Waste Destruction Articles

  • High quality recycling at small quantities - Case Study

    Recycling areas: Cable Company name: Hierros y Metales Díez Located: Zaragoza, Spain Founded: 1950 Employees: 30 Hierros y Metales Díez is active with a number of products and services within industrial waste management – e.g. waste collection and ...


    By Eldan Recycling A/S

  • Industrial and commercial waste, ST-25E, Ontario, Canada - Case Study

    ST-25E shredding bagged plant waste for destruction and reduction. Shredded material is discharged into a compactor container via conveyor thru the ...


    By Shred-Tech Corp.

  • Eco-Cycle Efficient Incinerators

    The EcoCycle badge is an accumulation of energy efficient technologies developed by Addfield, which allows us to create some of the most fuel efficient and eco friendly incinerator and cremator machines on the market today. The technology incorporates: 180mm-221mm of refractory wall thickness that retains the incinerator heat inside the machine and ...

  • High Capacity incineration plant supports plastic waste management in remote locations - Case Study

    The best solution for dealing with plastic waste The Ascension Islands, a remote volcanic island located just south of the equator. Having no permanent residents yet a rotating population of approximately 800 people. Managing waste securely has become a growing issue previously managed by being burned in an open heap with any residue that didn’t burn sent away to landfill. ...

  • National Environment Management Authority (NEMA) compliant medical waste incinerators in Kenya - Case Study

    Providing advanced solutions to treating Medical Waste whilst complying with all government environmental regulations. The correct solution for treating Kenyas' medical waste Ensuring all international emissions guidelines are adhered to is essential for safe destruction of Medical waste. We recently completed the commissioning of two of our Medical Incinerators ...

  • The truth behind Autoclaves for medical waste incineration

    In the destruction of medical waste, it is widely understood that the safest way to reliably and permanently destroy hazardous pathogens and germs is with heat. As manufacturers of the worlds most trusted range of medical incinerators, we are more than well aware of the risks and benefits associated with handling medical waste. ...

  • Destruction of ozone depleting substances - Case study

    Destruction of ODSs ODSs are substances that cause the depletion of the ozone layer. Depletion is typically caused by the photo-dissociation of halocarbons and catalytic destruction of ozone by the resulting atomic halogens. The majority of these halocarbons are man-made and have such serious affects to the ozone requiring control synchronized by the Montreal Protocol. ...

  • Destruction of persistent organic pollutants - Case study

    Destruction of POPs POPs are molecules that persist in the environment due to their low degradability due to natural processes, and their characteristic of bio-accumulation. Due to their persistence, the bio-accumulation of these molecules over long periods of time causes hazardous effects on flora and fauna, and through the food chain, on human health. ...

  • Medical Waste Destruction (HIV) - Case Study

    Location: Zimbabwe, Africa Client: Ministry of Health & Childcare Waste Type: Medical Waste & Bio-hazards Incinerator Supplied: 2 x i8-250 Models Incineration used in fight against HIV in Zimbabwe The prevention of HIV in the poorest regions of Africa has been an ...


    By Inciner8 Limited

  • Eco-innovation success project - Case Study

    SCFI was awarded funding under the EU’s Eco-innovation initiative to develop commercial opportunities for AquaCritox including the creation of a demonstrator unit which will help to position the technology at the forefront of the global waste treatment industry. ...


    By SCFI Group Limited

  • LIFE+ Lo2x Project - Case Study

    The European Commission’s LIFE+ programme has funded a project to install a sustainable technology for resource recovery from waste treatment – using hydrothermal oxidation (HTO) – at a wastewater treatment facility in Valencia, Spain. ...


    By SCFI Group Limited

  • Making wet waste destruction a sustainable reality

    Irish environmental company SCFI was supported by the European Union’s Eco-Innovation initiative in a project to build a portable unit to demonstrate its innovative AquaCritox wet waste treatment technology. This White Paper describes the science behind hydrothermal oxidation (HTO) as a waste treatment methodology and its potential across a range of industrial applications, which is now, ...


    By SCFI Group Limited

  • Waste Heat as a benefit of VOC Destruction with a Thermal Oxidiser - Case Study

    Application Although many look at the energy used to destruct VOCs as an unnecessary waste, Dickinson Legg (now Garbuio Dickinson), the world leader in the design and manufacture of Primary Tobacco Processing Plants saw it as an opportune way to supplement the heat required in their client’s tobacco refining process – in very different ways. Garbuio Dickinson chose ...

  • Resolving a sticky problem for the dog’s home

    It is a subject that virtually no one ever considers.  Yet if you do happen to think about it, a huge charity undertaking such as our latest customer – Manchester Dog’s Home – has a never-ending cycle of organic kennel waste that needs to be effectively and hygienically disposed of on a continuous daily basis.  When they came to us for advice and assistance we were ...

  • What a year – 2017 highlights and a look at what’s next!

    As 2017 draws to a close, UNTHA UK’s managing director Marcus Brew reflects on another massive year for the company before offering a sneaky peek into what’s coming up in the 12 months ahead… “12 months is a long time in any business, let alone one changing as quickly as ours. So, I hope all of our clients, partners and suppliers can look back fondly on 2017, proud of ...


    By UNTHA UK LTD

  • The Real Cost of Landfill

    In the western world we are focused on the reduction of landfill and replacing it with a more holistic approach to waste management.  This includes a mix of recycling, re-using and general reduction. However there is still a need ...


    By Inciner8 Limited

  • Nigeria Receives Incinerator from Private Donor

    WHO has stated recently that over 15% of all medical waste that is disposed of through incineration is done in poor quality machines that are releasing harmful pollutants into the atmosphere. Inciner8 have been supplied medical waste solutions to Nigeria since 2013 to address this problem. The model in use in this ...


    By Inciner8 Limited

  • Bespoke Incinerator Solution Shipped to Caribbean

    Our Agent in Bonaire identified a need for a high volume / high capacity incineration solution for the islands general and municipal waste needs. For this to make areal difference it needed to be able to process up to ...


    By Inciner8 Limited

  • What are the types of incinerators available?

    Incineration is a viable alternative to Landfill. An incinerator can destroy and remove at least 99.99 percent of each harmful chemical in the waste it processes. When some extremely harmful chemicals are present, EPA requires that an ...


    By Inciner8 Limited

  • Manufacturing Today Profile leading Incineration Company

    A fascinating insight into the growth and future plans of Inciner8. Vince Ferguson talks about how the business grew from humble beginnings and how it is now a Double Queen’s Award Winner in 2016. ...


    By Inciner8 Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you