Only show results available in Texas? Ok

Triple Shaft Shredder Applications

  • Premium

    Shredders and crushers for barrels and containers (IBCs)

    Acids, alkalis, solvents, isocyanates - Anyone dealing with hazardous substances and transporting them in containers is always faced with the problem of proper disposal of the containers in the end. For a long time, the common practice of reconditioners was to dismantle used and non-reusable containers after cleaning and either recycle or dispose of each substance separately. The plastic inner containers were collected and transported by truck to the waste incineration plant. However, this method caused very high...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Shredding solutions for pharmaceutical industry

    The shredding process of this pharmaceutical waste can be carried out with the three type of machines by SatrindTech: the single shaft, the three- and the four-shaft shredders. The purpose of the process is twofold: to recover the plastic blister and to destroy expired medicines safely.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for textile and carpets industry

    All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for pallets, dry wood in general and green wood industry

    The treatment of this material is mainly for a reuse of this material for energy purpose: with wood shredding we refer to pallet and dry wood shredding while with green wood we consider the crashing of the gardening or agricultural waste. Depending on the desired final size, with dry wood different types of shredders can be used: a crusher or a shredder with T-blades can be used for a mere volume reduction of the material or single-, three- and four- shaft shredders if the purpose is getting a size controlled....

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Aluminum SWARFS

    The aluminum industry recovers much of the material required by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for cardboard and packaging recycling industry

    Cardboard and packaging recycling is intended to recover cellulose from the material treated. It is estimated that we can pulp the material up to six or seven times and that over 50% of the product cardboard produced in Europe comes from the recovery of cellulose. For this purpose, SatrindTech proposes two-shaft shredders for the first application and single-, three- and four- shaft shredders for the second.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for food industry

    This category includes both the wet fraction of MSW (generally collected in the appropriate compostable bags) and all that waste generated by the food industry. If treated properly, this waste can be reintroduced in the production cycle. SatrindTech proposes two-shaft shredders or bag opener for preparing the material for the subsequent steps of separation and composting cycle. If the industrial applications may require a controlled size of the output, the choice has to be fall onto single-, three- and four-shaft...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Metal SWARFS

    The metal industry recovers part of the material by reprocessing machining waste. In order to re-use this kind of waste as the second material, it is necessary to obtain in a suitable size for the subsequent processing stages with briquetting or hammer mills. SatrindTech proposes two-shaft shredders for the volume reduction of the hanks and three- and four-shaft shredders for the subsequent shredding step for obtaining a controlled size of the waste.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for automotive oil filters industry

    The oil filters mounted on cars, trucks and tractors, if shredded and properly processed, can return the 97% of the materials. The components which can be recovered are oil, paper, plastics, ferrous materials and not.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for refuse derived fuel (RDF) industry

    It’s the so-called Residue Derived Fuel, obtained by treating the dry fraction of the MSW that, after having carefully removed glass, metals and inert, has suitable characteristics to be used as an alternative fuel. The mix of materials are paper (less than 50%), plastic (less than 25%), textiles (less than 15%), organic (less than 15%), wood and other (less than 5%). It is mainly used in cement and steel production plants and energy production plants. SatrindTech proposes two-shaft shredders as primary...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for paper waste industry

    The shredding of paper waste is carried out for two main purposes: shredding for recycling or shredding for destroying. In the first case we have a volumetric reduction (done with two-shaft shredders) in order to obtain the ideal size for proceeding with baling or pressing. In the second case, is more related to the safe destruction of the information contained in private and confidential documents, which dimensions have to be done in according to the DIN 66399 directive. This establishes the security parameters...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for hazardous waste industry

    This category includes those industrial waste which, due to their physical and chemical characteristics, have to be subjected to special processes to render them harmless before and during the grinding phase. SatrindTech has developed a nitrogen-blanketing system to defuse the possible explosions during the shredding process. Our company propose customized solutions including shredders to 2, 3 or 4 shafts, whether the requirement is to save space and money for logistic purposes and storage.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for automotive components

    They are all those plastic and textile materials in the car that can be shredded. SatrindTech proposes a two-shaft shredders for volume reduction of bumpers, headlights and three- and four-shaft shredders for shredding automotive interior fabric, sponge and plastic type of synthetic materials.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for Electronic Waste (WEEE)

    The constant technological improvements of the electronic devices and the subsequent obsolescence of the electronic equipment we use on a daily base has increased the amount of the material to be processed in the metal and plastic recycling business. PCs, laptops, smartphones, USB sticks, credit cards, microwaves, washing machines are just some examples of the products that can be processed in order to recover materials.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for SRF (specified recovered fuel) sector

    The SRF (Solid Recovered Fuel / Specified Recovered Fuel) is a fuel produced by shredding and dehydrating MSW (plastic, paper, textile fibers, etc.), of non-hazardous waste (both urban and special) through appropriate treatments from other non-combustible materials, such as glass, metals and inert.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for hospital waste industry

    This category includes various products and materials collected in hospitals: hazardous waste (eg catheters, disposable gloves, test tubes, disposable gowns, material for dressing, etc.). lab hazardous waste as a result of the carrying out of research activities and bacteriological diagnostics (for example: land plates, contaminated culture, etc.). cutting waste (for example: needles, syringes, scalpels, etc.). unrecognizable organs and body parts empty containers (for example: of medicines, of disinfectants, of...

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for aluminum cans

    The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. In addition to that SatrindTech offers customized solutions for a solid and liquid separation in case the material to be treated are filled cans.

    By SatrindTech Srl based in Arluno, ITALY.

  • Shredding solutions for computer hard disks

    Computer hard disks are one of the electrical and electronic equipment waste largest category, commonly called WEEE. Several regulations govern the disposal of this type of waste, which contains several rare metals that can be recovered and recycled.

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you