Only show results available in Virginia? Ok

Waste Containers Applications

  • Premium

    Odor control for municipal and government

    Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Industrial Weighing - Product Inspection - Contaminant Detection

    It is important to consider the type of likely contaminants, characteristics of the packaging used and the critical control points within production and packaging process to select the most appropriate contamination detection technology.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine production in Europe alone. As a result of this, yearly waste outputs contain around 1200 tons of mercury, which are stored on-site or sent off for disposal.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Water treatment solutions for paper and pulp industry

    Partner to the paper industry. ProMinent provides reliable metering components and systems for the production of paper, rounded off by the application knowledge of ProMinent engineers.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Metal Sorting - Non Ferrous Metals Sorting

    Modern sensor-based sorting systems are superior to traditional manual or sink-float processes for reasons including that they achieve material purities of up to 99.9% in refining the sorted fractions. TOMRA Sorting’s efficient sorting and recycling technology provides benefits for shredder machinery and heavy media operators, plus aluminum resmelters. Shredder operators can create individual fractions out of mixed product which yield much higher market values. Heavy media operators can produce and sell pure final products themselves, meaning their investment in technology is recouped quickly. After wet processing, the aluminum product still contains impurities and its concentration can be improved further using TITECH technology and sold for a considerably higher profit. For smelters, the TITECH x-tract [XRT] removes impurities in the secondary resource to such a high degree of precision that less primary resource is needed to obtain useful aluminum.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Waste Sorting - Bulky Waste Sorting

    TOMRA can help you sort the value out of Bulky waste. Bulky waste can contain a high number of valuable materials but this is not easily accessible within regular waste streams due to its bulkiness. This therefore means that in order to streamline the separation process, the initial treatment step has to involve shredding the input material. In order to prepare sortable fractions, sizing of fractions by screening and the separation of light by heavy compartments is inevitable.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Environmental dewatering solutions for mining and mineral processing

    TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention, filtrate quality and increase in solids consolidation within the tubes.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Waste Management Solutions for Metal Refining

    Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges, including:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your facilities and work closely with our customers to reduce the discharges to a minimum level is one of our main targets.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Peristaltic pumps and fluid path technologies for industrial sector

    Watson-Marlow products are engineered to meet the process needs of industrial fluid pumping in a broad range of industries. Watson-Marlow peristaltic pumps have no valves, seals or glands, and the fluid only comes into contact with the bore of the hose or tube ensuring that safe containment and no contamination of the pump or the process fluid.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Cardboard shredders for cardboard recycling

    Makes even the biggest mountains of cardboard into molehills! Every year, Germany produces around 10 million tonnes of cardboard and paperboard for the packaging industry. After their use, these items of cardboard packaging and boxes must then be reduced in volume before passing through the recycling process. This volume reduction step is performed by recycling companies and public recycling depots or in cardboard packaging and corrugated board factories.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Peristaltic pumps and fluid path technologies for chemical industry

    Watson-Marlow offers a wide range of tube materials to ensure chemical compatibility with your pumped fluid. Reliability and long life will yield production benefits and reduce maintenance costs year after year.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Shredding and baling for the glass/rock and mineral wool industry

    Complete waste handling installations containing conveyors,shredders and specialized balers for waste handling of waste matts of glasswool. Large size straight from production lines.

    By Valvan Baling Systems NV based in Menen, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you