We couldn't find any waste site equipment suppliers or service providers located in Vatican City

Here is a list of equipment results with suppliers serving Vatican City

waste site Equipment available in Vatican City

  • Premium

    CoWaste - Model SW - Remediation Cover

    CoWaste SW is easy to apply and guarantees long-term effectiveness. CoWaste SW is a technologically advanced sprayable foam of polymers and recycled fiber that forms a slurry when mixed with water. The slurry can be spray applied to smooth or irregular surfaces, steep slopes or vertical walls. CoWaste SW Foam Cover forms an uniform encapsulating ...

    By Full Service Srl based in Saletto, ITALY. from Contaminated Sites Product line

  • Premium

    Tidy Planet DEHYDRA - Maxi Bulk Food Waste Dewatering System

    Tidy Planets unique Maxi food waste macerator has the ability to process bulk loads of food wastes in timely 3 minute, 90 litre batches. The all stainless steel Maxi incorporates a large loading hopper with an automatic screw feed auger system, which drives the food into an inbuilt macerating system. This revolutionary new design allows the ...

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM. from Dehydra Food Waste Dewaterer Product line

  • Premium

    Tidy Planet GOBI - Model G3000 and G5000 - Food Waste Dryers

    These automated systems dry food and other organic waste by the use of heat and mechanical mixing. As organic and food wastes have a high moisture content (up to 98%), the weight and volume reduction is achieved through the evaporation of the water, leaving the operator with a dry, manageable end product that has been sterilised and stabilised so ...

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM. from Gobi Food Waste & Packaged Food Dryer Product line

  • BiOWiSH-Odor - Environmentally Friendly & Non-Toxic Waste Treatment

    BiOWiSH-Odor rapidly reduces odors in landfill sites and composting facilities.

    By BiOWiSH Technologies based in Cincinnati, OHIO (USA). from Waste Management Product line

  • Pump Sumps

    Carlow Precast Pump Chambers & Overflow Tanks can accommodate most practical capacities. We have developed a range of standard configurations to simplify specifying the right combination. Pump Sumps are available up to 2.4m dia. and down to 12.0m deep. Overflow / holding tanks can be arranged to suit specific site criteria accommodating almost ...

    By Carlow Precast Concrete Engineering based in Carlow, IRELAND. from Waste Water Product line

  • Skip Containers

    Skip containers are intended for the transport and storage of municipal and industrial waste. Various special modifications enable the containers to be used for other purposes (manipulation by crane at building sites, mobile storage units, etc.). Containers are supplied in a variety of styles according to the required use. They are manoeuvred by ...

    By ELKOPLAST CZ, s.r.o. based in Zlín, CZECH REPUBLIC. from Waste Management Product line

  • Moving-Base Mat Conveyor for Transferring Waste

    The effectiveness without the constraints. This type of box used to store and transfer products collection in a trailer. The set consists of a mat type background moving body with chains and bars on which collection vehicles (BOM) come to unload the product. The product is then transferred to the semi-trailer.

    By Legras Industries based in Epernay Cedex, FRANCE. from Waste Transfer Product line

  • Model ILW - Treatment and Storage System

    There are three types of nuclear waste; low level, intermediate level and high level waste. This programme covers the treatment and storage of intermediate level nuclear waste at Sellafield.

    By Sellafield Ltd based in Cumbria, UNITED KINGDOM. from Waste Management Product line

  • Aerosol - Shredding Systems

    Meltog offers a number of pre-existing solutions for the safe destruction, management and sorting of aerosol cans for either indoor or outdoor operation and for either ODS or non ODS applications. All systems comply with ATEX regulations and they can be additionally adapted to comply with localised, specific environmental requirements or site ...

    By Meltog a Division of MMco. Limited based in Leeds, UNITED KINGDOM. from Waste Management Equipment Product line

  • Skim-pak - Model 11800-DH - Flow - Control and Floating Decanter Systems

    The 11800-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11800-DH has 0.5 meters of total weir, and therefore is normally operated at a flow rate 1.4 m3/min, 370 gal/ min. Maximin flow rate is 500gpm. The 11800-DH excludes solid during the aeration ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Water & Waste Water Product line

  • Skim-pak - Model 11840-DH - Flow - Control and Floating Decanter Systems

    The 11840-DH has flow-controlled weirs with adjustable flow rate capabilities. The standard flow rate is 3 cubic meters per minute per meter of weir. The 11840-DH has 4 meters of total weir, and therefore is normally operated at a flow rate 11.2 m3/min, 2958gal/ min. Maximin flow rate is 4,000gpm. The 11840-DH excludes solid during the aeration ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Water & Waste Water Product line

  • Poul Tarp - Registration of the Household Waste Collection

    We see 5 typical methods for registration of collection of household waste. The good old way where the driver has a paper list of the route showing maybe the size of the bin and the type of the product. It might say if collection is weekly or every second week. If the operator can't empty a bin, he or she might write a message to the citizen and ...

    By Poul Tarp A/S based in Randers, DENMARK. from Waste Collection and Handling Product line

  • Waste Management

    SPIDER Environmental Services undertakes waste management from construction sites as well as leasing all the required equipment to clients that wish to undertake the waste collection by themselves. During its seamless implementation of refuse disposal initiatives, the company has developed experienced, skilled personnel and acquired the suitable ...

    By Spider Ν. Petsios & Sons S.A. based in Ioannina, GREECE. from Evnironmental Services Product line

  • TANA Shark - Waste Shredders

    Pre-shredder and secondary shredder in one package: There are some undisputed features which differentiate the TANA Shark slow speed shredders from other equivalent equipment available. Versatility is the key word in design as special attention has been paid to the machine's capability to shred most materials and produce a wide range of particle ...

    By Tana Oy based in Jyväskylä, FINLAND.

  • Tony Team - Model TT45 - Waste Baler

    The Tony Team TT45 baler produces bales of up to 40 kg, making it ideal for pubs, restaurants, hotels, supermarkets, warehouses, hospitals, colleges, fast food outlets or anywhere wanting to remove cardboard, foil or plastics from their general waste stream for recycling. This can be used as part of your waste and recycling management in ...

    By Tony Team Limited based in Derbyshire, UNITED KINGDOM. from Balers Product line

  • Titan - Model GGS5 - Static Waste Compaction System

    The GGS5 Titan Static Waste Compaction System is designed for heavy industrial use and civic amenity sites. The system may be designed to be loaded by various refuse and recycling vehicles and can be designed for all loading configurations. Manufactured to our heavy duty specification.

    By G.G. Compactors Limited based in Bognor Regis, UNITED KINGDOM. from Compactors Product line

  • Street Waste and Recycling Container

    With an increasing focus on the appearance of open spaces in parks, new housing developments and a drive to remove unsightly on street waste and recycling containers, we have created a compact and cost-effective container housing for Continental 1100 or 1280 litre containers. Taylor Street is perfect for high footfall areas and high density ...

    By Egbert H. Taylor & Co. Ltd based in Elmley Lovett, UNITED KINGDOM. from Urban Solutions Product line

  • HABA - Waste Transfer Stations

    Waste transfer station is a processing site for the temporary deposition of waste. Transfer stations are often used as places where local waste collection vehicles will deposit their waste cargo prior to loading into larger vehicles. These larger vehicles will transport the waste to the end point of disposal in an incinerator, main station or ...

    By HABA Products - Elo Group Oy based in Tampere, FINLAND. from Other Product line

  • GLES - Waste Conversion Pyrolysis System

    The Waste Conversion Pyrolysis System is well suited to handle various feedstocks.Pyrolysis of waste is the state-of-the art process providing destructive decomposition of waste materials in the absence of oxygen. Its combustion-free methodology allows us to eliminate residual and fly ash emission into the environment. GLES' leading edge design ...

    By Greenlight Energy Solutions Corp. based in San Francisco, CALIFORNIA (USA).

  • Premium

    Bergmann - Model PS 800 (800 Litre Capacity) - Roto Compactor

    The Roto-Compactor, invented by BERGMANN, are THE alternatives for an efficient and CONTINUOUS waste collection directly at the collection site. For over 20 years, they have been contributing to minimising the cost of waste handling with the highest compaction rates.

    By Bergmann, Heinz, e.Kfm.- Machines for Waste Management based in Lathen/Ems, GERMANY. from Roto Compactor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you