Waste Inertization Equipment For Waste And Recycling Available In Kosovo
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The DEVISE MBF is a mechanical micro-solids separator based on the ‘continuous band/tape- filtration’ principle that is used to remove solids from all kinds wastewater. This machine can remove organic and inorganic matter, such as food waste, tissue- paper, inert material, fat, grease, animal slaughter remains, fish-remains and other biodegradable suspended solids from a wide range of ...
-
Manufactured by FGM Srlbased in ITALY
The vertical scrubber with triple separate counter-current washing stage was created to reconcile in a single device the need to purify streams of air polluted by both dust and malodorous gases (deodorization). In fact, this equipment is equivalent to the sum of a Venturi Jet Scrubber, a separate two-stage Scrubber, all concentrated in a single equipment which will take up considerably less ...
-
Manufactured by Vazzoler s.r.l.based in ITALY
Vazzoler s.r.l. designs and manufactures electromagnetic equipments and permanent magnet deferrization equipments for the steelworks, foundries, coal mines, coal power plants and for the recycling sector, to pick up ferrous parts from the processing material (metal scraps, steelworks slags, foundry sand, coal, wooden scraps, glass scraps, plastic scraps, urban wastes, stones, inert and from the ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
Because they contain very little organics, a preheat exchanger downstream of the oxidizers is used to reduce fuel consumption by preheating the incoming fume stream. A Catalytic Oxidizer may be used if the organic level is fairly low and the fume stream is free from dust or any substance poisonous to the catalyst. An oxidizer for an inert based waste stream is no different from one for an air ...
-
Manufactured by EMO sasbased in FRANCE
The sand washer allows obtaining an inert waste, thus not releasing smells, and less expensive to treat. Inlet capacity sand / water : up to 126 m3/h. Maximum sand outtake : up to 1,5 m3/h. Output material containing less than 3 to 5% organic matters. Frame : stainless steel 304L or 316L. ...
-
Manufactured by Clean Waste Systems, LLCbased in USA
With a capacity of up to 1000 lbs. (453 kg) of medical waste processing per hour, the OMW-1000™ is optimal for larger hospitals and waste haulers requiring a safer, more efficient option for large scale medical waste ...
-
Manufactured by Bertin Medical Wastebased in FRANCE
The Sterilwave 440 is the ideal treatment solution for institutions producing a large quantity of biomedical waste, as it can treat 70kg/hour* with minimal operating ...
-
Manufactured by Stolzbased in FRANCE
Our sequencer is designed to control and monitor the pads and sleeves filters cleaning. The solenoid valves are inserted into the sequencer. This device is set according to the required use. The sequencers are fitted with a ΔP module, controlling the start-up and stop of the cleaning operation. This device saves air and improves ...
-
Manufactured by Eco Waste Solutionsbased in CANADA
Two Stage Process: 1st stage (Primary Chamber) burns waste and produces inert ash and combustible gases. 2nd stage Afterburner (Secondary Chamber) combusts the off- gases to eliminate smoke and minimize ...
-
Manufactured by Promeco SpAbased in ITALY
The densifier PROMECO (Promeco Extruder System) is the simple, easier and efficiency solution for plastic densify and agglomeration. The flexibility of the system can process different plastics as: Mix plastics as scraps, industrial & commercial and waste plastics. Plastics (PE, HDPE, EPS, PP, PVC as foil shredded, powder or ...
-
based in FINLAND
The EPSE precipitation technology is simple, fast and cost-efficient. The process is based on the EPSE Chemical and adjustment of pH. The advantages are low operational cost and low investment needs in infrastructure. In the mining industry low operational cost is important, because the volume of waste water of one mine can be as much as up to 300 000 m³/day. The EPSE treatment process is ...
-
Manufactured by Bertin Medical Wastebased in FRANCE
The Sterilwave 100 is particularly suited to medical facilities generating only small amounts of waste. This biomedical waste management system can treat up to 20kg of waste per hour*. Sterilwave 100 is ultra-compact and comes in a mobile version, for use in a container for ...
-
Manufactured by Ecostar Srlbased in ITALY
The Ecostar screens optimize the performance of industrial shredders, transforming the processing line into a more effective, flexible, and efficient ...
-
Manufactured by Bertin Medical Wastebased in FRANCE
With a waste treatment capacity of 50 kg per hour, the Sterilwave 250 allows medium-sized institutions to treat their biomedical waste, guaranteeing safety and traceability at greatly reduced operating ...
-
Manufactured by Chemical Empoweringbased in SWITZERLAND
The plant, module of BIOZIMMI system, is designed specifically for the treatment of medical and / or hospital waste and has been designed to offer maximum production capacity thanks to a high level of ...
-
Manufactured by Clean Waste Systems, LLCbased in USA
The compact size of the OMW-400™ makes it ideal for an on-site installation in hospitals. It’s also suited for haulers interested in providing Regulated Medical Waste (RMW) services to their customers. Not using high energy and heat as with autoclaves and other technologies, installation is greatly simplified. The system treats up to 400 lbs. (181 kg) per hour. Using only ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you