We couldn't find any waste site equipment suppliers or service providers located in Lesotho

Here is a list of equipment results with suppliers serving Lesotho

waste site Equipment available in Lesotho

  • Premium

    Skim-pak - Model 11840-DH - Flow - Control and Floating Decanter Systems

    The 11840-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11840-DH has 4 meters of total weir, and therefore is normally operated at a flow rate 11.2 m3/min, 2958gal/ min. Maximin flow rate is 4,000gpm. The 11840-DH excludes solid during the aeration ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Water & Waste Water Product line

  • Premium

    Skim-pak - Model 11800-DH - Flow - Control and Floating Decanter Systems

    The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Water & Waste Water Product line

  • Premium

    Tidy Planet DEHYDRA - Maxi Bulk Food Waste Dewatering System

    Tidy Planets unique Maxi food waste macerator has the ability to process bulk loads of food wastes in timely 3 minute, 90 litre batches. The all stainless steel Maxi incorporates a large loading hopper with an automatic screw feed auger system, which drives the food into an inbuilt macerating system. This revolutionary new design allows the ...

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM. from Dehydra Food Waste Dewaterer Product line

  • CoWaste - Model SW - Remediation Cover

    CoWaste SW is easy to apply and guarantees long-term effectiveness. CoWaste SW is a technologically advanced sprayable foam of polymers and recycled fiber that forms a slurry when mixed with water. The slurry can be spray applied to smooth or irregular surfaces, steep slopes or vertical walls. CoWaste SW Foam Cover forms an uniform encapsulating ...

    By Full Service Srl based in Saletto, ITALY. from Contaminated Sites Product line

  • Premium

    Tidy Planet GOBI - Model G3000 and G5000 - Food Waste Dryers

    These automated systems dry food and other organic waste by the use of heat and mechanical mixing. As organic and food wastes have a high moisture content (up to 98%), the weight and volume reduction is achieved through the evaporation of the water, leaving the operator with a dry, manageable end product that has been sterilised and stabilised so ...

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM. from Gobi Food Waste & Packaged Food Dryer Product line

  • BiOWiSH-Odor - Environmentally Friendly & Non-Toxic Waste Treatment

    BiOWiSH-Odor rapidly reduces odors in landfill sites and composting facilities.

    By BiOWiSH Technologies based in Cincinnati, OHIO (USA). from Waste Management Product line

  • Moving-Base Mat Conveyor for Transferring Waste

    The effectiveness without the constraints. This type of box used to store and transfer products collection in a trailer. The set consists of a mat type background moving body with chains and bars on which collection vehicles (BOM) come to unload the product. The product is then transferred to the semi-trailer.

    By Legras Industries based in Epernay Cedex, FRANCE. from Waste Transfer Product line

  • Aerosol - Shredding Systems

    Meltog offers a number of pre-existing solutions for the safe destruction, management and sorting of aerosol cans for either indoor or outdoor operation and for either ODS or non ODS applications. All systems comply with ATEX regulations and they can be additionally adapted to comply with localised, specific environmental requirements or site ...

    By Meltog a Division of MMco. Limited based in Leeds, UNITED KINGDOM. from Waste Management Equipment Product line

  • Model PAGV - Waste Streams System

    As the forerunner for our game-changing PRRS waste-to-energy technology, the Plasma Arc Gasification and Vitrification (PAGV) system eliminates future legacy issues for operators of incinerators with a simple process for inerting their grate and fly ash and turning it into a useful construction material. Municipalities, along with managers of ...

    By PyroGenesis Canada Inc. based in Montreal, QUEBEC (CANADA). from Plasma Waste Processes Product line

  • TANA Shark - Waste Shredders

    Pre-shredder and secondary shredder in one package: There are some undisputed features which differentiate the TANA Shark slow speed shredders from other equivalent equipment available. Versatility is the key word in design as special attention has been paid to the machine's capability to shred most materials and produce a wide range of particle ...

    By Tana Oy based in Jyväskylä, FINLAND.

  • Waste Loading Transfer Stations

    PRESTO transfer stations are employed wherever large volumes of waste must be transported across long distances. In addition, legal regulations call for the closure of more and more landfill sites. The result is: Residual waste and recyclables must be hauled across long distances to the closest treatment plants or recycling systems. The relatively ...

    By PRESTO GmbH & Co KG based in Bad Laer, GERMANY. from Transfer and Shifting Stations Product line

  • Street Waste and Recycling Container

    With an increasing focus on the appearance of open spaces in parks, new housing developments and a drive to remove unsightly on street waste and recycling containers, we have created a compact and cost-effective container housing for Continental 1100 or 1280 litre containers. Taylor Street is perfect for high footfall areas and high density ...

    By Egbert H. Taylor & Co. Ltd based in Elmley Lovett, UNITED KINGDOM. from Urban Solutions Product line

  • Premium

    Bergmann - Model PS 800 (800 Litre Capacity) - Roto Compactor

    The Roto-Compactor, invented by BERGMANN, are THE alternatives for an efficient and CONTINUOUS waste collection directly at the collection site. For over 20 years, they have been contributing to minimising the cost of waste handling with the highest compaction rates.

    By Bergmann, Heinz, e.Kfm.- Machines for Waste Management based in Lathen/Ems, GERMANY. from Roto Compactor Product line

  • GLES - Waste Conversion Pyrolysis System

    The Waste Conversion Pyrolysis System is well suited to handle various feedstocks.Pyrolysis of waste is the state-of-the art process providing destructive decomposition of waste materials in the absence of oxygen. Its combustion-free methodology allows us to eliminate residual and fly ash emission into the environment. GLES' leading edge design ...

    By Greenlight Energy Solutions Corp. based in San Francisco, CALIFORNIA (USA).

  • Plasco - Waste Conversion System

    The waste conversion process begins with any materials with high reclamation value being removed from the waste stream and collected for recycling. Once these high value products are removed, the municipal solid waste (MSW) is shredded and any remaining materials are removed and sent for recycling.

    By Plasco Energy Group based in Ottawa, ONTARIO (CANADA).

  • Modular Waste Water Management Plant

    The Company sizes, manufactures and installs modular waste water management plant, if required in container for quick dismantling and assembling, easy transport and storage; building sites are always short of room and our equipment is able to cope with all the waste waters in order to be the only partner for water problems. In few square meters, ...

    By Onpro AG based in Frenkendorf/Basel, SWITZERLAND. from Environment Product line

  • Model CT-D Emergency - Emergency Dry Bed Absorber Systems for Waste Gas Treatment

    The centrotherm CT-D emergency absorber was specifically designed to offer you a safe and efficient disposal of the contaminated gas exhaust of gas cabinets or gas valve boxes in the case of average. A further application area where the CT-D emergency absorber is successfully used, are processes with high volume flows and low concentrations of ...

    By centrotherm clean solutions GmbH & Co. KG based in Blaubeuren, GERMANY.

  • Premium

    HARDEN - Model TD9150 - ragger wire shredder

    Ragger Wire Shredding & Recycling Systems Harden Industries Ltd. provide customized design ragger wire recycling systems to recover steel wire and pulper waste for use as fuel. Harden Industries has been concentrating on designing and manufacturing industrial shredder for solid waste treatment since 2000′s. We have been build this system for 5 ...

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Bergmann - Model APS 1100-E - Roto-Compactor (1,100 Litre, Optionally 1,000 Litre Capacity)

    The Roto-Compactors invented by BERGMANN combine the advantage of continuous filling with the efficient collection of waste and garbage right at its source. The compaction takes place directly in the standard 1,100 litre roller bins, which can be removed from the disposal vehicles.

    By Bergmann, Heinz, e.Kfm.- Machines for Waste Management based in Lathen/Ems, GERMANY. from Roto Compactor Product line

  • Premium

    Bergmann - Model PS 1000-E (1000 Litre Capacity) - Roto Compactor

    The Roto Compactors invented by BERGMANN combine the advantage of continuous filling with the efficient collection of waste and garbage right at its source. The compaction takes place directly in a 1,000-litre PE film bag. Low space requirements and high compaction results lead to maximum cost savings as expensive and space-consuming large bins ...

    By Bergmann, Heinz, e.Kfm.- Machines for Waste Management based in Lathen/Ems, GERMANY. from Roto Compactor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you