Waste Management Systems Applications available in Peru
-
Waste Management Solutions for Mining Wastes
Mining waste typically arises from the limitation of the installed technologies of an operation, e.g. where fines cannot be tolerated. They are associated with mine workings and often contain valuable and/or hazardous materials. The hazardous content, which are often the valuable fractions within this waste are typically metals. Spread of metal toxicants in association with tailings particles, through a combination of wind dispersion or if washed into the soil or rivers, can have a highly damaging effect on the ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Waste recovery for organic wastes e.g. PCBs & Dioxins
Tetronics' technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Solids Control Centrifuges for Drilling Fluid Dewatering
Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, incorporating technology that also enhances the drilling process by ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Waste Management Solutions for Metal Refining
Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges, ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Waste Management Solutions for Metal Manufacturing Industry
There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Decanter centrifuge & cuttings for drilling waste management & disposal
Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud ...
By GN Decanter Centrifuge Ltd based in Hebei, CHINA.
-
Vertical Cuttings Dryers for Waste Solids Management
In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid, ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Waste management solutions for food waste industry
Waste management solutions for food waste ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste management solutions for PFAS industry
Waste management solutions for PFAS ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste management solutions for residuals & biosolids sector
Waste management solutions for residuals & biosolids ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste management solutions for defense industry
Waste management solutions for agricultural ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste management solutions for industrial wastes & sludges industry
Waste management solutions for industrial wastes & sludges ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste Technology Products for Schaefer Waste Industry
SSI SCHAEFER is the industry leader in waste technology products. Offering a wide range of residential, commercial, and specialty waste carts, we have been serving customers for over three decades. Learn how we can create a solution for your organization at ...
By SSI Schaefer Fritz Schaefer Gmbh based in Neunkirchen/Siegerland, GERMANY.
-
Plastics Identification Using ATR-FTIR Spectroscopy
Identifying different types of plastic to ensure efficient waste management is one tactic for reducing plastic pollution in our environment. In this application note, we discuss how the ATR-FTIR Spectroscopy using the IR5 can identify plastics for rapid ...
By Edinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM.
-
Waste management solutions for organic chemical & pharmaceutical industry
Waste management solutions for organic chemical & pharmaceutical ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Waste management solutions for oil and gans industry
Waste management solutions for oil and gans ...
By 374Water Inc. based in Durham, NORTH CAROLINA (USA).
-
Geosynthetics solutions for landfill and waste management structures sector
GeoSys India provides G'Mem-HP -a high performance HDPE geomembrane liner and G'Mem-LP - LDPE liners along with other components like drainage geonets, geocomposites, used extensively in construction of waste management landfills, engineered capping systems and other similar engineered projects. G'mem-HP contains waste and controls the movement of leachate and gases and serves the purpose of much required impermeable layer in both Hazardous waste landfill and MSW Landfill. Owing to its superior properties, it ...
By GeoSys India Infrastructures Pvt. Ltd. (GIIPL) based in Noida, INDIA.
-
Waste management solutions for hotel & restaurant sector
“Dwór Osmolice” is Hotel & Restaurant located in an exceptionally beautiful area. The property is surrounded by pure nature with a historic garden with direct access to the “Wieprz” River. There are fragrant fields and green meadows around the Manor. The omnipresent silence is broken with bird’s melody, crickets chirping and the rustle of trees. Important urban centers such as Ryki, Kock, Deblin and Pulawy are located within 30 km from the Manor. Social and business ...
By Metbud-Gonczyce Sp. z o.o. based in Sobolew, POLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you