We couldn't find any material recycling equipment suppliers or service providers located in Syria

Here is a list of equipment results with suppliers serving Syria

material recycling Equipment available in Syria

  • Scrap Material Recycling Technology

    Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

    By The David J. Joseph Company (DJJ) based in Cincinnati, OHIO (USA).

  • Premium

    Eldan - Model WST - Water Separation Table (System)

    The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Material Separation Product line

  • Premium

    Industrial Plastics Shredding

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Recycling & Shredding Applications Product line

  • Premium

    Valvan - Model V40 - Lift Single Box Vertical Baling Press Manual Feeding

    These  small and compact baling presses are suited to be placed in spaces with limited room.  In-between production lines, in store rooms or distribution centres . They are used to bale limited amounts of cardboard , plastic foils, yarn, textiles  and trim waste. Filling is done  manually using a secured loading  door at ...

    By Valvan Baling Systems NV based in Menen, BELGIUM. from Recycling Equipment - Vertical Press Product line

  • Premium

    Valvan - Model V15-V25 - Single Box Vertical Baling Press Manual Feeding

    These  small and compact baling presses are suited to be placed in spaces with limited room.  In-between production lines, in store rooms or distribution centres . They are used to bale limited amounts of cardboard , plastic foils, yarn, textiles  and trim waste. Filling is done  manually using a secured loading  door at ...

    By Valvan Baling Systems NV based in Menen, BELGIUM. from Recycling Equipment - Vertical Press Product line

  • Premium

    Guidetti - W.E.E.E. System (E-Waste Processing)

    The new W.E.E.E. System (E-Waste Processing) has been designed to recover metals coming from waste electrical and electronic equipment. Environmentally friendly, compact and innovative, it represents a big step towards pollution reduction thanks to the recovery of raw materials.

    By Guidetti Recycling S.r.l. based in Renazzo (FE), ITALY. from W.E.E.E. Recycling and CAR FLUFF Product line

  • Material Recovery Station

    The MODRoto Material Recovery Station automatically separates liquids from solids to allow both to be collected for recycling. This self-contained, solid-liquid separation system collects and accumulates a wide range of scrap, waste and recyclable materials using a proprietary screening panel that captures the solid particles while liquids are ...

    By MODRoto based in Madison, INDIANA (USA). from Recycling Product line

  • Premium

    ANDRITZ MeWa - Recycling Plants for Pulper Rags and Rejects

    Waste paper is usually delivered to paper mills in pressed bales held in shape by wires. The stock preparation process generates rags that comprise wires and other rejects. Rejects are all those materials that are not paper, such as plastics, textiles and metals. Depending on the requirements, ANDRITZ MeWa plants include several shredding stages ...

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY. from Andritz MEWA Recycling Plants Product line

  • Premium

    ANDRITZ MeWa - Recycling Plants for Automotive Parts

    Whenever metal is involved, the ANDRITZ MeWa technology can prove its strengths. Especially components from end-of-life vehicles (ELV), like tires, oil filters, catalytic converters and motor blocks, contain a variety of valuable raw materials for which ANDRITZ MeWa has developed pioneering solutions. Obtaining the rubber from used tires, the ...

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY. from Andritz MEWA Recycling Plants Product line

  • Premium

    ANDRITZ MeWa - Recycling Plants for Metal Composites / Special Solutions

    Whether it’s metal/plastic compounds, profiles and sheets from production left-overs, metal turnings and used beverage cans: ANDRITZ MeWa can provide the appropriate recycling technology for any application. The solutions are designed for use with metal recycling in mind, from the individual shredding machine to the complete recycling plant ...

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY. from Andritz MEWA Recycling Plants Product line

  • Model PMM - Multi-Material Baling Presses

    The PMM balers can be used to compact almost all compressible waste materials into high density bales. The two-ram baler PMM is a must-have tool for use in the recovery of secondary raw materials. In response to increasing material diversification to process and in order to develop new solutions for the waste-to energy processing, Copex, a solid ...

    By Copex based in Lanester, FRANCE. from Waste Recycling Product line

  • Model P-300 Series - Tilt Trucks Carts

    The Poly-Trux 300 Series tilt trucks handle up to 2,000 pounds of trash, scrap and recyclables and roll easily with ergonomically engineered designs. Our tilt trucks are in use all over the world as an integral part of recycling and waste management programs. Their rotationally molded, polyethylene construction withstands non-stop, punishing ...

    By MODRoto based in Madison, INDIANA (USA). from Recycling Product line

  • ERS - Material Recovery Facilities (MRF)

    ERS provides recycling systems that have been tried and proven for nearly 4 decades. Our goal to lead the industry is reason for continuously making improvements to existing equipment and developing new equipment to better handle the increasing market demands. ERS provides customized needs based solutions for our clients.  We have a complete ...

    By Eco Recovery Systems Inc based in St. George, UTAH (USA). from Recycling & Renewable Energy Product line

  • Signature - Model 100, 150, 200 and 300 - Recycling Baler

    Our premier recycling baler is the Signature Series baler. These rugged recycling balers are the latest in a long history of revolutionary and innovative recycling balers from Excel Manufacturing. Baler models 100, 150, 200 and 300 excel at fulfilling industry expectations for today’s recycling balers.

    By Excel Manufacturing based in St. Charles, MINNESOTA (USA). from Material Recovery Facility & General Recycling Baling Product line

  • Shaftless Screw Conveyors

    Shaftless spiral conveyors eliminate the central shaft and allow a much higher fill rate resulting in lower rpm’s, more efficient conveying and consequently less wear. Without a shaft, no intermediate or end bearings are required. The trough liner is the spiral’s replaceable bearing surface. The only machined bearings in a shaftless ...

    By Custom Conveyor Corporation (CCC) based in Rogers, MINNESOTA (USA). from Material Handling Product line

  • The Tiger - Compressor

    The Heger THE TIGER line uses innovative technology to compress bulky foam waste EPS (Styropor) extremely efficiently into easy to manage, stackable blocks – with no re-expansion. The extreme reduction in volume thus achieved (in the ratio of 40:1) does not only produce a considerable saving in transport and disposal costs, but the blocks ...

    By Heger GmbH & Co.KG based in Herrenberg, GERMANY. from Recycling Technology Product line

  • Waste Processing

    Shred-Tech custom designs and manufactures Waste Processing Systems for:hazardous wastes, medical wastes, municipal solid waste, industrial & commercial waste, construction & demolition debris.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Nexus - Model City 140 - Food Waste Housing Bin

    Nexus City 140 Food Waste Housingis available in a wide variety of configurations, customised to meet your individual needs.

    By Glasdon International Limited based in Blackpool, UNITED KINGDOM. from Recycling Bins Product line

  • Medical Waste Processing

    Shred-Tech’s Industrial Medical Waste Shredders have been installed in many hospitals and high volume commercial processing plants throughout the world. Slow speed, high torque shredders easily reduce the toughest medical grade materials ranging from fabrics to glass, plastics and stainless steel instruments and more. These machines reduce ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Computer & Electronic Hardware Recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic products once their useful life has been completed. End-of-life (EOL) legislation for electronics is in place in many countries and pending throughout Europe and North America. Shred-Tech has engineered and ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you