waste processing Equipment available in Belize

  • Premium

    UNTHA - Model XR3000 mobil-e - Mobile Electromechanical Shredding System for Efficient Waste Processing

    The new XR3000 mobil-e is a revolutionary machine concept in mobile waste shredding. It capitalises on many benefits of an electromechanical drive without having to forego the advantages of a mobile machine. This gives you maximum efficiency and flexibility.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA. from Industrial Shredders Product line

  • Waste Processing

    Shred-Tech custom designs and manufactures Waste Processing Systems for:hazardous wastes, medical wastes, municipal solid waste, industrial & commercial waste, construction & demolition debris.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Holo-Scru - Hazardous Waste Processing System

    Therma-Flite Holo-Scru desorption units are excellent for delisting RCRA waste. Drums, cans, glass and plastic containers are just some of the items that carry hydrocarbon-laden materials such as paint, perfume, degreaser, oil, resins, and hair spray.Such feed stock is typically shredded to 2-inch minus in order to add easily to the desorption ...

    By KMT International, Inc. based in Fremont, CALIFORNIA (USA). from Solid Oil Waste Treatment Product line

  • Medical Waste Processing

    Shred-Tech’s Industrial Medical Waste Shredders have been installed in many hospitals and high volume commercial processing plants throughout the world. Slow speed, high torque shredders easily reduce the toughest medical grade materials ranging from fabrics to glass, plastics and stainless steel instruments and more. These machines reduce ...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Premium

    Partial Sludge Drying

    Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry solids content of approx. 20 - 25%, which is very suitable for thermal treatment in a ANDRITZ paddle dryer.

    By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    EST Steam Heaters

    EST™ steam heaters can be used in any process that requires heating with steam. De Nora Water Technologies offers a variety of proven steam heater designs incorporating both direct contact units as well as shell & tube designs. Direct contact designs include tank steam heaters, used to inject steam directly into process ...

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA). from Industrial Process Product line

  • Premium

    TOMRA - Model FINDER - High Purity Metal Fractions Separator

    The FINDER is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY. from Waste and Metal Sorting Equipment Product line

  • Premium

    TOMRA - Model AUTOSORT - Multifunctional Sorting System

    The AUTOSORT is a multifunctional sorting system to recover a wide range of pieces of material from different waste streams, single stream, packaging, paper, household waste and other sorting tasks looking for enhanced material information and color in combination.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY. from Waste and Metal Sorting Equipment Product line

  • Phoenix - Waste Tire Processing Recycling Plant

    With the ever increasing health and environmental concerns, the disposal of waste tires is a growing problem all over the world. A waste tire processing plant recycles whole, car and truck tires into a valuable product called crumb rubber. This crumb rubber is then used in numerous applications including sport fields, rubberized asphalt for paving ...

    By Phoenix Industries, LLC based in North Las Vegas, NEVADA (USA). from Others Product line

  • Premium

    Land - Model FTI-Eb - Furnace Monitoring System

    Thermal Imaging for Continuous Process Monitoring and Quality Control. When thermal imaging inside refractory lined furnaces or boilers is required the plant operator is required to cut large openings in the refractory to enable viewing of the critical area. This can cause significant wasted energy from heat loss through the opening and can be ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Process Imaging Product line

  • Premium

    HidroMak - Hooklift

    Hooklift made for take on the truck and transport open or closed containers. According to DIN 30722 norm container tahe on the truck, locks with special lock mechanism and gets ready to transport. Hooklift loading precess, when the hooklift container is on ground, with opening lift arm in to the gip and with help of purchase, pulls the containers ...

    By HidroMak based in Bakirkoy / Istanbul, TURKEY. from Waste Management Product line

  • Premium

    TodaySure Matthews - Crushers and Conveyors

    For dense wastes such as wood or whole large animal carcasses, pre-treatment of the waste by crushing may be considered. Pre-treatment of this type of waste has several advantages. Large quantities of waste may be processed through the crusher and stored within a hopper irrespective of the incinerators availability

    By Todaysure Limited based in Hyde, UNITED KINGDOM. from Waste Loading Product line

  • Premium

    HidroMak - Skip Loader

    The Skip Loader design to carry containers of uncompactable solid waste has structure which extension arms, too, can be added to acoording to the need. Stabilazation legs (jacks) can be made horizontal or vertical depending on the load state. There are available on it, a total number of six hydraulic and pneumatic cyclinder for hook holding ...

    By HidroMak based in Bakirkoy / Istanbul, TURKEY. from Waste Management Product line

  • Waste Gas Catalysis

    Waste gas catalysis units make it possible to clean up contaminated areas, whose cleanup was not feasible in the past or proved to be too costly. Where the soil is contaminated with vinyl chloride, catalytic combustion plants are the only way to remove the pollutants. Before being heated up to the required reaction temperature by an electric ...

    By Harbauer GmbH based in Berlin, GERMANY. from Processes Product line

  • Construction and Demolition Waste

    Our C&D grinders offer the highest throughput rates for front end RDF production on the market. In-place density of C&D is very low and creates significant capacity issues in landfills. 38% or more of landfill composition can consist of C&D waste. This type of waste increases the risk of landfill cell rupture allowing leachate to ...

    By Eco Recovery Systems Inc based in St. George, UTAH (USA). from Waste Processing Product line

  • ERS - Green and Wood Waste Grinders

    Our grinders offer consistent material sizing and processing rates that are the highest in the industry! Whether you compost or produce reusable bi-products from green waste, you can depend on our grinders to increase production and keep your operation consistent.

    By Eco Recovery Systems Inc based in St. George, UTAH (USA). from Waste Processing Product line

  • Premium

    Enerpat - Model MSB Series - Hard Drive Shredder

    Enerpat design and produce the professional hard drive shredder for shredding hard drive into small pieces,The input material is processed and size reduced by the powerful hard drive shredding machine. If a smaller homogeneous particle size is required, then an ENERPAR twofour shafts shredder usually installed downstream.

    By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM. from Waste Shredders - Customized Shredders Product line

  • Premium

    Tecam - Incinerator System for Waste Management (Hazardous, Solid & Liquid, NORM, Sludge, etc.)

    Incinerators for Hazardous Waste, Solid Waste, Liquid Waste, NORM derived from industrial processes. Waste valorisation is a common and necessary practice to treat, recycle and give a new value to waste coming from human and industrial activity. Incineration is a type of valorisation that offers safe results and advantages, which make it ideal for ...

    By Tecam Group based in Llinars del Vallès, SPAIN. from Industrial Waste Management Product line

  • Premium

    Enerpat - Model AMB2525 - Automatic Scrap Metal Baler

    The automatic balers AMB Series are the best solution for scrap dealers but also for industries to directly manage the metal waste. These models are continuous-feed compacting balers, ideal to compact scrap metal from industrial processes: steel turnings, mixed scrap, tin cans, steel from recycled tires and so on. The Enerpat automatic balers ...

    By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM. from Waste Metal Balers - Automatic Balers Product line

  • VSS - Model KFVG 1000 - Standard Gas Scrubber

    VSS-Umwelttechnik offers suitable gas scrubber for almost all tasks of waste gas cleaning. The range extends from the individual gas scrubber to combinations which are individually adapted to local conditions and existing gas compositions. Our standard gas scrubber also wet scrubber function in accordance with the absorption principle. The program ...

    By VSS-Umwelttechnik GmbH based in Troisdorf, GERMANY. from Processes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you