zero waste Equipment available in Alabama

Available in Alabama| Near Alabama
15 Results found

We couldn't find any zero waste equipment in Alabama

Here is a list of results available in Alabama

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Management ×

  • Keyword: zero waste ×

  • Available in: USA ×

  • Available in: Alabama ×

ENVIRO-PAK - Model 3200S - Stainless Steel General Waste Compactor

by Tech Oil Products     based in New Iberia, LOUISIANA (USA)

Since 1980, ENVIRO-PAK® commercial trash compactor models have been proven to operate safely and reliably, with ZERO lost time accidents resulting from the use of our compactors, in both offshore and industrial environments.

Cyclone - Model WHE - Waste Heat Engine

by Cyclone Power Technologies, Inc.     based in Pompano Beach, FLORIDA (USA)

Cyclone’s Waste Heat Engine (WHE, pronounced “we”) recaptures heat from external sources to create steam which powers the engine. The WHE models are designed to run a grid-tied or primary electric power generator while producing ZERO Emissions. All WHE operations are currently run through Cyclone’s subsidiary Cyclone-WHE ...

AMB Ecosteryl - Model Serial 125 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 175 kg/hr (385 lbs/hr)• Volume capacity : approx. 2100 L• Length: 10m• Width : 3.5m• Height : 5.2m• Weight : 10 tons• Required floor space : 6 x 12m• Minimum ceiling height : 6m• Electric power consumption : 60 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1200 tons• Electrical ...

Dry Waste Treatment Systems

by WT ENERGY S.p.A.     based in Florence, ITALY

Instead of throwing your waste away, why not consider turning it into something more profitable?

AMB Ecosteryl - Model Serial 75 - Hospital Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 100 kg/hr (220 lbs/hr)• Volume capacity : approx. 1200 L• Length: 4.5m• Width : 4.5m• Height : 3m• Weight : 4.5 tons• Required floor space : 5 x 5.5m• Minimum ceiling height : 3.5m• Electric power consumption : 30 kWh• Electric power consumption per ton : 300-400 kWh/t• Shredder/Lifetime on Cutting Blades : 600-700 tons• ...

Waste & Recycling Carts

by Cascade Cart Solutions     based in Grand Rapids, MICHIGAN (USA)

Cascade Cart Solutions is a symbol of excellence in residential carts. Our carts have performed in the industry since 1989, and are compatible with all ANSI approved semi and fully automated lift systems. Backed with a 10 year warranty, Cascade’s carts are guaranteed to the highest standards, meeting or exceeding all ANSI requirements for ...

AMB Ecosteryl - Model Serial 250 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 300 kg/hr (660 lbs/hr)• Volume capacity : approx. 3600 L• Length: 12m• Width : 3.5m• Height : 5.2m• Weight : 12 tons• Required floor space : 6 x 15m• Minimum ceiling height : 6m• Electric power consumption : 80 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1500 tons• Electrical ...

Membrane Brine Concentration

by Modern Water - Monitoring Division     based in Cambridge, UNITED KINGDOM

The need for brine concentration has never been greater with increased focus on waste minimisation, zero liquid discharge (ZLD) and increased water recycling.

Wastech - Model WTS2500 - Thermal Reaction Process

by Greentech Solutions Inc.     based in Santa Monica, CALIFORNIA (USA)

The Wastech WTS2500. a revolutionary breakthrough in conversion technology. It’s the first two stage Thermal Reaction Process in the world, incorporating a unique thermal decomposition system, creating no toxic emissions, no negative carbon footprint and zero landfill. This highly efficient fully integrated microprocessor controlled turnkey ...

Injection Molding

by Diversified Plastics, Inc.     based in Missoula, MONTANA (USA)

Injection molding and overmolding is an extremely flexible process that dramatically reduces waste and cost when creating parts especially in mid- to high-volume runs. Large or small, complicated or simple, Diversified Plastics can deliver the molded plastic components you need — on time and on budget. Our process begins at ground zero with ...

Intereco - Electrocoagulation System

by Intereco S.n.c.     based in Candiolo (TO), ITALY

INTERECO is introducing a new technology Electrocoagulation (E.C.) to remove as sludge both heavy metals and most organic compounds.It is, at last, the industrial realization of the laboratory theory consisting of having a current pass through wastewater to make the suspended solids and most dissolved salts react as normal flocculated sludge.

Scrap Material Recycling Technology

by The David J. Joseph Company (DJJ)     based in Cincinnati, OHIO (USA)

Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

SPI Mag - Single Point Insertion Flow Meter

by McCrometer, Inc.     based in Hemet, CALIFORNIA (USA)

The SPI Mag Insertion Flow Meter provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications. Unlike conventional magnetic meters, the SPI Mag's cost is independent of pipe size.

WaistBasket

by Clean Green Technology Inc.     based in Huntington Beach, CALIFORNIA (USA)

The SWEEPER SYSTEM (Patent Pending) is a versatile, convenient and hands-free trash/debris collection bag that can be used in all outdoor sports.  Any one at any age can pick up trash/debris on land or in the water while enjoying their recreational activity.

Model HSP - Airport Runway Sweeper

by TYMCO, Inc.     based in Waco, TEXAS (USA)

Engineered specifically for superior control of Foreign Object Debris (FOD), TYMCO's Model HSP (High Speed Performance) Airport Runway Sweeper puts the power of a 250 mph controlled jet of air in your operators' hands.  Without the cost and upkeep of main brooms, el

Need help finding the right suppliers?

Let the XPRTs do the work for you