Tube Cleaning Equipment For Waste And Recycling Available In Wyoming
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The FlexLance Master hose feeding unit is an add-on system to the PreventMaster SFV 1200-1 positioning unit. This is used for the remotely controlled in/out travel of the high-pressure hose in tube bundle heat exchangers. The Lance feeding unit increases the safety for the user and makes effortless working possible. ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The TubeMaster hose feeding unit makes simple and effective tube cleaning up to 1400 bar possible. This is especially suitable for tubes with non-linear geometries and diameters up to 500 mm. The reason for this is a rotating high-pressure hose connected to a whirl jet nozzle. TubeMaster continuously slides the hose into the tube to be cleaned. The torque protection prevents the high-pressure ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Mercury determination in the trace and ultratrace range. Efficient - automated and time-controlled flow injection technology. Safe - bubble sensor, optimized drying membrane and cascade enrichment. Effective - low reagent consumption, short measurement ...
-
Manufactured by Aquasyn LLCbased in USA
Typically used for inserting into vessels and tanks for either filling or emptying fluids our dip tubes are designed to suit your specific requirements and manufactured to tight tolerances & high internal ...
-
Manufactured by DERC Salotechbased in NETHERLANDS
The Tube Cleaning Nozzle for All Tubes. The DERC Runner Nozzle is a rotating tube cleaning nozzle, designed for cleaning heat exchanger tubes. The DERC Runner Nozzle has a maximum working pressure of 1500 bar/ 22K PSI and is available with various nozzle heads to remove hard plugs or ...
-
Manufactured by DERC Salotechbased in NETHERLANDS
The DERC Runner Nozzle is a tube bundle cleaning nozzle, designed for cleaning heat exchanger tubes. It features a rotating design and effectively removes hard plugs or scales from the tubes. The Runner Nozzle comes in four different sizes, allowing for versatility in tube sizes. ...
-
Manufactured by Aqua Energy International Limitedbased in UNITED KINGDOM
The I-930-5 robotic five lance tube cleaner cleans 3 or 5 tubes at the same time and offers unequalled productivity. It cleans tube bundles up to 10metres long and tubes as small as 10mm ID (longer lance versions ...
-
Manufactured by Trii-plex Jettech Systemsbased in INDIA
TRIIPLEX High Pressure Water Jet Pump Machines are rated working pressure up to 450 bar/6527 psi and Flow Rate of up to 80 l/min. With Ceramic Plunger Cooling ...
-
Manufactured by Flowplant Group Limitedbased in UNITED KINGDOM
The Aqua AHF215 triplex plunger pump is a high pressure direct acting pump capable of pressures up to 1000 bar (15,000 psi) and flows to 390 l/min (86 gpm). It is available with 16 plunger sizes and 4 gearbox ratios providing numerous pressure and flow combinations to suit all applications. Drive power can be diesel or electric and the gearbox is integral to the crankcase making the design ...
-
Manufactured by Goodway Technologies Corporationbased in USA
Chiller tube cleaning better than ever before. Not only does the RAM-PRO-XL® featuring TubeGuard technology clean tubes better than ever, it also protects them from oxidation and corrosion while the chiller is offline after cleaning. This unit is designed from top to bottom to deliver cleaner chiller tubes. It boasts a completely redesigned body, advanced chain drive system and a patented ...
-
Manufactured by StoneAge, Inc.based in USA
The StoneAge AutoBox ABX-2L is an automated system for “hands-free” heat exchanger tube cleaning applications. It is designed with an emphasis on safety, ease of setup, portability and reliability. When paired with StoneAge Banshee rotary tube cleaning nozzles and lightweight positioner, the AutoBox ABX-2L offers safe and efficient tube cleaning in the harshest exchanger ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY ZBLR ball-catcher consists of a flanged spool piece in which a curved, fixed, concave ball-arresting bar screen is installed. It cannot be by-passed by the balls. An oscillating raking arm with a comb sweeps the balls towards the ball-collection boxes on each side of the rack from where they exit towards the ball-handling skid which comprises the ball pump, the ball counter and ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The efficiency of a condenser tube-cleaning system is dependent on the quality of the cleaning balls injected to clean the tubes. The sponge balls have a diameter that is slightly larger than the ID of the condenser tubes, allowing them to have constant contact with the tube walls. The balls gently scrub and sweep the tubes as they move through ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The BEAUDREY “W” debris filter is installed at the inlet of a condenser to arrest all debris that may obstruct or interfere with the cooling water flow in the condenser tubes and with the eventual downstream tube-cleaning system. The debris are those that have by-passed the intake screens or grown past them in the pump pits and culverts (seaweed, grass, shells, eels, etc). Debris ...
-
Manufactured by Calder Limitedbased in UNITED KINGDOM
From major construction and civil engineering projects, the decommissioning and decontamination of nuclear installations, the surface preparation of ships’ hulls, to the removal of product contamination in chemical plant, vessels and reactors, our MultiJet machines have led the high pressure water jetting industry for over 30 ...
-
Manufactured by Arthur Products Companybased in USA
Tube cleaning nozzle has three grooves to allow for staggered drill patterns providing powerful polishing and ...
-
Manufactured by DERC Salotechbased in NETHERLANDS
360° Cleaning Result: The DERC Spin-Jet nozzles are designed for cleaning heat exchanger tubes and pipe lines with high pressure water jetting technology. The water flow of your high pressure pump rotates the DERC Spin-Jets. DERC Salotech manufactures a complete range of rotating Spin-Jet tube cleaning nozzles. The DERC Spin-Jets give perfect 360° cleaning ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Removing scale from heat exchangers and condenser tubes is costly and labor-intensive. The productivity lost during such downtime can never be recovered. The Brackett Green automatic tube cleaning system (ATCS) eliminates maintenance costs associated with chemical/offline cleaning. By injecting appropriately sized elastomer balls into the tubes, the ATCS wipes them clean of deposits. This simple ...
-
Manufactured by WSA Engineered Systemsbased in USA
This type of ATCS is applied exclusively to condensers and heat exchangers with water tubeside. The Ball type ATCS functions through the creation of a closed loop within the greater circulating water system. Within this closed loop sponge rubber balls are circulated, which by random selection flow through all tubes on a frequent basis, thereby maintaining optimum tubeside cleanliness. The system ...
-
Manufactured by WATCO PTE Ltdbased in SINGAPORE
Automatic and continuous brush cleaning system for (chiller) condensers and shell and tube heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you