Vacuum Waste Collection Equipment For Waste And Recycling Available In Djibouti
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This is a semi-mobile electrical powered vacloader equipped with built-in hydraulic tipping system. It can be towed/connected to i.e. a tractor. It is perfect for both wet and dry materials and most often used in industrial applications where collection of dust is ...
-
Manufactured by Raetts Rui Tian Electrical Technology Co.,Ltd.based in CHINA
The impellers in the air blower are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high differential pressure is ensured by the arrangement of the bearings outside the compression chamber. The gas it has taken in through the inlet 1 channel 2. As it enters the side, the rotating impeller 3 imparts velocity to the ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Gas blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank blanketing valve maintains an inert gas blanket (usually nitrogen or carbon-dioxide) in the vapor space of a pressure-tight liquid storage vessel. This process is accomplished by utilizing a steady high-pressure gas source ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
Direct acting pressure relief valves (also known as breather valves, conservation vents, or safety vents) are special types of relief valves which are specifically designed for tank protection. This pressure-only unit allows pressure relief to atmosphere. Pressure relief valves are used extensively on bulk storage tanks, including fixed roof tanks with floating covers, to minimise evaporation ...
-
Manufactured by China Excellent Vial Factorybased in CHINA
1 Size: cylinder 300*100*188mm or 300*100*228mm( (L * W * H); 2 hole number: 19; 3 hole spacing: 27mm; 4 hole height and arrangement: upper and lower cross (front row height out of the panel 10mm, rear panel 20mm), front and back row cross not parallel; 5 waste disposal: at the bottom of the cylinder can be used to collect waste liquid, or during the vacuum, waste can be automatically collected ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This vacloader has a modern design to it and an easy to operate control system including a telematic alarm system feature. It has a reduced noise level and its design provides great service accessibility. It has great flexibility for different applications with multiple add-ons available. It is equipped with suction and blow features and its round tank design makes it suitable for wet and dry ...
-
Manufactured by General Plastics Manufacturing Co.based in USA
FR-3700 is a CFC-free, rigid, closed-cell, flame-retardant polyurethane foam available in densities ranging from 3 to 40 pounds per cubic foot. It exhibits a high strength-to-weight ratio due to its cellular structure and cross-linked resin. Because of its closed-cell structure, LAST-A-FOAM FR-3700 has great resistance to water absorption, and will not swell, crack, or split on exposure to water. ...
-
based in SPAIN
Compact plants designed by URD are the solution for the automatic collection of waste and laundry in small and medium areas, up to 5 tons/day. A compact plant requires a minimum installation and very little space, it also allows to implement the latest innovations in Pay-as-you-throw systems. Its cost makes it a very attractive investment, offering many advantages compared to manual handling ...
-
Manufactured by Extractabilitybased in UNITED KINGDOM
ProtectoXtract is a BGIA approved mobile high-vacuum extraction system for filtration of particulate fumes, dusts and some gases. The ProtectoXtract uses a 5-stage filtration system, with replaceable filters and is quiet in operation 68dBA. The ProtectoXtract is supplied with 3m suction arm, hose with internal joints, filter and provides air movement of 2500 m3/h. Compliant with DIN EN ISO ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Model 94110 Vacuum Vent is designed using more than 90 years of experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs 94065 FRP Series Manhole Cover is designed to provide emergency venting and vacuum relief of low-pressure storage tanks and vessels. These covers also provide quick, easy access for tank inspection and maintenance. When the tank is exposed to abnormal internal pressure or vacuum beyond the capability of the conservation vent, the manhole protects the tank against costly ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
Mobile and stationary vacuum cleaning system. The KLMA-30 is a compact multipurpose vacuum system for: material handling, industrial clean-up, recycling, local ...
-
Manufactured by Elmac Technologies - KnitMesh Technologiesbased in UNITED KINGDOM
Direct acting pressure and vacuum relief valves (also known as breather valves, conservation vents, or safety vents) are special types of relief valves which are specifically designed for tank protection. This combined unit allows pressure and vacuum relief to ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This vacloader is equipped with a separate diesel engine which makes it possible for the vacloader to operate independently of the truck. It has a suction only feature and provides great flexibility for different applications with multiple add-ons available. Its square tank design makes it suitable for dry applications and it’s often used in following industries: cement, steel, building, ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Model 94103 Static Pressure Vacuum Vent design incorporates more than 90 years of experience in the development of quality safety and conservation fittings. This model is specifically designed to operate at static pressures up to 150psi and at temperature ranges from minus 50° to plus 200° Fahrenheit. Provisions for high vacuum settings are ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This is a semi-mobile diesel powered vacloader mounted onto a roll-on/roll-off frame. It can operate on the truck chassis or at ground level. It is perfect for handling both wet and dry materials and most often used in industrial applications where collection of dust is required i.e. cleaning out deep pits, trenches, becket elevators, and conveyor spills ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs FRP 94063 Series Manhole Cover is designed to provide emergency venting relief of low-pressure storage tanks and vessels. These covers also provide quick, easy access for tank inspection and maintenance. When the tank is exposed to abnormal internal pressure beyond the capability of the conservation vent, the manhole protects the tank against costly ...
-
Manufactured by Pentek Inc.based in USA
The Pentek Knock-Out Drum is the perfect accessory to your HEPA vacuum waste collection scheme. When inserted between the waste and the VAC-PAC, you are assured of trouble-free, automated operation with no downtime and minimum maintenance ...
-
Manufactured by Disab Vacuum Technologybased in SWEDEN
This is a semi-mobile diesel powered vacloader equipped with built-in hydraulic tipping system. It can be towed by a 3.5 ton vehicle on public roads. It is perfect for handling both wet and dry materials and most often used in industrial applications where collection of dust is ...
-
Manufactured by AcornVac, Inc.based in USA
The 200 Series vacuum toilet and fixture waste system effectively and efficiently collects waste with two 30-gallon collection tanks and a PLC driven automatic control panel. Single frame, factory-assembled vacuum center. Compact size alleviates space constraints. UPC and CUPC ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you