municipal waste treatment Equipment available in Missouri

Available in Missouri| Near Missouri
27 Results found

We couldn't find any municipal waste treatment equipment in Missouri

Here is a list of results available in Missouri

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: municipal waste treatment ×

  • Available in: USA ×

  • Available in: Missouri ×

Imabe Iberica - Transfer Stations for Solid Urban Waste (suw)

by IMABE IBERICA S.A.     based in Arganda del Rey, SPAIN

Transfer stations for solid urban waste (suw) have as main objective to improve the transport efficiency of the waste, generated in general from municipalities that are located far away from the waste treatment plants.

Keppel Seghers - Air-Cooled Grate

by Keppel Seghers     based in Willebroek, BELGIUM

Keppel Seghers Air-Cooled GrateOur air-cooled grate is ideally suited for thermal treatment of municipal and industrial waste of low to middle calorific values.

Mena Water - Reverse Osmosis System

by Mena Water     based in Sharjah, UNITED ARAB EMIRATES

We deliver RO Systems with high performance. Our pre-engineered systems allows fast delivery and are built with high-quality components designed to meet your specific process needs. RO process achieves rejection of 99.9% of salts, viruses & bacteria.

RWL Water - Model Tipton Series - Packaged Wastewater Treatment Plants

by RWL Water LLC     based in Minneapolis, MINNESOTA (USA)

RWL Water prefabricated packaged wastewater treatment plants provide complete solutions for on-site treatment.

Model WME-2724 - Microorganisms and Enzymes Blend for Grease Degradation & Pipeline Dredging

by Creative Enzymes     based in Shirley, NEW YORK (USA)

This product is a blend of bacteria and enzymes. The bacteria are natural, not genetically-engineered, specially used in the area of degrading oil and grease, which leads to a radical cure to the pipe blockage of kitchen, dining hall, hotel, restaurant, meat processing factory, etc. It is a natural and environment friendly high-tech biological ...

Sorting Lines and Material Recycling Facilities (MRF)

by IMABE IBERICA S.A.     based in Arganda del Rey, SPAIN

Waste sorting and treatment plants for waste processing, recovery of recyclables. IMABE design and manufacture tailor-made sorting plant according to the type and characteristics of residues and customer particular needs.

Partial Sludge Drying

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry solids content of approx. 20 - 25%, which is very suitable for thermal treatment in a ANDRITZ paddle dryer.

DY - Model NEP - Latest Design Belt Filter Press for Waste Sludge Treatment

by Doyen (China) Machinery Co., Ltd     based in Foshan, CHINA

During the process of water& wastewater treatment, sludge generation is an important and at times crucial issue to be addressed as inadequate sludge handling system can pose serious environmental implications.

BioCleaner - Water Cleaning Treatment Systems

by Biocleaner Inc.     based in Monterey Park, CALIFORNIA (USA)

BioCleaner’s breakthrough technology is able to treat all kinds of organic waste including residential, commercial, industrial and municipal sectors. It can be effectively used in natural waterways such as rivers, lakes and bays.Unlike other water cleaning treatment systems, BioCleaner constantly produces its own good microbes, eliminating ...

Plasco - Waste Conversion System

by Plasco Energy Group     based in Ottawa, ONTARIO (CANADA)

The waste conversion process begins with any materials with high reclamation value being removed from the waste stream and collected for recycling. Once these high value products are removed, the municipal solid waste (MSW) is shredded and any remaining materials are removed and sent for recycling.

STERIFLASH - The Biomedical Waste Management Solution

by COMTEM     based in Cocentaina, SPAIN

STERIFLASH is a device that treats potentially infectious biomedical waste and transforms it into ordinary waste which can be stored and treated in rubbish dumps. Robust and reliable, easy and quick to setup, this waste treatment process can now be set close to production place, avoiding risks & dangers.

STERI2FLASH - The Biomedical Waste Management Solution

by COMTEM     based in Cocentaina, SPAIN

STERI2FLASH is a device that treats potentially infectious biomedical waste and transforms it into ordinary waste which can be stored and treated in rubbish dumps. Robust and reliable, easy and quick to setup, this waste treatment process can now be set close to production place, avoiding risks & dangers.

GLES - Waste Conversion Pyrolysis System

by Greenlight Energy Solutions Corp.     based in San Francisco, CALIFORNIA (USA)

The Waste Conversion Pyrolysis System is well suited to handle various feedstocks.Pyrolysis of waste is the state-of-the art process providing destructive decomposition of waste materials in the absence of oxygen. Its combustion-free methodology allows us to eliminate residual and fly ash emission into the environment. GLES' leading edge design ...

GTS - Model Global Recycle Systems - Wastewater Treatment System

by GLOBAL Wastewater Treatment Systems, Inc.     based in Grand Island, NEBRASKA (USA)

The Global Re-cycle System is designed to meet the needs of customers that are unable to dispose of their wastewater by discharge or that are located in an area where discharge is not permitted.

Bag Opener

by Sistemas de Protección de Recursos, S.L. (SPR)     based in Barcelona, SPAIN

This machine is specifically designed to open and empty bags of all sizes in Municipal Waste Treatment Plants, and Packaging, Separation and Sorting Plants. The machine is able to open even the smallest bags without being aggressive with the material.

TECH - Model 100~400 - Techase Screw Type Filter Press

by Shanghai Techase Environment Protection Co., Ltd     based in Shanghai, CHINA

Techase® multi-plate screw press is a screw type sludge dehydrator, which features clogging-free, wide range of applications, low energy consumption, simple operation & maintenance. It has solved several technical problems of other similar sludge dewatering equipment have, which are frequent clogging, low concentration sludge / oil sludge ...

Model DDP - Belt Press

by BDP Industries     based in Greenwich, NEW YORK (USA)

The DDP is a high quality, easily maintained belt press designed for the under 1.5 MGD Waste Water Treatment Plant.

Screw Press

by Press Technology & Mfg., Inc.     based in Springfield, OHIO (USA)

Press Technology is a developer and manufacturer of cutting edge screw presses for pulp and paper, municipal waste and other industrial applications. A leader in new screw press design, Press Technology specializes in developing and manufacturing equipment tailored to meet customer requirements and demands.

Advanced Oxidation Processes System (AOP)

by AST Clean Water Technologies     based in M.P. MENASHE, ISRAEL

Advanced Oxidation Processes (AOP) refers to a set of chemical treatment procedures enhanced by Ultra sound and UV activation, designed to remove organic and inorganic materials in waste water.

TEFSA - Belt Filter Presses System

by TEFSA-Group     based in Esplugues de Llobregat, SPAIN

TEFSA Belt Filter Presses have been designed and developed by our engineers for over 30 years. We have had a significant influence on the market over this time thanks to our modern and innovative technology, our cost effective solutions to customer problems and the excellent outcomes that we deliver to our customers. Over 2,000 units have been ...

Need help finding the right suppliers?

Let the XPRTs do the work for you