Dust Containment (Waste Containers) Equipment
-
Manufactured by Laurin Containers Inc.based in CANADA
This container equipped with blast vent is designed to prevent the receiving container from bursting in the dust collector system in the event of a gas or dust explosion. The vent thus makes it possible to maintain the integrity of the container and avoid projections. A blast vent is an initially sealed orifice ...
-
Manufactured by Duscovent Engineering Limitedbased in UNITED KINGDOM
The Duscovent DUSMATIC is a compact, self-contained industrial dust collector with fan, silencer and filter media which extracts, filters and collects industrial process dust and waste. The DUSMATIC auto shake clean filter houses high efficiency polyester media in a tapered envelope pocket arrangement complete with steel mesh inserts ...
-
Manufactured by Instal Filter SAbased in POLAND
A gap valve is a simple and reliable shutting-off device. It is designed to remove dusts from containers operating at sub-pressure without a decompression risk. It is the most frequently applied by us e.g. beneath mechanical dust extracting units, cyclo-filters and bag filters. Basic element of a gap valve IF150 is a replaceable rubber ...
-
Manufactured by Pentek Inc.based in USA
The Compact Vac is designed to support one shrouded power tool approximately ten feet away from the vacuum system. The Compact Vac utilizes an air venturi design powered by a compressor, eliminating moving parts and motors which may burn ...
-
Manufactured by Nuova Idropress S.p.Abased in ITALY
For internal scraps and eps waste collected outside Allowing to re-use the material (thanks to a proper treatment) in a profitable ...
-
Manufactured by Arslan Damper Makine San. Tic. Ltd. Sti.based in TURKEY
Body: Floor is made of minimum 4 mm. thickness ST52 steel sheet. Side walls are made of minimum 4 mm. thickness ST52 steel sheet. The shape of the side walls are. outward slightly convex. The top of the body is made of minimum 4 mm. thickness ST52 steel sheet. The top and floor of the body will be strength with sufficient profiles. Front frame is made of minimum 4 mm. thickness ST52 steel ...
-
Manufactured by Arslan Damper Makine San. Tic. Ltd. Sti.based in TURKEY
Body: Floor is made of minimum 3 mm. thickness ST52 steel sheet. Side walls are made of minimum 4 mm. thickness ST52 steel sheet. The shape of the side walls are outward slightly convex. The top of the body is made of minimum 3 mm. thickness ST52 steel sheet. The top and floor of the body will be strength with sufficient profiles. Front frame is made of minimum 4 mm. thickness ST52 steel sheet, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you