Only show results available in Connecticut? Ok

Vacuum Cleaners services for Waste and Recycling

  • High Pressure Water Jetting

    Hydroblasting is the most commonly used industrial cleaning application for penetration and removal of heavy deposits. Our extensive fleet of High Pressure Pumps up to 2500 bar with large volume water being delivered to the HP cleaning tools. This enables us to remove difficult materials such as hardened polymer and/or coked or fused catalyst.A ...

    By CR Asia based in Nikompattana, THAILAND.

  • Materials Vacuuming and Aspiration

    Our company has a lot of experiences in the solutions of problematic works as follows: liquid, pultaceous, dusty and piece materials vacuuming, aspiration from a distance of 300 m and a depth up to 70 m, liquid, non-cohesive and grained materials blowing out on height up to 25 m, inflammable materials ATEX aspiration, semi-rigid, liquid and ...

    By HYDRODYNAMIC, spol. s r.o. based in Zlaté Moravce, SLOVAKIA.

  • Acoustical Testing Services

    Intertek can assist with all facets of acoustical testing, helping you meet third-party acoustical and airflow performance requirements defined by specifiers, buyers, and regulatory authorities. Turnaround times for many of our tests are less than one week from receipt of sample to issuing of test report.

    By Intertek Testing Services Ltd. based in London, UNITED KINGDOM. from Building Products Service line

  • Spare Parts Service

    Using non-original spare parts, the manufacturer’s warranty of your plant expires. Even worse: a spare part of lower quality may even harm your entire plant and cause a total damage as a consequence. For this reason, an absolutely harmonious interplay of the single components is essential for the optimal performance, profitability and ...

    By BETH Filtration GmbH based in Lubeck, GERMANY.

  • Air Duct Cleaning Service

    The method used by us at Water Damage Support for Air Duct Cleaning ensures that all your ducts are being cleaned by using the most advanced equipment available for source removal. The high-tech and advanced duct cleaners used by professional cleaners at Water Damage Support is one of the most advanced cleaning technology used throughout the Los ...

    By Water Damage Support based in Tarzana, CALIFORNIA (USA). from Cleaning Services Service line

  • Spare Parts Services

    As part of our ongoing product development effort, we invest significant resources in designing new components and parts. Our spare parts are made in keeping with original Simatek specifications – in terms of fit, finish,durability and safety. And they go through a strict quality control process.

    By Simatek A/S based in Soroe, DENMARK.

  • Vacuum Engineering Services

    We offer a complete program of suction equipment (wet and dry vacuum cleaner) for the industry: Whether e.g. coolants, oils etc. are to be sucked abrasive dust, metal chips,; with our complete program we offer the ideal solution. Our devices are solid Swedish products of the house PULLMAN. Sauger PULLMAN test specification 350 P. this emptying ...

    By Grampelhuber Gesellschaft m.b.H. based in Gmunden, AUSTRIA.

  • FPSO Maintenance Services

    Sureclean are a major provider of maintenance services for Floating Production Storage and Offtake Units, (FPSOs) or similar type vessels worldwide.Complementing our fleet of high pressure (HP) and ultra high pressure (UHP) jetting equipment, we own an extensive inventory of specialist vacuum and pumping technology which is suited to the ...

    By Sureclean Limited based in Alness, UNITED KINGDOM. from Markets Service line

  • Sewer Pipe Cleaning Operation Services

    Sewer pipe cleaning operations are carried out throughout the year, though they are more frequently done in summer and fall. These are times when the rain tends to cause dirt and debris which clogs up the sewage systems. Professionals use two systems of cleaning – jetting and vacuuming.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Medical Filter Testing Services

    A range of testing services available for consumer filtration products, including: Motor Emissions, Filter Retention Efficiency, Internal Seals, HEPA Ratings, MERV Ratings, Clear Air Delivery Rates (CADR).

    By IBR Inter Basic Resources Inc. based in Grass Lake, MICHIGAN (USA).

  • Vacuum, Room Air and Furnace Filters

    Testing of Vacuum Cleaners, Furnace Filters and Room Air Cleaners For:. Motor Emissions. Filter Retention Efficiency. Internal Seals. HEPA Ratings. MERV Ratings. Clean Air Delivery Rates (CADR).

    By IBR Inter Basic Resources Inc. based in Grass Lake, MICHIGAN (USA).

  • Centralised Vacuum Cleaning

    The Control of Substances Hazardous to Health Legislation states that the sweeping of dusts from surfaces must be avoided at all times. The use of vacuum cleaning technology prevents surface dusts from becoming airborne and subsequently inhaled via a trouble-free process. This means that as well as bringing health benefits to your employees and ...

    By MECHON Limited based in Twickenham, UNITED KINGDOM.

  • Centralized Cleaning Services

    The cleaning of industrial spaces, buses and train locomotives can be easily performed through the installation of a centralized cleaning system. The solution we suggest consists of a high vacuum centralized suction system with small diameter piping network, extended to all working spaces. A flexible pipe, working in the same way as vacuum ...

    By Air Ecosystem S.r.l. based in Cernusco sul Naviglio, ITALY.

  • Waste Electrical and Electronic Equipment (WEEE) Recycling

    In compliance with the Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) Light Brothers offer comprehensive collection and treatment services for all ten categories of WEEE at their five Approved Authorised Treatment Facilities (AATF) throughout the UK.

    By MDJ Light Bros Ltd based in Lewes, UNITED KINGDOM.

  • Air Filter Testing Services

    Tests for particle retention, capacity, pressure drop and motor emissions: Automotive engine intake and cabin air. Household vacuum and room cleaners. Respirators. Particulate and odor/fume retention and capacity. Compressed air and coalescing filters. Aerospace engine intake.

    By IBR Inter Basic Resources Inc. based in Grass Lake, MICHIGAN (USA).

  • WEEE Recycling

    No matter what business or industry you’re in,ShPhas a solution to help you manage and comply with theWEEEdirective.

    By ShP Limited based in Morecamb, UNITED KINGDOM.

  • Industrial Cleaning Services

    Factories. Industrial sites. Our industrial cleaning experts visit your site and create a tailored plan that’s perfect for your space and equipment. Then we clean. Our advanced technology, machinery and chemicals make light work of even the toughest cleaning challenges. And we bring in our super-sized, specialised cleaning machines – ...

    By Averda Environmental Services LLC based in Muscat, OMAN. from Technical Waste Solutions Service line

  • Tank and Vessel Cleaning Services

    In today's safety conscious work place, the preferred option is of no-man entry into a confined space; accordingly Sureclean has developed a range of technologies and methods using tank cleaning heads, vacuum transfer systems and other pumping solutions to clean tanks and vessels either remotely or with minimum man entry.

    By Sureclean Limited based in Alness, UNITED KINGDOM. from Tank and Vessel Cleaning Service line

  • Inspections, Repairs and Certification

    Supplying quality and ensuring safety in our industry is the order of the day. The environmental requirements and sustainability are also become increasingly important. To ensure compliance with all these, we allow periodic inspections and also ensure testing and inspection of your equipment.

    By Dehaco B.V. based in Lisserbroek, NETHERLANDS.

  • Turnkey Pneumatic Conveying Systems & Maintenance Services

    Full Service Maintenance, Inspections and Trouble Shooting Support. Baghouse & Industrial Sheet Metal Services, Inc. Specializes in Turnkey Design, Fabrication and Installation of Pneumatic Conveying Systems with diverse capabilities and design methods which stems from our vast application experience in so many different industries. We also ...

    By Baghouse and Industrial Sheet Metal Services, Inc. based in Corona, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you