Waste Monitoring Applications in Europe

  • Premium

    Industrial Weighing - Statistical Process and Quality Control

    Under-filling is illegal! Overfilling does not pay. The quality of industrial filling processes varies from `stable and easy to control` to `high scatter and difficult to control`. METTLER TOLEDO has a suitable SPC or SQC system to ensure systematic monitoring and control of your filling processes, regardless of the difficulty, helping you to maintain process compliance and to control waste through overfilling.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling and polluted air is captured and neutralised by a chemical cleaning process called ‘’Stripping’’. The correct amount of chemical products needed to neutralise the polluted air has to be calculated.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Intelligent compliance solutions for retail industry

    Retailers are increasingly challenged with meeting EHS regulatory compliance obligations and an intense consumer demand for safer, more environmentally-friendly products. Nearly every aspect of a retailer`s business is impacted by EHS compliance, which requires knowledge and expertise that is far from a core skill set possessed by most of a retailer`s workforce. From sourcing products, to distribution and logistics, to employees handling regulated products, to the proper disposal of hazardous waste, a long list of EHS compliance requirements must be considered. Verisk 3E has an extensive history of leadership in serving the needs of the retail market. Nine of the top ten U.S. retailers are long-time Verisk 3E customers. 

    By Verisk 3E Office in Copenhagen, DENMARK.

  • Premium

    Investigate

    Pro-active management of incidents and complaints for efficient investigation workflow. Envirosuite’s incident intelligence platform is the link between your operation and the community. Simple and effective communication workflows allow for transparency and trust to enhance relationships and brand reputation. With all your intelligence in one place, the progress of an incident or complaint can be easily tracked, assigned and referenced at any time.

    By Envirosuite Office in Madrid, SPAIN.

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Online Monitoring for the Food & Beverage Industry

    Several on-line monitoring technologies such as non-destructive types have become increasingly important due to the increasing automation and the incorporation of new and more efficient processes in the food industry. Food quality and safety of food are the main points of interest. AppliTek builds and supplies the necessary analytical tools that will allow for a high throughput and a short response time to increase process efficiency and reduce waste, with seamless integration in the existing infrastructure.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Precision moisture analysis instruments for Hydrogen Sulfide (H2S) monitoring for landfills

    Trusted odor detection at parts-per-billion (ppb) levels. If you operate a landfill, you know that it takes constant vigilance to keep your community happy. Monitoring for hydrogen sulfide odor is no exception. When planning your strategy for hydrogen sulfide odor control, be proactive. Be prepared. Trust Jerome to give you the data you need to make the right decisions.

    By Arizona Instrument LLC Distributor in NETHERLANDS.

  • Premium

    Monitoring of mercury in waste water

    By Lumex Instruments Group Office in Wakendorf II, GERMANY.

  • Premium

    Monitoring of waste for mercury

    By Lumex Instruments Group Office in Wakendorf II, GERMANY.

  • Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. Distributor in Loughrea, IRELAND.

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. Distributor in Loughrea, IRELAND.

  • Amusement parks/arenas/tourist attractions

    Vast quantities of rubbish and waste appear rapidly in amusement parks, at major arenas or at popular tourist attractions. Litter bins are quickly overfilled, which makes the area look a mess and is inconvenient. An automated system for emptying litter bins and waste chutes enhances the environment on a number of levels.

    By Envac AB based in Stockholm, SWEDEN.

  • PEHD membrane sealing systems for retrofitting in existing landfill site

    It is also possible to retrofit a monitoring system in existing surface sealing liners without impairing the synthetic liner sheet or the immediately adjacent functional layers. For this purpose, cable trenches must be dug in the recultivation layer above the drainage layer. The detection cables are then laid in these trenches.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you