waste production Articles
-
Well suited for dust and waste products from airlaid production
Less dust, easier handling and reduced transport costs. The RUNI Screw Compactor represents a great advance in airlaid production waste management. Dan-Web in Aarhus produces machinery and equipment for the manufacture of airlaid products such as nappies, sanitary towels, bed sheets and meat pads – primarily as turn-key production systems. The company has its own pilot system for client ...
By Runi A/S
-
7 Things You Should Know About SDS Management
It’s been some time already since the regulators have introduced the chemical inventory and SDS management requirement into the local legislation around the globe. Companies have kept hard copies of SDS sheets in registers in the past. These hard copies had to be continually replaced whenever a new or revised SDS appeared. Today, technology gives us the possibility to optimise this ...
-
Hazardous Waste Shredder Plant
Hazardous waste management is a challenging work, It is vital that the disposal of hazardous waste is both extremely safe and reliable. Shredding is an important step in hazardous waste management.AIShred manufacture hazardous waste shredders for hazardous waste shredding. Such as radioactive waste, steel drums containing hazardous materials or bacterially contaminated medical waste. Our ...
-
Dan-Web - Dust - Case Study
Well Suited for Dust and Waste Products from Airlaid Production Less dust, easier handling and reduced transport costs. The RUNI Screw Compactor represents a great advance in airlaid production waste management. Dan-Web in Aarhus produces machinery and equipment for the manufacture of airlaid products such as nappies, sanitary towels, bed sheets and meat pads – primarily as turn-key ...
By Runi A/S
-
Innovative fracture-resistant construction material from C&D waste aggregate, fly ash and recycled plastics
A laboratory investigation was conducted to evaluate the fracture behaviour of an alternative pavement foundation material containing cement stabilised reclaimed crushed aggregate, Class C fly ash and waste-plastic strip (high density polyethylene or HDPE) reinforcement. The primary objective of using strip reinforcement was to improve the tensile strength, crack resistance and toughness ...
-
E-waste vis-à-vis human health and environment
The social, economic and technological growth of a developing society has resulted in rapid product obsolescence which in turn has become a new environmental challenge – i.e., ‘electronics waste’ (e-waste). Electronic waste has not been a problem as long as there were a few computers or other electronic devices on earth. With the increasing use of computers/electronic devices, our planet has ...
-
Assist Gas Measurement in Flare Stacks
The Customer The company manufactures solvents, polymers and intermediary chemicals. These products are sold worldwide and are used in the production of automobile interiors, steering wheels, paints, tires, adhesives, furniture, cosmetics and many other consumer and industrial products. The Process The Company’s site is large, thousands of acres, and its production units are ...
-
Nutryfert: A Project Rewarded For Repurposing Organic Waste
In June 2019 Nutryfert received the “Food Chain Accesit” award at the SciencEkaitza Gala held in Baluarte, Spain. More than 1,500 participants gathered to attend the second edition of the science competition, organised by the technology company ADItech. The Government of Navarre is participating in this collaboration that rewards the most innovative ideas for transforming society and ...
-
EP Dust collections manufacturing case study
Client: Sodexo FM- Pilkington plc Location: Greengate Works, St Helens Date: Ongoing Sector: Manufacturing About the Project: GPT were contacted by the client following the set-up of a new manufacturing process on site. This resulted in the production of a new waste stream, the exact composition of which was unknown. The requirement was to remove large quantities of up to 13 tonnes of the waste ...
-
Separation leads to savings on waste charges
Separation and dewatering in connection with destruction of Tetra Pak cartons turned the waste dry enough for recycling. NEN-PRODUKTER AS in Norway produces juice and smoothies sold in various forms of Tetra Pak cartons. “We have to take care of thousands of units every day due to normal and unforeseen production waste. A major part of this waste contains filled cartons,” explains ...
By Runi A/S
-
Get the Best Roll-Off Construction Debris Containers in Bay City, Texas
One of the greatest challenges during a construction job is disposing of the waste that is produced in a manner that is friendly for the environment. When it comes to obtaining a debris container to hold the waste, you have a couple of different options. You can buy your own, or rent one. Oftentimes, owning your own container is a waste of money and space. It also requires that you be responsible ...
-
Ivey-Sol Technology has potential to increase oil recovery of oil-sands waste by 15-25 percent
Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...
-
Wheelie bins for municipal and industrial applications – The all purpose range of wheelie bins
A stronger focus on waste separation and recycling as well as the introduction of stricter guidelines have made the collection, transportation and sorting of household and industrial waste more complex for companies, municipalities and public service organisations. As one of the leading developers and manufacturers, Craemer offers a comprehensive portfolio of high quality wheelie bins for ...
By Craemer GmbH
-
Aluminium chips double their value in briquette form
Normal 0 21 false false false DE X-NONE X-NONE ...
-
Automating waste logistics in manufacturing - Sensoneo & Sigfox
Enabling “Just-in-Time” waste collection in production halls Automating route scheduling to minimize human tasks and drive efficiency Calculating the fastest routes on factory floor plans to collect only reported bins Sensoneo, the provider of enterprise-grade smart waste management solutions, has partnered with Sigfox Germany to introduce an end-to-end solution for monitoring ...
-
Biochemenergy: a project to turn an urban wastes treatment plant into biorefinery for the production of energy, chemicals and consumer's products with friendly environmental impact
Urban bio-wastes (UBW) contain soluble bio-organics (SBO) with excellent surfactant properties are proven or expected to perform as bio-based products for use in chemical and environmental technology, in agriculture and in animal husbandry as well as or better than commercial synthetic products. On these basis, UBW are proposed as renewable sources of a wide number of products with potential sale ...
-
Nen-Products - Beverage Cartons - Case Study
Separation Leads to Savings on Waste Charges Separation and dewatering in connection with destruction of Tetra Pak cartons turned the waste dry enough for recycling. NEN-PRODUKTER AS in Norway produces juice and smoothies sold in various forms of Tetra Pak cartons. “We have to take care of thousands of units every day due to normal and unforeseen production waste. A major part of this ...
By Runi A/S
-
How Applying Sorting Technology On The Municipal Waste Sorting Projects Might Be Beneficial
Just about the most best ways to assist the environment is always to recycle waste products. This can be everything from rubber tires to plastic containers. The recycling industry has exploded phenomenally within the last ten years. Portion of the growth concerns how easy it is actually to now convert these recyclables into products that could be sold. There may be a substantial amount of profit ...
-
The importance of wastewater treatment in shipbuilding industry
There is a huge amount of wastewater outcome during the ship production and repair processes in shipyards. Especially production processes (blasting, welding, painting, machining and metalworking), repair processes (hull washing) and painting processes (paint removal) create a huge amount of wastewater. In addition to these, open area processes of ship repair and maintenance cause stormwater ...
-
Adressing the conflicting priorities of waste reduction and energy development
Many valuable materials are currently being discarded rather than used productively, and more needs to be done to maximize the value we recover from material streams. Unfortunately, building energy recovery facilities to handle the existing waste load creates a requirement to continue generating the same amount of waste, creating potential problems for plans to reduce waste. Waste is the fuel for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you