Waste And Recycling Vehicles Equipment For Waste And Recycling Available In Monaco
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 6000 AST is a unique, tri-mode, electric pressure washer system combining the functionality of a cold water pressure washer, hot water pressure washer, and steam pressure washer into one versatile unit. Exclusively to Daimer pressure washers, this model features the one-of-a-kind AST® (Automatic Shutoff ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Unsurpassed throughput and payload make the MDS-18 an industry game ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 7000 is a rugged and durable wet steam pressure washer. Built to last and appropriate for countless applications. The tremendous heat and low flow rate allows for incredibly efficient cleaning/degreasing while keeping water consumption to a minimum. ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The all new MDS-15 is the perfect compromise between our MDS-12 and MDS-18 models. Still very maneouverable on tight city streets and country lanes yet with a class leading 4,500 kg payload it can get almost any route completed. The MDS-15 is available in either "GT" (Ground Tip Tunnel) or "H" (Internal Feed with Cart Tipper) model ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 11800 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Add the ST-HDC to any new Shred-Tech truck or retrofit an existing unit. The ST-HDC adds to your bottom line by providing an additional revenue stream for your ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDS-30GT’s brilliant design results in amazing throughput and payload at an equally amazing price. The MDS-30GT is all about performance, with class leading payload of up to 14,000 lbs and throughput up to 6,500 lbs /hr. The MDS-30GT is designed to be cost efficient, reliable and competitively ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The compact MDS-12 model was designed with urban cities such as London, Dublin and Amsterdam in mind. Its maneouverability combined with a throughput of up to 2,041 kgs/hour and legal payload up to 3,200 kgs makes this truck productive and profitable. The MDS-12 is not only a perfect inner-city shredding truck, it"s lower operating cost makes it an attractive option for entrepreneurs looking to ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
One of the most efficient ways to expand your shredding business to meet the constant demands of the document destruction industry is to acquire the Shred-Tech® MDS-2S-33 Shred Truck for your fleet. Engineered with a 33,000 lb. GVW chassis, this easy-to-maneuver vehicle allows you to take your business through congested city streets, and with a legal payload of 14,000 lbs., you can spend more ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 9000 commercial/industrial pressure washer appears similar in appearance to the 7000 steam pressure washers, but offers higher pressure and operates on 220-240v / single phrase/ ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
High tack lubricant that penetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Automatically re-coats gear teeth with each revolution of the mechanism. Contains high wear-resistance additives to prevent viscosity breakdown and spin-off. Unique dual spray valve - pencil spray for those hard-to-reach areas or fan spray for laying down a film. Used by ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Shred-Tech’s most versatile and efficient Paper Collection Truck. The Select Series is designed to be used in conjunction with a shredding plant, or a satellite facility where paper is consolidated for transfer. Paper can be bulk loaded onto the walking floor; an ideal configuration for unloading directly onto a conveyor or ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 7000 is a rugged and durable wet steam pressure washer. Built to last and appropriate for countless applications. The tremendous heat and low flow rate allows for incredibly efficient cleaning/degreasing while keeping water consumption to a minimum. ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 6000 is one of the lowest pressure models in Daimer's line of heavy-duty, wet steam, industrial pressure washers. It is designed to powerfully clean and remove grease and grime with minimal water ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The compact MDS-1-UK/EU model was designed with urban cities such as London, Dublin and Amsterdam in mind. Its maneouverability combined with a throughput of up to 2,041 kgs/hour and legal payload up to 3,200 kgs makes this truck productive and profitable. The MDS-1-UK/EU is not only a perfect inner-city shredding truck, it’s lower operating cost makes it an attractive option for ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
You can effectively improve the performance of your shredding fleet and generate higher revenue through the acquisition of the high-quality MDS-2S-58 Shred Truck developed and engineered by Shred-Tech® experts. With the help of this truck, you have access to optimized data destruction capabilities, allowing you to scale and grow your enterprise without interrupting workflow. Offering you one ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDS-26GTX is the perfect addition to your existing fleet or a great way to start your Mobile Shredding business. The MDS-26GTX is the perfect blend of high performance and compact design. It is very maneuverable and easy to navigate through congested city streets; yet still carries surprising 9,000 lbs ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDS-1S shredding truck has a payload of up to 14,000 lbs and throughput of up to 5,500 lbs/hr, taking affordability to an all new level. The MDS-2S is the perfect addition to your existing fleet or a great way to start your Mobile Shredding business. The MDS-2S is the perfect blend of high performance and compact design. It is very maneuverable and easy to navigate through congested city ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you