Underground Waste Collection Articles

  • Waste handling systems for hygiene product manufacturers

    Valvan Baling systems is the preferred supplier for waste handling systems at several renowned hygiene product manufacturing companies. One of the largest producers of hygiene products, such as diapers and feminine care, has built a new state-of-the-art plant. All the trim waste from the production lines is handled through a waste handling system, built and installed by Valvan Baling ...


    By Valvan Baling Systems NV

  • Rear Loaded Garbage Body Parts

    Hydraulic garbage trucks are home waste collecting and transporting vehicles which are loaded either by hand or by container. In garbage trucks produced by HİDRO-MAK, body, discharge plate, hopper, compaction plate and hydraulic-pneumatic-electric diagrams are produced as a whole. ...


    By HidroMak

  • Florida-based BlueLinx makes cash from wood scrap - Case Study

    Headquartered out of Atlanta, Georgia, BlueLinx Co. is a renowned manufacturer of wood components and building products in North America. The Lake City, Florida plant is just one of the company’s forty-eight distribution centers and is home to forty-two employees including technicians and sales representatives for the corporation. BlueLinx of Lake City noticed a significant amount of scrap ...


    By WEIMA

  • Things to know about the federal government`s nuke dump

    Valentine's Day 2014 was coming to a close. There were fewer than a dozen workers holding down the night shift at the federal government's nuclear waste repository in southern New Mexico. An alarm sounded inside the central monitoring room less than an hour before midnight. Somewhere in the underground salt caverns, radioactivity triggered the ...


    By Associated Press

  • BT-Wolfgang binder erected new glass powder plant for Geocell for the production of foam glass ballast in upper Austria

    The planning, delivery and installation of the complete machine and electro engineering equipment for the glass powder plant from the company GEOCELL, one of the leading producers of foam glass ballast in Europe, was carried out by the company BT-Wolfgang Binder GmbH from Gleisdorf, as general contractor. Initial situation: Before construction of the plant, the glass powder was ...

  • St. Olavs Hospital - case study

    At the St. Olavs Hospital in Trondheim the existing buildings are demolished and new hospital facilities are constructed on a surface of 206 600 m2m². The new hospital will have 900 beds. The hospital has chosen an Envac vacuum waste system to provide a high service level and stand up to the high demands on hygiene, occupational health and safety. A new source separating technology for ...


    By Envac AB

  • Dubai's neat streets as rubbish is swept under the concrete

    Underground system is more hygienic and environment friendly Each compactor replaces more than 200 ordinary waste containers Dubai In a major initiative, the Dubai Municipality unveiled its fully automated underground waste compactor project, a clean and safe modern waste management solution which collects waste and compresses it underground using the latest ...


    By HABA Products - Elo Group Oy

  • Contenur Polska attends Poleko 2011 for the first time

    Our company was presented for the first time to the Polish market by our Polish filial company Contenur Polska at the Poleko International Environmental Protection Show that was held on the 22nd, 23rd, 24th and 25th of November in the Polish city of Poznan. The Show was very well attended by exhibiters from the waste processing and town fittings, renewable energies and ...


  • Wastes utilisation in foundries and metallurgical plants with pneumatic conveying techniques – selected aspects

    The issue of wastes disposal and utilisation in metallurgical and foundry industries is crucial in present economical and environmental protection conditions. The metallurgical processes generate enormous amounts of wastes every year. The considerable amount of wastes is furnace dust (the amount varies from the type of furnace) and other fine materials. At the Department of Foundry, Silesian ...


    By Inderscience Publishers

  • Spending small to save big in a downturn

    How strategic upgrades in bulk handling components can pay off in the short term "You can"t save your way to solvency" goes the business adage, but suggesting major capital improvements with long-term pay-out in tight economic times may send your co-workers running for cover. Prosperity can often be found between both extremes, where strategically placed equipment upgrades can instantly reduce or ...


    By Flexicon Corporation

  • Underground gasoline extraction made easier

    The Abanaki PetroXtractor® -Well Oil Skimmer, used for the removal of oil, fuel, and other floating hydrocarbons from water, where access is limited, was recently evaluated by BJAMM Environmental, Inc. of Canal Fulton, Ohio. Working closely with the Ohio EPA and the Bureau of Underground Storage Agency, this group of consultants deal primarily with gasoline stations using underground storage and ...


    By Abanaki Corporation

  • Geotube Containers Offer Innovative Solution for Disposal of Coal Mine Slurry Waste - Case Study

    TenCate helps North River Mine continue processing coal by utilizing first ever large-scale Geobag disposal method. In 2007, the North River Mine coal processing plant in Berry, Alabama was in a bind. Due to new regulatory restrictions, available area, and construction scheduling, the plant was facing a possible interruption of the primary disposal methods of its refuse - a waste stream ...

  • Pneumatic powder injection technique as a tool for waste utilisation

    The problem of wastes in metallurgical and foundry industries is very important. The considerable amount of wastes is furnace dusts and other fine materials. At the Department of Foundry, the experiments with the use of pneumatic injection method were carried out to utilise these materials. The results of dusts injection into cupola, slag foaming with the use of powdered coal-furnace dusts ...


    By Inderscience Publishers

  • Application of an intelligent decision system to nuclear waste repository option analysis

    This paper presents how the evidential reasoning approach for multi-criteria decision analysis, with the support of its software implementation, Intelligent Decision System (IDS), can be used to analyse whether low level radioactive waste should be stored at the surface or buried deep underground in the territory of the community of Mol in Belgium. Following an outline of the problem and the ...


    By Inderscience Publishers

  • Asahi/America Application Story – Water / Waste Treatment

    The City of Valdosta, GA need to upgrade their Wastewater treatment plants Chemical & Scrubber Systems Their OLD LEAKING CAUSTIC SYSTEM was Piped in CPVC and painted Red color. The entire piping system from the Chemical Room to point of use was to be replaced due to multiple failures both above and below ground. The OLD CPVC carrier; clear PVC 'Clam Shell' containment D/C System had failed ...


    By Asahi/America, Inc.

  • Cobalt and its compounds

    Abstract Cobalt is a compound that occurs in nature. It occurs in many different chemical forms. Pure cobalt is a steel-gray, shiny, hard metal. Cobalt used in industry is imported or obtained by recycling scrap metal that contains cobalt. It is used to make alloys (mixtures of metals), colored pigments, and as a drier for paint and porcelain enamel used on steel bathroom fixtures, large ...


    By Valahia University

  • Mine Waste Technology Program: Underground Mine Source Control Demonstration Project

    This report presents results of the Mine Waste Technology Program Activity III, Project 8, Underground Mine Source Control Demonstration Project implemented and funded by the U. S. Environmental Protection Agency (EPA) and jointly administered by EPA and the U. S. Department of Energy (DOE). Project 8 addresses EPA’s technical issue of Mobile Toxic Constituents – Water − through a field ...

  • The Power to Separate

    Gravity separators are effective and economical tools used to process wastewater and stormwater by removing pollutants such as sediment, hydrocarbons and debris through the process of sedimentation or flotation. Most separators have few or no moving parts, are easy to maintain and have a successful history of use in many different industrial, commercial and residential applications. Specifying ...


    By BaySaver Technologies, Inc.

  • Best management practices for automobile salvage yards

    This paper collects a group of best management practices (BMPs) that outline the techniques needed to establish an environmentally friendly automobile recycling facility. Using common as well as unique BMPs from several different states, a full but not detailed set of management practices has been established. Since every facility is different, each facility will need a set of BMPs that meets its ...


    By Inderscience Publishers

  • Abandoned Wells and Mines as Underground Storage for Waste Management

    Abstract Albania is a rich country in oil, mineral and water sources as well as a very polluted one in Europe There are a lot of wastes that couldn’t be managed in existing circumstances. At the present many oil and gas fields are in the third or depleted phase of the exploitation, while a lot of mines are abandoned. In this frame the paper presents some considerations to use them as underground ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you