Only show results in Virginia? Ok

Waste Oil Equipment

  • INCREDISORB - Super Absorbent

    The most efficient absorbent in the most efficient absorbent class type, our powerful 100% recycled American sorbent material was successfully reviewed by the stringent U.S. E.P.A. and California Dept. of Fish & Wildlife for safe use on any body of water– Ocean, streams, lakes, reservoirs & more as well as on land! It is extremely

    By Monarch Green Inc based in Newport Beach, CALIFORNIA (USA). from Bulk Sorbents Product line

  • Free Standing Units

    The unit is made up by a stainless steel cabinet containing a commercial food waste disposer fitted with a proper design “intake hopper” to feed food waste inside the disposer and an electrical control panel which runs the whole unit by means of a suitable PLC working software which informs the operator about any possible failures or ...

    By Ecofast Italia S.r.l. based in Milano, ITALY. from Modular Food Waste Reduction System Product line

  • Tuffa - Model 1400VBWOS - Waste Oil Tanks

    Complete with: Tundish, Filter, Vent, Easy access yellow flip lid. A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.

    By Tuffa UK Limited based in Uttoxeter, UNITED KINGDOM. from Waste Oil Tanks Product line

  • WasteCaddy - Dumpster Tow

    Dumpsters that are fully loaded can easily weigh several thousand pounds and designated pick up areas could conceivably be hundreds of yards away from the compactor. Employees that are required to tackle this task without the proper equipment are at a serious risk of injury regardless of the weather outside.

    By DJProducts, Inc. based in Little Falls, MINNESOTA (USA). from Dumpster Mover, Waste Container and Bin Pullers Product line

  • Marathon Pak’ntainer - Portable & Economical Self-contained Compactor

    Marathon’s Pak’ntainer is a portable and economical self-contained compactor/container with remote power pack.It’s designed for compacting and containing wet or dry waste and simplifying waste dumping. The Pak’ntainer helps maintain a sanitary environment, while saving money, for those generating as little as 20 cubic yards ...

  • SB-SPK Line - Disposable Container

    The SB-SPK line includes two sizes for the SB line and a disposable SPK container for the disposal of special hospital waste. Solid and shock resistant at both high and low temperature, the container of the SB-SPK line guarantee an hermetic seal by means of the peripheral adhesive on the lid, single and double. The SPK container of this line is ...

    By AP Medical based in Roncadelle di Ormelle, ITALY. from Waste Containers Product line

  • Steri Lid - Waste Containers

    New Mono Lid with double bi-injected cap for the sterelization of clinical wast. Solid and shock resistant at low and high temperatures and to penetration. ADR-UN approved.

    By AP Medical based in Roncadelle di Ormelle, ITALY. from Waste Containers Product line

  • AS-LABKO - Device

    A device for indicating an oil and grease layer on the surface, for grease traps and separators of low-density liquids.

  • SC Line - Disposable Containers

    The SC line includes disposable containers for the disposal of special hospital waste and it comes in three sizes. Extremely solid and shock resistant at both high and low temperature, the containers of the SC line guarantee an hermetic seal by means of the peripherical adhesive on the lid, single and double. The lateral handles, tested to twice ...

    By AP Medical based in Roncadelle di Ormelle, ITALY. from Waste Containers Product line

  • EVO Line - Disposable Containers

    The EVO line includes disposable containers for the disposal of special hospital waste and comes in three sizes. Extremely solid and shock resistant at both high and low temperature, the containers of the EVO line guarantee a hermetic seal by means of the peripheral adhesive on the lid, single and double. The lateral handles, tested to twice the ...

    By AP Medical based in Roncadelle di Ormelle, ITALY. from Waste Containers Product line

  • Wastewater Treatment Plants in an ISO Container for 80-350 PE

    The AS-ISO MBR line of wastewater treatment plants is designed for the treatment of municipal wastewater. The treatment plant use aerobic treatment technology together with membrane separation of activated sludge from cleaned water. The plants are designed to achieve the best cleaning performance. The water cleaned in this way can be further ...

  • Model AS-TANK PP/FR - Above-Ground Storage Tanks

    Above-ground storage tanks are tanks made entirely of plastic, designed for the storage of various liquids (also as water tanks), granulates, loose materials, etc.; products for food-processing purposes; and aggressive substances and chemicals, while respecting the chemical resistance values of the material used. The plastic tanks cannot be used ...

    By ASIO, spol. s r.o. based in Brno, CZECH REPUBLIC. from Wastewater Treatment Plants for Industry - Plastic Tanks Product line

  • Model WR, WV & WP Series - Submersible Waste Water Pumps

    Head Up to 72 MTRS.Capacity Up To 1800 Lpm.Rating 0.75 To 37 Kw.Motor Oil Filled, Vertical.Winding Pvc Insulated [Rewindable]. Pump Bottom Suction.RPM 2900.Seal Dual Mechanical Seal.Supply Single Phase, 160/230 V, 50Hz Three Phase, 360/440 V, 50Hz .Solids Up To 40 MM

    By Darling Pumps Pvt Ltd based in Indore, INDIA. from Waste Water Pumps Product line

  • Pocket Line - Single Use Container

    The Pocket line presents a single use container for both sharp and cutting waste disposal. The permanent and inviolable closure that prevents waste leakage and the high container resistance guarantee top quality and safety. Pocket container is equipped by a patented double opening system and can be used by just one hand. The double opening ...

    By AP Medical based in Roncadelle di Ormelle, ITALY. from Sharps Containers Product line

  • Model 1100 - Continental Waste and Recycling Containers

    With over 1.2 million units bought, and in use by nearly nine out of ten UK local authorities, the Continental 1100 litre is the undisputed benchmark for waste and recycling containers. Stylish and easy to use, this 4 wheeled bin can be configured to your most exacting requirements, on even the most demanding waste collection rounds. From DIN ...

    By Egbert H. Taylor & Co. Ltd based in Elmley Lovett, UNITED KINGDOM. from Continental Trade Product line

  • VIT Clostridium Perfringens - Fast Identification and Quantification of Clostridium Perfringens

    Rapid and specific identification of Clostridium perfringens. C. perfringens is numbered to the group of anaerobic bacteria which are abled to survive a long time even under bad environmental conditions by formation of spores. The bacteria can be found everywhere in environment, predominantly in soil but also in human and animal intestinal tracts. ...

    By Vermicon AG based in Munich, GERMANY. from Wastewater Product line

  • New Easy City Containers

    New Easy City containers are designed for the city and for household use. They can be positioned easily into both new urbanization and historical contexts. Due to their large volume (from 2250, 3000, 3750 lt), it is possible to drastically reduce the number of containers present in the streets and due to their modular concept, it is possible to ...

    By Nord Engineering s.r.l. based in Caraglio - CN, ITALY. from Containers Product line

  • Calcium/Potassium Polysulfide – Precipitant for Removing Heavy Metals from Process Wastewater

    Calcium/Potassium Polysulfide (REMOTOX-K), a newly available product effective against a broad spectrum of heavy metals, even in the presence of strong chelates or complexes. Hexavalent chromium is easily removed and does not need to be reduced to trivalent levels prior to precipitation. It does not contain dithiocarbamate or its related salts. ...

    By Graus Chemicals, LLC based in Glendale, ARIZONA (USA).

  • Model 200 Lt. - Hot Dip Galvanized Waste Container

    The body and lid are manufactured from a single piece of 1.50 mm. thick iron sheet. The body is twisted  from two pieces of iron sheet and reinforced by being pressed. The opening of the body is surrounded by reinforced profile. The lid is laminated from a single piece of iron sheet  in presser and reinforced. There are trunnions for ...

    By Teksin based in Selçuklu, TURKEY. from Hot Dip Galvanized Waste Container Product line

  • Underground Waste Container System with Jack

    System with jack provides the waste to be taken underground by giving the possibility use to municipalities existed collection vehicles.It provides the ability to use comfortably alongside the image of modern city furniture, ecological and aesthetic.Just the throwing trash chimney is visible on the part above ground, the major containers are ...

    By Teksin based in Selçuklu, TURKEY. from Underground Waste Containers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you