrated electronic control electronics. The meTRON 07 CI is a tailored system solution using reliable conveying technology and selected accessories. There are a wide range of ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Tube and Grid Magnets are one of the most extensively used magnetic separators produced by Bunting. Tube Magnets (Magnetic Rods and Cartridge Magnets) are used individually or in multi-rows to remove problematic ferrous metal from processed materials, prevent damage to processing equipment, and protect product quality. The range of strengths includes Ceramic Ferrite for the separation of ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Suspended Electromagnets automatically remove tramp iron from material flows on belt conveyors or in chutes. ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Inline Magnets are popular with companies transporting materials through pipes due to the ease of installation and effective separation of tramp ferrous metal. The non-obstructive design suits applications in many different applications including food processing and plastics. The body design and finish are either standard or food sanitary. The Inline Magnet is designed to easily connect into ...
-
Manufactured by A & A Magnetics Inc.based in USA
A&A Magnetic Drum Separators are ideal for processing operations where granular or pulverized materials (such as chemicals, tobacco, food, grains, plastics, and rubber) are conveyed in closed chutes. Material is fed in through the top where a revolving cylinder carries it over a stationary magnet. The magnetic field attracts and holds tramp iron beyond the discharge of the cleaned product ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you