Waste Gasification Articles

  • Case Study: New Tennessee Waste-To-Energy Plant

    Clean Conversion Infrastructure Addition To Give Lebanon Renewable Energy PHG Energy will provide the vibrant and growing Middle Tennessee city of Lebanon with a new method of sustainable waste disposal and renewable energy production when this system is completed in 2016. Commercial wood waste that was previously dumped into in area landfills, hundreds of tons of scrap tires, and ...


  • Case study - ElectraTherm green machines generate electricity from wood waste at mill in Oregon

    ElectraTherm commissioned its second Green Machine at an integrated wood products mill in Wallowa, Oregon. Together, the two machines operate off the waste heat of a biomass boiler to generate emission-free electricity. Integrated Biomass Resources (IBR) processes small-diameter timber into various wood products, such as firewood and fence posts. Wallowa Resources Community Solutions, Inc. ...


    By ElectraTherm

  • Gasification: An Investment In Our energy Future - White Paper

    One of the most compelling challenges of the 21st Century is finding a way to meet national and global energy needs while minimizing the impact on the environment. There is extensive debate surrounding this issue, but there are certain areas of consensus: We need to produce cleaner energy, both from conventional fuel sources and alternative technologies.  Any energy source must be ...

  • Waste Wood Case History

    The Customer The Company is a leader in the development and implementation of state of the art timber gasification. The Process The Company uses a gasification process that breaks down different types of waste wood such as wood chips, pallets, sawdust and other non-virgin wood and converts it into a clean producer gas. The producer gas fuels the turbine ...

  • Gasification - The Waste-To-Energy Solution

    Introduction Each year, Americans generate about 250 million tons of Municipal Solid Waste, or MSW—about 4.3 pounds per person per day. This includes “trash” such as kitchen waste, electronics, light bulbs, plastics, used tires and old paint, and yard waste. Despite significant increases in recycling and energy recovery, only about one-third of the total MSW is ...

  • Air gasification of Malaysia agricultural waste in a fluidised bed gasifier

    Hydrogen production from agricultural waste has been investigated experimentally using a bench-scale fluidised bed gasifier with 60 mm diameter and 425 mm height. During the experiments, the fuel properties and the effects of operating parameters such as gasification temperatures (800?900?C), fluidisation ratio (2.0?3.33 m/s), static bed height (10?30 mm) and equivalence ratio (0.16?0.46) were ...


    By Inderscience Publishers

  • Solid waste gasification pollution abatement - Case study

    Catalytic Products International has partnered with a Gasification System Designer in the design and supply of a unique thermal oxidizer for use with a closed loop batch pyrolysis gasification system. The gasifier is engineered to create a clean combustible syngas from a broad spectrum of dissimilar carbonbased solids, liquids, and other feedstocks. The QUADRANT NR – SEVERE DUTY Thermal ...

  • Exergetic performance assessment of gasification and pyrolysis processes of pre-treated wood board wastes

    This paper investigates exergetic performance of gasification and pyrolysis processes and compares their exergy efficiencies, using the experimental data on a two-step process of thermo-chemical conversion of Wood Board (WB) wastes. The exergy values of biomass samples change from 17.49 MJ/kg to 24.57 MJ/kg, respectively. Hydrogen produced from pyrolysis step of gasification varies between 17 ...


    By Inderscience Publishers

  • Who Can Benefit from PWR`s Plasma Gasification? What are the Applications?

    Plasma Waste Recycling, Inc"s unique and patent-pending Plasma Arc Gasification process gasifies, rather than incinerates, waste into energy. Using a 100% oxygen free process and the extreme high temperatures created through a blend of tried-and-true technologies utilizing a non-incinerating plasma arc method, all types of waste can be broken down into three primary outputs. The majority of ...


  • Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application

    The purpose of this study was to establish a fuel process for an advanced power generation system in which hydrogen-rich synthesis gas, as the fuel for the molten carbonate fuel cell (MCFC), can be extracted from biomass via gasification and reforming technologies. Experiments on waste wood gasification were performed using a bench-scale gasification system. The main factors influencing hydrogen ...


    By Springer

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Research on gasification process of loose biomass material with oxygen-enriched air in fluidised bed gasifier

    Fluidised bed gasification technology with oxygen-enriched air suitable for gasifying loose biomass materials was developed. Gasification experiments with different biomass materials such as rice straw, rice hull, wheat straw, sawdust and municipal wastes, were carried out. The tests showed that biomass materials can be gasified continuously at a temperature between 600 and 750°C. The heating ...


    By Inderscience Publishers

  • Preliminary studies of lignocellulosics and waste fuels for fixed bed gasification

    This study was carried out to understand the decomposition behaviour of a range of biofuel and waste feedstock during gasification in a downdraft gasifier. A laboratory scale large sample thermogravimetric analyser (LSTA) is used which allows the data on burn-out characteristics of different fuel particles to be measured under agitated conditions. The conditions chosen simulate the combustion ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you