Only show results available in Virginia? Ok

Waste Handling Applications

  • Waste Handling Equipment for the Maritime Industry

    Delitek AS is a market leading manufacturer and supplier of stainless steel waste handling equipment for the maritime industry. Our headquarters is located in Norway and our products are distributed via a global network of highly experienced agents and distributors.

    By Delitek AS based in Alsvaag, NORWAY.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • EcoTex laundry systems for senior care

    Faced with soaring utility costs and the high risk of infection spread, senior care laundry facilities can benefit greatly with an EcoTex ozone system. With an EcoTex System in place, a laundry room can achieve superior disinfection, reducing energy consumption, increasing wash quality, extending linen life, and be environmentally green. An EcoTex Laundry System starts saving money and improving wash quality the moment it’s installed. Much of the savings stems from reducing wash temperatures from 180o F to 50o F and cutting a laundry’s operation from eight hours to six hours per day.

    By ClearWater Tech, LLC - part of Aquion, Inc. based in San Luis Obispo, CALIFORNIA (USA).

  • Premium

    Shredding of diapers with Mercodor shredding systems

    The shredding of diapers serves for the recycling of important raw materials. Since, generally, the raw materials become more and more scarce, it becomes increasingly important to recycle the raw materials as much as possible when handling these resources.  The Mercodor shredders are best suitable for shredding of diapers as well as for shredding of bandages and similar products.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Crushing of mixed construction waste with Mercodor crushing systems

    The crushing of construction waste serves for the recycling of important raw materials. With the Mercodor crushing machines, the crushing of edge strips, concrete fragments, bath material, but also the crushing of sealing material, carpet edge strips or styrofoam and wallpaper rest rolls is no problem. Since, generally, the raw materials become more and more scarce, it becomes increasingly important to recycle the raw materials as much as possible when handling these resources.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Harden Shredding Technology for Pulper Ropes

    Harden Shredding Technology for Pulper RopesHarden Industries Ltd. designs and manufactures a variety of high-capacity shredding solutions specially suited for paper shredding and pulp mill materials processing. With Harden’s low-speed, high-torque technologies, pulp and paper mills are able to increase overall mill efficiency by reducing waste volume and lowering fuel, storage and transportation/disposal costs. Paper & Pulp Mill Materials Processed Rag rope Baled corrugated (old corrugated containers) or old newsprint. Pulper waste Paper rolls/fiber cores Wire Slabs Pallets Packaging materials (shrink wrap, banding, etc.) Scrap raw fibers and wood Typical Shredding Applications 1. Pre-Incineration Shredding Shredded paper is easier to handle and meter-feed into an incinerator and burns more thoroughly and rapidly. 2. Fuel Preparation Shred in-plant waste into cost-effective boiler fuel 3. Bale Breaking or Preprocessing Shredding bales prior to pulping delivers consistently sized

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Waste handling for kitchens

    Wherever food is handled, waste is produced. Waste food creates hygiene risks no matter where it is transported or stored, and handling it is a time-consuming, non-profitable process. The Envac system does away with all manual handling and transport, and instead waste food is dealt with and turned into an important environmental resource.

    By Envac AB based in Stockholm, SWEDEN.

  • Premium

    Shredding and crushing systems for Food waste and handling of garbage and food waste

    Organic waste can become a problem anywhere where the disposal of waste occurs over a longer period. This challenge arises for example in the shipping industry. With Mercodor waste food shredders valuable space is saved and food protected from contamination. The processed food leftovers serve as the raw material for biodiesel production or are used for the production of green energy in the form of electricity and heat from biogas plants.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Peristaltic pumps and fluid path technologies for water and waste industry

    Watson-Marlow peristaltic pumps` simple, glandless, `straight-through` design, with no valves, vanes or impellers have clear advantages when handling viscous sludge with high-solid content.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Green waste handling in the office

    Large amounts of waste are produced in offices; and a lot of it is made up of paper and incinerable waste that should be recycled as far as possible. A vacuum system from Envac can be used to handle this waste easily, and at the same time it adds other value.

    By Envac AB based in Stockholm, SWEDEN.

  • Vacuum systems in historical city centres

    Waste handling operatives face many challenges in historical city centres. Modernisation has to take place with caution so as not to damage buildings or surroundings of cultural historical value. The Envac vacuum system for waste handling is particularly suited to such environments, as demonstrated by our many installations all over Europe.

    By Envac AB based in Stockholm, SWEDEN.

  • Waste handling in nursing homes

    Large amounts of hazardous waste and contaminated waste are handled at modern nursing homes, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Shopping Malls / Retail Shops

    Shopping malls and retail shops can create a large amount of waste. Most of this is packaging material such as plastic, paper and cardboard that has to be recycled. The installation of an Envac vacuum system can ensure that the handling of this waste becomes easier.

    By Envac AB based in Stockholm, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you