waste regulation Equipment available in Syria

Available in Syria| Near Syria
57 Results found

We couldn't find any waste regulation equipment in Syria

Here is a list of results available in Syria

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: waste regulation ×

  • Available in: Asia & Middle East ×

  • Available in: Syria ×

Model K3 - Small Size Waste Packers

by COS.ECO. Costruzioni ecologiche s.r.l.     based in Grumo Appula(Bari), ITALY

The PICCOLO K3 solid waste compactor is an equipment designed for the collection of urban  solid and differentiated waste. The body is manufactured in full adherence to the EC Machine Directive , as prescribed by the UNI EN 1501-1 norm, presently in force, and in full respect of the Italian and the EC regulations, by means of faults free ...

SELECTIVE - Model K5/K6 - Medium Size Waste Packers

by COS.ECO. Costruzioni ecologiche s.r.l.     based in Grumo Appula(Bari), ITALY

The K5 and K6 SELECTIVE waste compactors are manufactured in full adherence to the EC Machine Directive, as prescribed by the UNI EN 1501-1 norm, presently in force, and in full respect of the Italian and the EC regulations, by means of faults free  materials and on the basis of a  manufacturing process involving quality controls during ...

Aerosol - Shredding Systems

by Meltog a Division of MMco. Limited     based in Leeds, UNITED KINGDOM

Meltog offers a number of pre-existing solutions for the safe destruction, management and sorting of aerosol cans for either indoor or outdoor operation and for either ODS or non ODS applications. All systems comply with ATEX regulations and they can be additionally adapted to comply with localised, specific environmental requirements or site ...

Model K5 - Medium Size Waste Packers

by COS.ECO. Costruzioni ecologiche s.r.l.     based in Grumo Appula(Bari), ITALY

The MEDIUM K5 solid waste compactor is an equipment designed for the collection of urban  solid and differentiated waste. The body is manufactured in full adherence to the EC Machine Directive , as prescribed by the UNI EN 1501-1 norm, presently in force, and in full respect of the Italian and the EC regulations, by means of faults free ...

Model PAWDS Land - Waste Streams System

by PyroGenesis Canada Inc.     based in Montreal, QUEBEC (CANADA)

Already the US Navy’s choice for the Gerald R. Ford Class of aircraft carriers, the Plasma Arc Waste Destruction System for Land (PAWDS-Land), being the world’s most compact, easy-to-operate, high temperature, plasma-based waste treatment system, is perfectly suited to meet the demands of remote communities and camps (mining, ...

Model SPARC - Waste Streams System

by PyroGenesis Canada Inc.     based in Montreal, QUEBEC (CANADA)

Evolving from our plasma platform developed for the US Military, SPARC is a highly effective, patented process for the complete destruction of ozone depleting substances and other environmentally noxious chemicals. SPARC is the latest innovation from our team of engineers, scientists and technicians. Refrigerants and other fluorinated chemicals ...

Clean Burn - Model CB-2500 - Waste Oil Furnace

by Clean Burn, LLC     based in Lancaster, PENNSYLVANIA (USA)

The larger of the two Clean Burn low profile models, the Model CB-2500 waste oil furnace produces approximately 250,000 BTU/hr and is extremely popular at facilities such as 2 to 4 bay auto repair and truck service shops. The CB-2500 is highly versatile and reliable and can be easily ceiling mounted or used in conjunction with a Clean Burn ...

MORTIM - Model 20 - Containerized waste management station

by Delitek AS     based in Alsvaag, NORWAY

MORTIM has been developed and designed for waste handling of larger amounts of solid waste in the Marine and Offshore Industries.

Clean Burn - Model 1750 - Waste Oil Furnace

by Clean Burn, LLC     based in Lancaster, PENNSYLVANIA (USA)

The Clean Burn Model CB-1750 produces approximately 175,000 BTU/hr. and is the smallest of the low profile designs, making it ideal for numerous applications and convenient installations. As a broad guideline, the Model CB-1750 is suitable for facilities generating smaller quantities of waste oil annually.

RBW - Model 2075 - Red Bag Waste Equipment

by WasteCare Corporation.     based in Gainesville, GEORGIA (US) (USA)

The innovative process uses heat sterilization (with steam & water) and then pulverizes red bag waste awesome return on investmen. Reduces cost of Red Bag Waste processing from around 30 cents per pound (typically) to a total processing cost of around 5 - 6 cents per pound (including processing costs and hauler weight & 'pull' ...

Coarse Screen

by Association of 3 Co., Ltd.     based in Bangkhuntien, THAILAND

WateRRake Model CS1 is designed and built for removal of large suspended solids. The mechanism is rugged and easy to operate. Grab carriage can run to the lowest position to sweeps up the trash which settled on the floor, thus the cleaning is so efficient. The cleaning is made possible by grab controlling through 3-cable motion. Two cables are ...

Model 120Ltr - Clinical Waste Bins

by BritishBins Ltd     based in London, UNITED KINGDOM

Yellow Clinical Waste Wheelie Bins With Regulation Lock and Approved Clinical Waste Symbol Sticker. 94cm High - 48cm Wide - 54.3cm Deep - Capacity 1-2 Bin Bags.

Multipocket Filter Bags

by Scottex Precision Textiles Ltd     based in Bury, UNITED KINGDOM

Multipocket type bags have the pockets joined together to give a large filter media surface area in a small space. Pockets are either shaken from the bottom (ie, DCE types) or from the top (i.e. Airmaster type).

Waste Labels

by The Compliance Center (ICC)     based in Niagara Falls, NEW YORK (USA)

ICC's selection of waste labels include: hazardous waste labels, non-hazardous waste labels, non-regulated waste labels, used oil labels, empty container labels, solid waste labels, special waste labels and universal waste labels.

Waste Loading Transfer Stations

by PRESTO GmbH & Co KG     based in Bad Laer, GERMANY

PRESTO transfer stations are employed wherever large volumes of waste must be transported across long distances. In addition, legal regulations call for the closure of more and more landfill sites. The result is: Residual waste and recyclables must be hauled across long distances to the closest treatment plants or recycling systems. The relatively ...

GN SOLIDS CONTROL - Drilling Waste Management

by GN SOLIDS CONTROL     based in Langfang, CHINA

GN Vertical Cutting Dryer is one of the popular products for OBM and SBM.As the developing for the evironment regulations,the drilling waste management has become more and more import.As an international famous brand for solids control,GN has been developping products suiting for drilling waste management.Up to March,2012, GN Solids Control is the ...

AMB Ecosteryl - Model Serial 125 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 175 kg/hr (385 lbs/hr)• Volume capacity : approx. 2100 L• Length: 10m• Width : 3.5m• Height : 5.2m• Weight : 10 tons• Required floor space : 6 x 12m• Minimum ceiling height : 6m• Electric power consumption : 60 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1200 tons• Electrical ...

AMB Ecosteryl - Model Serial 250 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 300 kg/hr (660 lbs/hr)• Volume capacity : approx. 3600 L• Length: 12m• Width : 3.5m• Height : 5.2m• Weight : 12 tons• Required floor space : 6 x 15m• Minimum ceiling height : 6m• Electric power consumption : 80 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1500 tons• Electrical ...

Waste Management Centrifuge

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers ...

Plasco - Waste Conversion System

by Plasco Energy Group     based in Ottawa, ONTARIO (CANADA)

The waste conversion process begins with any materials with high reclamation value being removed from the waste stream and collected for recycling. Once these high value products are removed, the municipal solid waste (MSW) is shredded and any remaining materials are removed and sent for recycling.

Need help finding the right suppliers?

Let the XPRTs do the work for you