waste site Equipment in Italy

18 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: waste site ×

  • In: Europe ×

  • In: Italy ×

CoWaste - Model SW - Remediation Cover

by Full Service Srl     based in Saletto, ITALY

CoWaste SW is easy to apply and guarantees long-term effectiveness. CoWaste SW is a technologically advanced sprayable foam of polymers and recycled fiber that forms a slurry when mixed with water. The slurry can be spray applied to smooth or irregular surfaces, steep slopes or vertical walls. CoWaste SW Foam Cover forms an uniform encapsulating ...

Macpresse - Model MAC 1000 - Waste Paper Shredders

by Macpresse Europa S.R.L     based in Vernate, ITALY

Ideal to shred waste paper, the MAC 1000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 106 balers.

Moving-Base Mat Conveyor for Transferring Waste

by Legras Industries     Distributor in Santo Chiodo, ITALY

The effectiveness without the constraints. This type of box used to store and transfer products collection in a trailer. The set consists of a mat type background moving body with chains and bars on which collection vehicles (BOM) come to unload the product. The product is then transferred to the semi-trailer.

X-Press - Model 300

by Mil-tek Danmark A/S     Office in Bovolone, ITALY

The waste press Models 300 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ground and offshore environments.

X-Press - Model 100

by Mil-tek Danmark A/S     Office in Bovolone, ITALY

Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly ...

Model PC50 series - Balers

by Coparm Srl     based in Ferrandina (Mt), ITALY

Automatic baling presses for recyclable materials and waste. Coparm designs and manufactures automatic balers for recyclable materials and municipal solid waste from 60 to 200 hp. Applications go from small balers for supermarkets with a 2 ton/h output to large heavily constructed balers for landfill sites with a 70 ton/h output of waste. Baling ...

X-Press - Model 200

by Mil-tek Danmark A/S     Office in Bovolone, ITALY

Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly ...

X-Press - Model 400

by Mil-tek Danmark A/S     Office in Bovolone, ITALY

X-PRESS GENERAL WASTE COMPACTOR MODELS 300 AND 400. The waste press Models 300 and 400 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ...

RWL Water - Model Tipton Series - Packaged Wastewater Treatment Plants

by RWL Water LLC     Office in Padova, ITALY

RWL Water prefabricated packaged wastewater treatment plants provide complete solutions for on-site treatment.

Model PC30 series - Balers

by Coparm Srl     based in Ferrandina (Mt), ITALY

Automatic baling presses for recyclable materials and waste. Coparm designs and manufactures automatic balers for recyclable materials and municipal solid waste from 60 to 200 hp. Applications go from small balers for supermarkets with a 2 ton/h output to large heavily constructed balers for landfill sites with a 70 ton/h output of waste. Baling ...

Model PC50P series - Balers

by Coparm Srl     based in Ferrandina (Mt), ITALY

Automatic baling presses for recyclable materials and waste. Coparm designs and manufactures automatic balers for recyclable materials and municipal solid waste from 60 to 200 hp. Applications go from small balers for supermarkets with a 2 ton/h output to large heavily constructed balers for landfill sites with a 70 ton/h output of waste. Baling ...

Macpresse - Model Mac 2000 - Shredders

by Macpresse Europa S.R.L     based in Vernate, ITALY

Ideal to shred  waste paper, the MAC 2000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 110/1 – 111/1 – 111AS /1 ...

TANA Shark - Waste Shredders

by Tana Oy     Distributor in Castel San Pietro Terme /BO, ITALY

Pre-shredder and secondary shredder in one package: There are some undisputed features which differentiate the TANA Shark slow speed shredders from other equivalent equipment available. Versatility is the key word in design as special attention has been paid to the machine's capability to shred most materials and produce a wide range of particle ...

Macpresse - Model Mac 1500 - Shredders

by Macpresse Europa S.R.L     based in Vernate, ITALY

Ideal to shred  waste paper, the MAC 1500 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 108/1 baler.

Definitive Capping

by G&G Partners S.r.l.     based in Montichiari, ITALY

Permanent safety clearance of dumping sites for non hazardous waste A clay cover, as defined by Italian Legislative Decree no. 36 of 13 January 2003, is not sufficient to ensure a reliable barrier system over time. This is even more important in the case of relief products, with inclined and elevated banks, interrupted by a series of glazing ...

Numak - Petrolcontrol System for Fuel Management

by Numak Srl     based in Castello D`Argile (BO), ITALY

Petrolcontrol system recognises authorised personnel, individual drivers/vehicles for refuelling and records operations and consumption by means of transponder cards. Numak has designed Petrolcontrol system to keep company vehicles' consumption monitored and speed up refuelling without any waste of time and lines at external gas stations.

APEX - Hose Pump

by Watson-Marlow Fluid Technology Group     Office in ITALY

The newly expanded range of APEX hose pumps is ideal for aggressive and abrasive applications up to 116psi. With their seal-less, valve-less design, APEX pumps are engineered for a more competitive price/performance ratio vs high pressure hose pumps.

Model SM 414 K - Screening Machine

by Doppstadt     Distributor in ITALY

The SM 414 K is the perfect machine for small construction companies and for contractors with permanently changing screening jobs at different places. Its strengths are the compact working and transport dimensions that become important in case of narrow places and roads and its flexibility in belongings to application. Doesn´t matter if its ...

Need help finding the right suppliers?

Let the XPRTs do the work for you