Transformer Oil Recycling Articles

  • Digital Technology to Transform Oil, Gas Hiring Practices

    The oil and gas industry’s effort to adopt digital technology not only will impact its daily operations, but its hiring needs as well. The oil and gas industry must pursue digital technology for two reasons: an aging workforce and increased focus on safety, said Mike Weast, IT regional vice president with professional staffing firm Addison Group, in a statement to Rigzone. As the majority ...

  • Transforming waste into profit: Bioconversion soultions

    BioConversion Solutions, LLC (BCS) has the systems and solutions to transform dealing with biomass from an expense into profit for cities and companies worldwide. Instead of sludge requiring treatment and disposal, BCS has developed sophisticated technologies that allow customers to design, build and operate biological conversion plants. Using the proven proprietary Advanced ...

  • State of Oil and Gas Production & Methods for Produced and Flowback Water Treatment - White Paper

    FRACTURING MEANS CLEAN ENERGY AND ECONOMIC GROWTH For over 60 years, hydraulic fracturing (fracking) operations have safely and successfully delivered the oil and natural gas needed to answer our nation's demand. In 2011, the US House of Representatives Committee on Energy and Commerce reported that, "Hydraulic fracturing has opened access to vast domestic reserves of natural gas that ...

  • Transformer Oil Hydrotreating case study

    Hydrogenation of waste transformer oil (electrical insulating oils) can produce an oil product that is far better in quality and yield in comparison with fixed bed clay adsorption or reaction with sodium metal. This is proven at Sequoia- client’s facility in Midwestern USA. The 5 million gallon/year throughput naphthenic oil hydrotreater produces oil free of PCBs (polychlorobiphenyls ...


    By Sequoia Global, Inc.

  • Fabrication of circular shaped ceramic membrane using mixed clays by uniaxial compaction method for the treatment of oily wastewater

    Circular shaped ceramic membrane was fabricated using inexpensive mixed clays by uniaxial compaction method and subsequently fired at 900°C. TGA analysis demonstrates that the minimum sintering temperature required to fabricate the membrane is above 800°C. A volume median diameter d(0.5) of the raw material mixture is found to be 2.78 µm. XRD analysis verifies that the membrane undergoes phase ...


    By Inderscience Publishers

  • Industrial Benefits of Oil Filtration and Cleaning Machinery

    It is highly recommended to keep the machinery oil clean to maintain an optimum level of operational efficiency at the production or manufacturing plants of widespread industrial spheres that depend on the usage of mechanical equipments. By doing so, the plant managers can obtain the extension and longevity in the lifetime of their site machinery. The strong capability of Chongqing Zhongneng Oil ...


  • On-site regeneration of transformer oil

    Regeneration of transformer oil at the transformer’s location is an important preventive measure of transformer servicing.   Transformer life time is, in essence, the life time of its insulation system. The most widely used insulation is liquid insulation (transformer oils) and solid insulation (paper, i.e. cellulose insulation). The oil provides for at ...


    By GlobeCore GmbH

  • Transformer oil quality control

    It is impossible to ensure reliability and longevity of energy systems without controlling the quality of transformer oil. Recent experience shows that approximately 30% of transformer oil, filled in power transformers, has deteriorated to the point when it becomes a risk factor. This is caused both to natural degradation of oil in operation due to thermal oxidation aging, and contamination with ...


    By GlobeCore GmbH

  • Methods of fine oil purification

    High degree of oil purity is a normal requirement of modern hydraulic and lubrication systems. However, oil manufacturers sometimes fail to ensure the required oil purity, hence the need to purify the oil before operation One of the instruments of increasing efficiency of energy generation and consumption is reduction of resources consumed for its production with simultaneous increase ...


    By GlobeCore GmbH

  • Time to replace your transformer?

    Modern oil transformers are not the strongest part of the connection between energy producers and consumers. Transformers have no moving or friction parts, their efficiency of voltage transformation is close to 99%, therefore their life time extends, or rather can be extended well over several decades. Extending transformer lifetime is the one and only most important strategy ...


    By GlobeCore GmbH

  • Why regenerate transformer oil?

    Article contain the information about the most important definition in transformer oil treatment. Its include terms such as transformer oil regeneration, insulation oil regeneration, purification of oils, degassing of oil, oil treatment, filtration by Fuller's earth, desludging, etc.  Regenerating the oil or other insulating medium in a transformer is probably one of the few environmentally ...


    By GlobeCore GmbH

  • Reclamation of oil, diesel fuel cleaning, installation by PC Globecore UVR 450/16

    We dig into the myth that recycled, reclaimed transformer oil (or industrial oil, turbine oil, mineral oil, diesel fuel and other types of mineral oils) is BAD oil, and actually show that reclaimed oil might be BETTER then what you are using now!  Installation for cleaning and clarification of dark heating oil and dark diesel fuel also can be use for regeneration of light ...


  • Why clean transformer oil?

    Related Website: http://www.oilrenew.com http://www.leizeyan.com http://www.zhongnengcq.cn ...


  • Series KPH transformer oil regeneration device

    Application: Series KPH transformer oil regeneration device use of a special active clay for purifying and regenerating the unqualified transformer oil, switch oil, mutual inductor, it also can be used as absorption unit for treating low viscosity lube oils. Series KPH can remove acid, free carbon, oxides, pigment and particles, it dose not affect insulating oil ingredients and anti-oxidation. ...


    By rier oilpurifier company

  • Vacuum Transformer Oil Filtration Machine

    ZY transformer oil filtration machine can remove water, gas and impurities from oil with high efficiency to elevate the withstand capability and quality of oil, it is used for treatment of non-conformable transformer oil, mutual inductor oil and circuit breaker oil in power industry including manufacturing enterprises. ZY transformer oil filtration machine ensures a safe operation of power ...


  • Case study - tailing ponds

    Location: Canada Year: 2012 Working context Oil Sand - Tailing pond dredging - The standard industry practice is to pump oil sands tailings into large settling ponds. There, the heaviest material settles to the bottom, separating from the top layer of water which can be recycled. The problem Oil ...


    By Dragflow North America

  • Transforming an oil tank into a clean water tank - case study

    It would be an almost impossible task, many would claim, to turn an 86 diameter large Orimulsion 400 tank, that has been out of service for years, into a clean watertank. But this was whatEcologica was contracted to do for their client ENELS.p.A. ENEL S.p.A. chose Italian-based Ecologica S.p.A. as service provider for this tank clean atthe ENEL Central e Federico power plant in Brindisi as they ...


  • ZYD-150 Transformer oil purifier working in site case study

    At the latest time, we delivery one ZYD-150 oil purifier machine to one big transformer factory for purify the oil of 110kv transformer, the user high required for the water content, gas content and cleanness. After machine delivery to user place, our engineer teach user to operate machine, the machine purify 4 tons oil for 3 hours, and get the sample to test, every result is ...


  • Bangladesh buyer - Transformer oil purifier case study

    Company name: The Bengal Electric Ltd This company is one big company in Bangladesh; They main business is electric power project, we contacted by email for 3 months, before ordered the transformer oil purifier machine, the boss  and his son visited China Canton fair, meanwhile, they fly to Chongqing to visit our factory. After checked the machine working status, they ordered one unit ...


  • Chile buyer for ZYD-200 case study

    Company name: POWER LTDA This buyer is a main electric equipments maintenance company from Chile, they brought the first one ZYD-200 double stages transformer oil purifier machine in 2010 year, after, they are satisfy with the machine working, so they decide to buy another two units of ZYD-200 transformer oil purifier machine. Until now, we keep good touch with each ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you