zero waste (Waste Management) equipment near Israel

  • Premium

    Tana - Model E Series - Landfill Compactors

    TANA is the first purpose-built waste compactor on the market. The TANA E Series is the result of long-term product development and proven solutions which bring remarkable benefits to the user. Full-width twin-drum construction, rigid frame construction and crushing teeth are among the unique features which set TANA landfill compactors apart from ...

    By Tana Oy Distributor in Haifa Bay, ISRAEL. from Landfill Compactors Product line

  • Viega PureFlow - Model PEX - Press Fittings Systems

    Looking for a complete plumbing solution that's easy to install and will help reduce water waste? Look no further than the Viega PureFlow PEX System. With fittings, manifolds and tubing, Viega provides everything you need for a total plumbing system. From our revolutionary Viega ManaBloc system to our press fittings for PEX tubing, the Viega ...

    By Viega based in Velika Gorica, CROATIA. from Press Fittings Systems Product line

  • Eutectic Freeze Crystallization (EFC) Process System

    The basis of the eutectic freeze crystallization (EFC) process is the existence of the eutectic point. The eutectic point is a characteristic point in the phase diagram of a salt-water mixture. At the eutectic point an equilibrium exists between ice, salt and a solution with a specific concentration. This specific concentration is called the ...

    By EFCseparations BV based in Delft, NETHERLANDS.

  • e-ROOK - Energy Generation and Management System

    Discover a system of energy generation and management of self-consumption with zero waste.

    By Cegasa based in Vitoria, SPAIN.

  • Membrane Brine Concentration

    The need for brine concentration has never been greater with increased focus on waste minimisation, zero liquid discharge (ZLD) and increased water recycling.

    By Modern Water - Monitoring Division Distributor in SPAIN. from Membrane Brine Concentration Product line

  • DPM Red - Polyethylene Damp Proof Membrane

    DPM Red is a three-layer, low density polyethylene damp proof membrane with a polypropylene reinforcing grid.The installed product protects the structure against moisture and radon from the ground. The product is suitable for use above or below ground bearing reinforced concrete slabs, and above suspended beam and block floors or precast concrete ...

    By RIW Ltd based in Binfield, UNITED KINGDOM. from Polyethylene Damp Proof Membrane Product line

  • Milton Keynes - Medical Waste

    As experts in waste management, we can provide services to safely and legally dispose of all types of medical waste. For a free quote, just call our expert team today At Milton Keynes Waste, we all know that time spent not caring for your customers is time wasted. That is why we aim to take the hassle out of your waste management with our Clinical ...

    By Milton Keynes Waste based in Milton Keynes, UNITED KINGDOM.

  • Milton Keynes - Computer Recycling

    If you are looking to recycle your business’s old computers, we have the service for you. Just call our team in Milton Keyness for full details on our computer recycling services.

    By Milton Keynes Waste based in Milton Keynes, UNITED KINGDOM.

  • EOL Tyres

    According to the World Business Council for Sustainable Development (WBCSD), a total of 1 billion end-of-life (EOL) tyres are generated every year globally.There are approximately 4 billion EOL tyres in landfill and stockpiles globally and as they do not decompose, they can be a fire risk which if not dealt with would contaminate the air with ...

    By Dena Technology based in Barnsley, UNITED KINGDOM.

  • Super - Waste Processor

    Kanyo in collaborating with Daimaru Seisakusho Co, Japan has brought in an innovative green technology for mixed waste.

    By Kankyo Cleantech LLP based in Aminjikarai, INDIA. from Waste Processor Product line

  • Grease Recovery Device Models

    Our Customer List is our Proof. We will put Goslyn up against any grease removal device models on the market for ease of use, grease recovery, durability, and reliability. Goslyn GRD's excel with any sized 3-Compartment sink and automatic dishwasher simultaneously. Goslyn models perform under the toughest grease conditions. Goslyn also recovers ...

    By Goslyn Ontario - Grease Recovery Devices based in Aurora, ONTARIO (CANADA).

  • Ethanol From Waste

    Energy is arguably the single most important issue of our time. It powers the tractors that grow our crops, our homes to keep us warm and entertained, the cars and buses that move us to and from work - we can’t do anything without it. At Emterra, we take great pride in our ability to transform waste into a green, clean, alternative energy. ...

    By Emterra Group Inc based in Burlington, ONTARIO (CANADA).

  • Model ICON Series - Waste & Recycling Carts

    Cascade's ICON Series is a symbol of excellence for residential carts in curbside waste and recycling collection programs. Our carts have performed in the industry since 1989, and are compatible with ANSI approved semi and fully automated lift systems. Backed with a 10 year warranty, Cascade’s carts are built for safety, compatibility, and ...

    By Cascade Cart Solutions based in Grand Rapids, MICHIGAN (USA). from Waste & Recycling Carts Product line

  • Scrap Material Recycling Technology

    Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

    By The David J. Joseph Company (DJJ) based in Cincinnati, OHIO (USA).

  • Pneumatech - Model LD 100 - 204 - Zero Loss Drains

    Pneumatech's Zero Loss Drain is the industrial standard for reliable condensate management with superior quality, and perhaps the simplest and most cost effective way to prevent wasting tremendous amount of energy.

    By Pneumatech based in Rock Hill, SOUTH CAROLINA (USA). from Zero Loss Drains Product line

  • Injection Molding System

    Injection molding and overmolding is an extremely flexible process that dramatically reduces waste and cost when creating parts especially in mid- to high-volume runs. Large or small, complicated or simple, Diversified Plastics can deliver the molded plastic components you need — on time and on budget. Our process begins at ground zero with ...

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA). from Injection Molding System Product line

  • Model V1-1: 1/4-4″, 900-4500 - Metal Seated Valves

    The flagship of the ValvTechnologies’ product line, the V1-1, is the valve by which all other severe service metal-seated ball valves are measured. The V1-1 design includes integral seats, RiTech® hard coatings, blowout-proof stem and live-loaded packing. Primarily used in severe service applications, V1-1 valves are ...

    By ValvTechnologies based in Houston, TEXAS (USA). from Metal Seated Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you