We couldn't find any waste management program equipment suppliers or service providers located in Iceland

Here is a list of equipment results with suppliers serving Iceland

waste management program Equipment available in Iceland

  • Community Waste Applications

    We recommend that all communities establish a comprehensive solid waste management plan. Ideally, the plan will maximize resource recovery opportunities wherever possible. However, even the most sophisticated programs will require residual disposal. Thermal treatment reduces waste materials to ash that can be safely deposited in a landfill ...

    By Eco Waste Solutions based in Burlington, ONTARIO (CANADA). from Waste Applications Product line

  • Geotex - Model 401OR - Nonwoven Geotextiles for Environmental / Waste Management

    GEOTEX 401OR is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Typical Values when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is resistant to biological ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Stabilization Product line

  • Geotex - Model 651 - Nonwoven Geotextiles for Environmental / Waste Management

    GEOTEX 651 is a polypropylene, staple fiber, needlepunched nonwoven geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. The fibers are needled to form a stable network that retains dimensional stability relative to each other. The geotextile is ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Stabilization Product line

  • Geotex - Model 2130 - Nonwoven Geotextiles for Environmental / Waste Management

    GEOTEX 2130 is a 100% polypropylene woven flat tape; silt fence fabric produced by Propex, and will meet the AASHTO M-288 and ASTM D 4439 for silt fence and geotextile usage. This engineered fabric is stabilized to resist degradation due to ultraviolet exposure for a minimum of six months of the expected usable construction life at a temperature ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Stabilization Product line

  • Hydrasyst - Model Grey Box - Modular Waste Water Treatment System

    Hydrasyst is a turnkey solution provider of commercial waste water treatment systems, using varying sizes and types of membranes to treat water according to specific customer requirements. A complete consulting service is a key part of our business, offering initial and continuing support to our clients.

    By Hydrasyst based in Bundall, AUSTRALIA.

  • PyroPure - Non-Recyclable Waste Recycling Unit

    PyroPure is a technology that destroys all non-recyclable waste on site leaving only metal and glass for recycling. Imagine a bin that never fills, never smells and empties itself leaving no residue and creating no fumes. Using PyroPure has many environmental benefits; no need for waste collection, no need for landfill or incineration and less ...

    By PyroPure Ltd. based in Bordon, UNITED KINGDOM.

  • ENVIRO-PAK - Model R6 - Multi-Bin Recycling Compactor

    Our Model R6 multi-bin recycling compactor offers six large bins for sorting recyclables and compacting them separately as needed. This design is larger than our R44 model and allows for recycling for a higher number of persons on board (POB), and makes recycling easy to implement and easy to use. With six available bins, operators have the option ...

    By Tech Oil Products based in New Iberia, LOUISIANA (USA). from Multi-Bin Recycling Compactors Product line

  • ENVIRO-PAK - Model R44 - Multi-Bin Recycling Compactor

    Our Model R44 Rotating Bin recycling compactor is an excellent way to begin a recycling program on any vessel, workshop, or business. All operators should consider recycling as part of a complete offshore waste management plan. Utilizing a minimum amount of deck space, this compactor allows users to pre-sort the waste stream before compacting. ...

    By Tech Oil Products based in New Iberia, LOUISIANA (USA). from Multi-Bin Recycling Compactors Product line

  • Materials Recovery Facilities Operation

    The Company manages and operates a Materials Recovery Facility (MRF) in Ioannina, equipped with modern machinery for sorting, compressing, packaging and standardization of recyclable products. The processing capacity is of 100 tons per day and covers all packaging waste materials from the region of Epirus. The MRF’S where the collected waste ...

    By Spider Ν. Petsios & Sons S.A. based in Ioannina, GREECE. from Evnironmental Services Product line

  • Model P-300 Series - Tilt Trucks Carts

    The Poly-Trux 300 Series tilt trucks handle up to 2,000 pounds of trash, scrap and recyclables and roll easily with ergonomically engineered designs. Our tilt trucks are in use all over the world as an integral part of recycling and waste management programs. Their rotationally molded, polyethylene construction withstands non-stop, punishing ...

    By MODRoto based in Madison, INDIANA (USA). from Recycling Product line

  • San-i-pak - Sharps Machine

    The San-i-pak Sharps Machine comes in two versions, each having a different price. One system is designed to render sterilized sharps Unreusable and the other style renders sharpsunrecognizable. The units have been designed specifically for sharps materials, utilizing low speed, high torque cut

    By San-I-Pak Pacific, Inc. based in Tracy, CALIFORNIA (USA). from Other Product line

  • Standard Laundry Chute Doors

    WMS Ltd’s range of Standard Laundry Chute Doors are manufactured to an extramly high standard. They are an ultra modern design with weight assisted opening and closing. The finish is high grade powder coating. Wms Ltd’s Hoppers and chutes far exceed all relevant international safety requirements. Our customers can choose any colours ...

    By WM Specialists Ltd based in Woking. Surrey, UNITED KINGDOM. from Chute Product line

  • Interlocking Hopper Doors

    WMS Ltd's hopper doors with interlocks come as part of the Fully Automatic Cleaning System. They allow 1 door at a time to be opened as a health and safety feature. Also if the cleaning system is activated the doors will be locked off. The Intelocking hoppers are manufactured to the same high standard as all our equipment and the finish is high ...

    By WM Specialists Ltd based in Woking. Surrey, UNITED KINGDOM. from Chute Product line

  • Interlocking Laundry Chute Doors

    WMS Ltd’s range of Interlocking Laundry Chutes allow 1 door at a time to be opened as a health and safety feature. The Intelocking hoppers are manufactured to the same high standard as all our equipment and the finish is high grade powder coat as above.

    By WM Specialists Ltd based in Woking. Surrey, UNITED KINGDOM. from Chute Product line

  • Standard Hopper Doors

    WMS Ltd's ranges of standard hopper doors for refuse chutes are manufactured to an extremely high standard. They are an ultra modern design with weight assisted opening and closing. The finish is high-grade powder coating. WMS Ltd's Hoppers and chutes far exceed all relevant international safety requirements. Our customers can choose any colours ...

    By WM Specialists Ltd based in Woking. Surrey, UNITED KINGDOM. from Chute Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you