Waste Containment Applications available in Latin America
-
Premium
Determination of mercury in mercury-containing wastes
INTRODUCTION Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Dredging solutions for Industrial Sector
Dredges. Our domestic and international industrial customers call their waste containment areas by different names: sump, pond, lagoon, tank, pit, basin, or channel. The problem is always the same – i.e., settled waste must be removed to comply with state and federal ...
By SRS Crisafulli, Inc. based in Glendive, MONTANA (USA).
-
Premium
Waste Disposal System for Rubber Tires
Waste tires are called black pollution. The accumulation of a large number of waste tires not only occupies the land but also seriously damages the environment. Because waste tires are not biodegradable, the decomposition time of tires is uncertain. At the same time, waste tires contain elements such as lead, chromium, cadmium and other heavy metals, which can pose a threat to human health and the environment if be handled and managed improperly. Long-term stacking of waste tires in the open air will not only ...
By Harden Machinery Ltd. based in Zhongshan City, CHINA.
-
Premium
TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Commercial and Industrial Waste, Plastics
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
By Tana Oy based in Jyvaskyla, FINLAND.
-
Premium
TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Side streams: Mattresses
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
By Tana Oy based in Jyvaskyla, FINLAND.
-
Premium
Wastewater treatment for the milk industry
Waste water containing fat and oils, generated from the cleaning of equipment and installations and from the sterilization process. Our equipment can be adapted to the highest loads produced by the whey's ...
By Toro Equipment S.L. based in La Cisterniga, SPAIN.
-
Premium
Technologies for Wastewater Treatment in Breweries
The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 ֺmg / l) as long as the waste contains sugars or ...
By Fluence Corporation based in White Plains, NEW YORK (USA).
-
Premium
Monitoring of mercury in mercury-containing waste
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Evaporators and concentrators for painting
Wastewater from painting booths, pre-washing waste stream, washing ...
By Eco-Techno SRL. based in Busnago MB, ITALY.
-
Vacuum systems in city centres
Waste handling operatives face many challenges in city centres. Traffic jams, a lack of space and lots of people. At the same time, ensuring a clean, tidy city environment is becoming an ever more important competitive advantage for city brands. The Envac vacuum system for waste handling results in considerably cleaner ...
By Envac AB based in Stockholm, SWEDEN.
-
Biological wastewater processes for mining
The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is ...
By Biowater Technology AS based in Tonsberg, NORWAY.
-
Liquid/solid separation equipment for steel and manufacturing
Coke Wastewater Treatment: Heating coal over 1100 Co in the absence of oxygen produces metallurgical coke. This process provides both heat and carbon (coke) required for iron production. During this process the volatile materials contained in the coal are driven off, leaving coke as the product. Gas produced by coking is withdrawn by means of blowers to recover energy-rich byproducts, including methane. Ammonia stills are the principal means of recovery. Recycled scrubber water is used as a coolant. Scrubber waste ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Hazardous waste treatment solutions for chlorine industry
The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Hazardous waste treatment solutions for oil and gas industry
There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Waste Management Solutions for Metal Manufacturing Industry
There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Waste Conversion System for Pathogens in Waste
Waste containing infectious agents must be decontaminated in a number of regulated situations, such as if it is generated in a hospital setting or if it's garbage being fed to swine (yes, you read that correctly). Yet waste is essentially exempt from these requirements if it is classified as garbage but headed to the landfill. Of course, it is well known that infectious substances are prevalent in garbage, hence the regulations in so many specific situations. Pathogens can be present in food waste, diapers, ...
By Ecogensus LLC based in Hartford, CONNECTICUT (USA).
-
Waste recycling solutions for construction & demolition industry
Construction and Demolition (C&D) waste consists of debris generated during the construction, renovation and demolition of buildings, roads, and bridges. This means that a C&D waste stream contains a high percentage of bricks, concrete and ...
By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.
-
Recycling solution for municipal solid waste sector
Municipal Solid Waste (MSW), or household waste, consists of discarded everyday consumable items. This general waste is normally put into a black bag or bin and contains a mixture of wet and dry recyclables, organic, inorganic and biodegradable materials, including food waste, containers, cans, cartons, product packaging, newspapers and card. As one of the world’s leading system integrators, Bollegraaf knows what it takes to separate MSW into valuable recyclables on the one hand and high-quality RDF (Refuse ...
By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.
-
Shredding solutions for computer hard disks
Computer hard disks are one of the electrical and electronic equipment waste largest category, commonly called WEEE. Several regulations govern the disposal of this type of waste, which contains several rare metals that can be recovered and ...
By SatrindTech Srl based in Arluno, ITALY.
-
HDPE Liners for Water Containment Application
HDPE liners are the widely used geomembrane products and the essential lining system for the efficient use of water resources due to their features of lowest permeability, excellent anti-seepage and ultra stress crack capacity. Water containment facilities like storage reservoirs, artificial lake and canals need reliable and durable protection from leakage because seepage is the main factors causing water loss. For the strongest preservation of the natural water, BPM offers a wide selection of geomembranes such ...
By Best Project Material Co., Ltd (BPM) based in Taian City, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you