Vacuum Cleaners Equipment For Waste And Recycling In Virginia
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen NovolaK Vinyl Ester FibreLine No. 440 is a fiber-filled lining used for the chemical-resistant construction or rehabilitation of structures common to the power, pulp & paper, and petrochemical industries. Typical applications are the protection of sumps, ducts, tanks, containment areas, trenches, walls, and other support columns or bases. No. 440 is specifically formulatedfor ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210S is a fiber-filled, spray-applied lining specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. 210S’s application properties permit economical protection of new and rehabilitated substrates. When cured, 210S provides an impermeable, high-strength, corrosion resistant lining ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak Glaze Series is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is ...
-
Manufactured by Phipps & Bird, INC.based in USA
Ideally suited to procedures outlined in Standard Methods For The Examination of Water and Wastewater (Solids/Residue Section) and other applications where vacuum filtration is ...
-
Manufactured by American Manufacturing Company, Inc.based in USA
The Tank Alarm "TA1" provides a versatile means of indicating an alarm condition in a water or wastewater system. The unit has an amber "Power On" light to indicate it is in service and the unit will sense a high level condition (or a low level condition by just changing the floats). The Alarm condition provides a red light and sound. the sound may be turned off until the alarm condition is ...
-
Manufactured by Travaini Pumpsbased in USA
Pressure Range : 135 to 760 TORR. Capacity : 1375 to 2675 CFM. Features : Single stage vacuum pump with external sealed bearings. Shaft Sealing Options : Stuffing box (Mechanical seal optional). Options : Bareshaft pump Coupled to electric motor V-Belt driven. Optional Accessories : Available as a component in larger assembly. ...
-
Manufactured by Mid-Atlantic Environmental Equipment, Inc.based in USA
The high vacuum dual phase extraction process involves the subsurface removal of air, water, and product. The main determining factor behind the selection of the high vacuum blower is the expected operating vacuum level. Rotary Claw blowers and Liquid ring pumps are most suitable for vacuum levels of 20-29 inches mercury (Hg). Each Dual Phase Extraction System is manufactured to meet your design ...
-
Manufactured by Indoor Biotechnologies, Inc.based in USA
A collection and extraction device that makes testing for allergens an easy and convenient process. Our DUSTREAM® collectors allow clean and convenient dust sampling within 2 minutes. DUSTREAM collectors fit most vacuum cleaners and are preferred for submitting samples for MARIA® and ELISA testing as part of our INDOOR Allergen Analysis ...
-
Manufactured by United Rentals Europe, formerly known as BakerCorpbased in NETHERLANDS
Refineries, chemical facilities, wastewater treatment plants, tank cleaning and heating thick ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
The Allergen Dust collector is a moulded plastic device with an inner dust collector which fits onto the wand of most vacuum cleaners. Used to take samples of indoor molds and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210RS is a rotary spray-applied material specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. The application properties of 210RS permit economical protection of new and rehabilitated ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen RestoKrete Filler - Compound No. 209 is an epoxy formulation specifically designed to fill voids, irregularities, and air pockets in concrete and steel. The filler compound provides a smooth surface for the application of epoxy monolithics. No. 209 is not compatible with vinyl ester topcoats. The No. 209FS is a faster setting ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy Polymer Concrete - 165 is a castable material for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 165 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods for 165 are similar to those used for Portland ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak™ Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak™ has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy NovolaK Polymer Concrete 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 265 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Sheet Membrane No. 90 is an impervious synthetic elastomer of uniform quality and thickness for use in corrosion- resistant construction. It is a fiber-reinforced poly-tetra-fluoro-ethylene (PTFE) lining system. No. 90 replaces rubber, plastic and asphalt membranes commonly used on floors, tanks and process vessels, between substrate and acid/alkali-resistant brick. The elastomeric ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation. Data should not be used for specification ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen VEMatte Reinforced System No. 470 is a multiple layer, 120-mil, fiberglass reinforced lining for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, and floors. This series of novolak vinyl ester linings offers superior resistance to mostinorganic acids, caustics, oxidizing solutions, solvents, and bleaches up to 250°F. The VEMatte system includes ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you